To go into more detail with what Theo says, instead of tuning every reed up a full tone, you can pretty much get the G row reeds and make them your new D row, and do the same with the C becoming you're new A row. Doing it this way ends up with only needing to tune 8 reeds up (or down) a full tone instead of all 42. You'd then also have to tune 13 reeds a half tone and then the remaining 19 tunes will already be at the correct pitch. A few reeds will have to be turned around to reverse the push/pull notes and the highest button on the new D row will need new reeds (the C#/F# button).
All these numbers of course will have to be multiplied by the number of voices on the treble side.
EDIT: I should mention that this is related to the theoretical discussion of doing this tuning change. I have not done it myself and am not recommending that it be done, but if it was done, this way would be the way that would require the least reed retuning.