Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Fingers catching on buttons  (Read 1764 times)

0 Members and 1 Guest are viewing this topic.

KLR

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 640
Fingers catching on buttons
« on: December 03, 2016, 01:10:45 AM »

My fingers tend to catch against the sides of the buttons on my Hohner Gaelic IVS.  Even my Trichord is better in this respect, I think.  Is there something that can be done to improve this - sanding the buttons into more of a mushroom shape, perhaps, or just replacing them in toto?  It's more of a problem in the lower register, I notice.  Hard to slide from button to button.  Getting a bit of oil on the fingers helps but I'd like a permanent solution. 
Logged

gettabettabox

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 684
Re: Fingers catching on buttons
« Reply #1 on: December 03, 2016, 01:57:58 AM »

Worth checking button spacing, measure centre to centre over 10 button distance on the boxes you play..and comparing?
Next culprit is button profile, domed? Flat? Edged?
Consistent positioning with different accordions?
Just some ideas....
Logged

gettabettabox

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 684
Re: Fingers catching on buttons
« Reply #2 on: December 03, 2016, 02:04:01 AM »

If the main problem is non-smooth sliding across rows, then it's likely a button profile issue or differing spring tension on rows, ....not uncommon on Hohner which use different springs for rows, the intention being to equalise.
Light actions facilitate sliding.
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Fingers catching on buttons
« Reply #3 on: December 03, 2016, 08:07:24 AM »

The simplest thing to adjust would be the button height and travel.

I that doesn't work and you need a more rounded top then button replacement is the way to go. I've never tried sanding buttons to change their shape but it could be very time consuming especially if you want to get a nice smooth finish.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

KLR

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 640
Re: Fingers catching on buttons
« Reply #4 on: December 04, 2016, 10:07:51 AM »

The buttons are flat topped, I'm blaming them.  Action doesn't look too high, it's very easy to play, but sliding, whether down a row or across, often takes way more effort than it should. 

I'd think replacing the buttons would be simpler than messing around with height/travel, that kind of thing seems way too technical for a simple soul like myself.   ;D  Are these buttons screwed down, do you think?  I gather it's from the same factory that built the Ama/Prima Tonas, Swiss IIRC.  The Trichord's buttons can just be levered off, I know because I took them all off a few times, to raise the height, and then back again, and finally to set the black ones at the top out of harm's way, those things are really irritating, speaking of sliding, it's basically out of the question.  The hash marks on my Morino Club's gleichton don't get in the way at all. 
Logged

boxer

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 380
  • B/C Pokerwork - ultimate ceili box
Re: Fingers catching on buttons
« Reply #5 on: December 04, 2016, 02:16:09 PM »

you mentioned using oil.  I suspect this would be a bit messy.  There's a proprietary product called Fast-Fret, aimed at fretted instrument players but quite useful on keyboards - I apply a bit to my keyboards now and again when I can remember to.  It's non-sticky and makes it a bit easier to slide button to button.  Borrow some from a guitarist of your acquaintance - a lot of strummers seem to use the stuff.  It might help.

Logged
Nuage, Tommy, Cairdin, 
Double Ray DLX 21x12, Black Dot,
Pre-Erica, Pokerwork
plus various stringed things

KLR

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 640
Re: Fingers catching on buttons
« Reply #6 on: December 04, 2016, 09:45:48 PM »

It's just oil from the side of my nose I'm talking about, a tip I picked up from these boards.

I use Fast Fret on my tenor banjo strings, they last a bit longer that way.
Logged

boxer

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 380
  • B/C Pokerwork - ultimate ceili box
Re: Fingers catching on buttons
« Reply #7 on: December 05, 2016, 11:11:30 AM »

that's a trick joiners used to lubricate a plane's sole
Logged
Nuage, Tommy, Cairdin, 
Double Ray DLX 21x12, Black Dot,
Pre-Erica, Pokerwork
plus various stringed things

Ebor_fiddler

  • Chris
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2340
  • Hohner 1040 C One-Row, Sandpiper D/G, Liliput C/F
    • Ebor Morris
Re: Fingers catching on buttons
« Reply #8 on: December 10, 2016, 10:41:18 AM »

Sole Music?  :-[
Logged
I'm a Yorkie!
My other melodeon's a fiddle, but one of my Hohners has six strings! I also play a very red Hawkins Bazaar in C and a generic Klingenthaler spoon bass in F.!! My other pets (played) are gobirons - Hohner Marine Band in C, Hohner Tremolo in D and a Chinese Thingy Tremolo in G.
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal