Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: My new, low tech, low budget project.  (Read 2174 times)

0 Members and 1 Guest are viewing this topic.

Winston Smith

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4066
  • AKA Edward Jennings
    • "Our Luxor B&B" Luxor life, slice by slice.
My new, low tech, low budget project.
« on: November 30, 2016, 12:25:55 AM »

Hello again. Today, I'm looking for a Hohner PA reedblock with a metal slide. If you have anything that's hanging about and looking lonely, I'd be very interested in it. Again I might be persuaded to part with some cash for one! (It needs to have at least one set of holes which go all the way along.)
Seeing as this is my first go at changing the pitch of reeds, I'm taking Anahata's warning (about destroying possibly rare reeds) to heart, and am determined not to do so. Obviously I don't have all the techy stuff, like the powered glass tuning table, with the specially milled aluminium test blocks, but I've cobbled together a set of bellows fastened to some relatively straight plywood, and now I'm making a multi-chambered test bed for all the individual reeds sizes which I'm having a go at.
Of course, the jig-saw is borrowed from my favourite BIL, and I'll have to try to cadge some felt off my arts and crafts sister to help seal the thing against the table and the reed.
Here's a video of the sawing, notice the Health and Safety gloves!!

 https://www.youtube.com/watch?v=BaHmRFT1RR0&feature=youtu.be
Logged
At last, broken and resigned to accept conformity.
Oh, how I LOVE Big Brother!

Broadland Boy

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1243
  • Awful noises from Pokerwork, HA114G, BbEb Liliputs
Re: My new, low tech, low budget project.
« Reply #1 on: November 30, 2016, 01:07:29 AM »

Someone else stockpiling for the woodburner  :o

Joking apart Edward, the only thing gloves like that will do if you should accidentally touch the blade is to make any injury much more severe and more difficult to treat due to entanglement with the teeth.

One of my customers was forced by a visiting Environmental Health Officer to ensure his employed butchers wore (the then newly available) Kevlar woven gloves when using the bandsaw - we had the lady back and I put the forefinger of a simulated hand (consisting of four sausages, a lump of pork and a broomstick in a glove) through the blade. After fitting a new blade and a good clean up of the carnage on and around the saw we presented the lady with a pristine new pair of gloves and asked her to demonstrate how the task was done safely, as none of us with years in the business of using such saws had any idea - gloves can be so dangerous if used with the wrong intentions - and I'm not talking tea cosy injuries from the HSE statistics either  ;D

You look to be making a nice job and I'll bet those drilled holes are clearance size for the blade, bought, bartered or found the drill on the side of the road  ;D
Logged
Richard A
Venit ventus contrarius ventus egrediente,
Omnes prope quid ventum est circa

Psuggmog Volbenz

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 318
    • musical whimsy
Re: My new, low tech, low budget project.
« Reply #2 on: November 30, 2016, 08:14:41 PM »

Too bad that you don't have a treadle saw.
https://m.youtube.com/watch?v=9pOriZHRA0U
Logged
I'm squeezin' and they're wheezin': old junker boxes

Garry Probert

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 296
Re: My new, low tech, low budget project.
« Reply #3 on: November 30, 2016, 08:32:26 PM »

Edward you carry on mate,what could possibly go wrong lol   
Logged

Winston Smith

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4066
  • AKA Edward Jennings
    • "Our Luxor B&B" Luxor life, slice by slice.
Re: My new, low tech, low budget project.
« Reply #4 on: November 30, 2016, 09:14:35 PM »

Richard, I did actually find the drill bit! It was in a part set which I found while moving some rubbishy stuff from a lady friend's garage (my wife was with me at the time, don't get excited!). I also came away with quite a few other bits and bobs which might come in useful. (I wouldn't normally use gloves for close semi-intricate work, as I need to be careful anyway. But I anticipated getting slated by the H&S police, lol.)

Psuggmog Volbenz, I'm sure you just like to rub it in! Even if I had one of those lovely old machines, I've nowhere to keep or use it. My cupboard/store/workshop floorspace is only has about 5'x5' between the shelving, and it already contains my workmate, a stand-up toolbox and a folding chair!!!!

Garry, What could possibly go wrong? Finding your way in the dark always results in a few pitfalls, especially when your gear is not quite right, to put it mildly, for the job in hand. I've spent a lifetime making do and mending, and I'm hardly likely to change very much now. Onward and upward, eh?
Logged
At last, broken and resigned to accept conformity.
Oh, how I LOVE Big Brother!

Garry Probert

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 296
Re: My new, low tech, low budget project.
« Reply #5 on: November 30, 2016, 09:51:26 PM »

Hi edward your attitude is admirable ,only having a little fun and sometimes low tech can be most enjoyable
keep us updated with the results           
Logged

Broadland Boy

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1243
  • Awful noises from Pokerwork, HA114G, BbEb Liliputs
Re: My new, low tech, low budget project.
« Reply #6 on: November 30, 2016, 11:48:52 PM »

You didn't buy the drill  :Ph, my faith in the world order is restored Edward  ;D although that needless waste of electricity hurt, don't turn the jigsaw on, just move the job up and down very rapidly over the stationary blade to look like  :|bl and then need a  :|glug

I guessed it was a tongue in cheek H&S comment but so many youngsters seem to regard Yewtube or other internet source as 'gospel' advice and even some more experienced folk seem to regard wearing some sort of 'safety' device like glove, mask or eye protection as all they need to do to protect themselves without realising the downside of not thinking it through!

Did you have a drill stand to put those starting holes in with? in which case I would probably have drilled four holes at the corners and just sawed between them, curved corners in a reed chamber always round the sound nicely to my ear compared to square'uns.

For the ultimate eco effect you could always search neighbours firewood piles for an appropriate beetle larvae to train up........

With which I'll get me coat and wish you good progress with the project  :||:
Logged
Richard A
Venit ventus contrarius ventus egrediente,
Omnes prope quid ventum est circa

Psuggmog Volbenz

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 318
    • musical whimsy
Re: My new, low tech, low budget project.
« Reply #7 on: December 02, 2016, 06:44:14 AM »

Edward, unfortunately, I don't own a vintage treadle fretsaw. I bought a firedamage scrollsaw for 10USD and coverted it to footpower. I usually use a coping saw and hand cut the openings after initially using a hand powered "eggbeater" drill.  I do have a swiss made jig saw similar to the one you used in your video, but it powered by compressed air.
Logged
I'm squeezin' and they're wheezin': old junker boxes

Garry Probert

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 296
Re: My new, low tech, low budget project.
« Reply #8 on: December 02, 2016, 09:29:23 AM »

Hi edward low tech with a junior hacksaw scrap wood spacers ,you can make a simple jig just drop in and glue and it's reusable
and no power tools   
Logged

Garry Probert

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 296
Re: My new, low tech, low budget project.
« Reply #9 on: December 02, 2016, 10:00:43 AM »

Hi edward not my idea in the video at 1.45 has what looks like nylon spacer block i used a less sophisticated scrap plywood version
also has the benefit of a square edge and the ends can be customised to any size ,i wanted to test if additional volume would alter the sound
of the reeds.
I,m currently making a version with a rod/wing nut and spacers ,so one could adjust the width by just dismantling and adding a spacer providing its just below the glue joint you can use practically anything ,and just invert after glueing to stop gluing the whole thing together lol 


 http://www.youtube.com/embed/6Qmni8h-kpY?autoplay=1
Logged

playandteach

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3526
  • Currently a music teacher in a high school.
Re: My new, low tech, low budget project.
« Reply #10 on: December 02, 2016, 01:51:18 PM »

Couldn't bring myself to watch beyond the first few seconds. What happens if the jigsaw vibrated out of the workmate? I've gone soft after too many near misses.
Logged
Serafini R2D2 GC, Serafini GC accs 18 bass

Winston Smith

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4066
  • AKA Edward Jennings
    • "Our Luxor B&B" Luxor life, slice by slice.
Re: My new, low tech, low budget project.
« Reply #11 on: December 02, 2016, 02:04:24 PM »

It would drop to the floor! I'm not quite as daft as I look, you know?

Anyway, we should maybe take a leaf from the Muslim's book (not literally) and say, "Alhamdulillah" which means (more or less) thank God for everything he sends, as there's some good to find in it, even if it's not immediately apparent.

Today, I'm more aware of that, as last night I bid on two items on eBay, both of which went for more than I could afford to, or was willing to, pay. But, before I retired for the night, I came across something else (seemingly a real oddball!) which was more in my price range and more interesting, and which I couldn't have bid on if I'd spent my stash on one of the other things. This morning my offer was accepted, and I have Number 2 daughter collecting it, even as I write!

Strange but true!
Logged
At last, broken and resigned to accept conformity.
Oh, how I LOVE Big Brother!
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal