Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1] 2   Go Down

Author Topic: Ting oil  (Read 4680 times)

0 Members and 1 Guest are viewing this topic.

911377brian

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1518
Ting oil
« on: December 05, 2016, 03:46:56 PM »

Anyone had any hands on experience of using Tung oil or Danish oil on a melodeon?
Logged

911377brian

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1518
Re: Ting oil
« Reply #1 on: December 05, 2016, 03:48:18 PM »

Heading should read TUNG oil...just in case there is such a thing as Ting oil....
Logged

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: Ting oil
« Reply #2 on: December 05, 2016, 03:51:20 PM »

Heading should read TUNG oil...just in case there is such a thing as Ting oil....

If there were it would be just the ting  ;)

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: Ting oil
« Reply #3 on: December 05, 2016, 03:54:08 PM »

Slightly more helpful, I've used this stuff

http://www.axminster.co.uk/liberon-finishing-oil-ax22547

John MacKenzie (Cugiok)

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2360
  • Fettling... Learning to reed and right.
Re: Ting oil
« Reply #4 on: December 05, 2016, 03:58:35 PM »

I use that for finishing things that I've turned on the lathe. It's very good. Can't swear to it, but I think it may contain some Tung Oil.

Sir John
Logged
There is no beginning to my talent :)



: Hohner Club Modell 1. Bb/Eb, de-clubbed : Early Hohner Pressed Wood A/D : 1930's Varnished wood G/C:  Hohner Erika C/F: Bandoneon tuned D/G Pressed wood: Koch F/Bb; G/C Pre Corso

malcolmbebb

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2628
  • In dampest Dorset, on the soggy south coast.
Re: Ting oil
« Reply #5 on: December 05, 2016, 04:09:50 PM »

Heading should read TUNG oil...just in case there is such a thing as Ting oil....

Used on bells, apparently.
Logged
Dino BPII.
"Tradition is not the worship of ashes, but the preservation of fire."

Stiamh

  • Old grey C#/D pest
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3611
    • Packie Manus Byrne
Re: Ting oil
« Reply #6 on: December 05, 2016, 05:07:22 PM »

I've used tung oil on a deck (don't think I've ever seen one of these in the UK) built of western red cedar. I added powdered pigment to give the oil a beautiful red colour and got down on my hands and knees to apply it. The soles of my feet were a lovely deep hue for weeks afterwards. I suppose that makes it feet-on experience.

I would choose something different for a melodeon though. I have made lots of use of a locally prepared formulation of linseed oil with drying agents. Lovely to work with and the smell will instantly bring to mind the first proper cricket bat you owned and on which you lavished such care as a small boy.

You have to be careful how you store or dispose of oil-soaked rags (tung and linseed) though. If you leave them scrunched up they can spontaneously combust!

Thrupenny Bit

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 7232
  • happily squeezing away in Devon
Re: Ting oil
« Reply #7 on: December 05, 2016, 05:29:09 PM »

Sounds like they contain Genuine Turpentine as a solvent, that oxidises and can catch fire.
I use this as a 10% Raw Linseed oil mix to put on my outside wooden garden furniture, and also on exposed internal beams in my old house.
My friend's wife tipped me off as she used it on their new oak window frames. In that instance it can have the Linseed oil increased to 30% as no one is sitting on it and the linseed oil increases the protection.
Both Genuine Turpentine and Raw Linseed Oil can be bought from a good builders merchant, and not to be confused with turps substitute and boiled linseed oil!

The oil can leave a residue on the surface of my furniture, and a friend once used Danish oil on her outdoor furniture and couldn't use it for ages as it too was oily to the touch.

I would guess that both wouldn't be suitable for a melodeon, or at least trial it first to make sure it soaks in.
Q
Logged
Thrupenny Bit

I think I'm starting to get most of the notes in roughly the right order...... sometimes!

John MacKenzie (Cugiok)

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2360
  • Fettling... Learning to reed and right.
Re: Ting oil
« Reply #8 on: December 05, 2016, 05:56:28 PM »

Linseed oil, mixed with white spirit, is very good for renovating Caithness slate hearths. Just a thought.


Sir John
Logged
There is no beginning to my talent :)



: Hohner Club Modell 1. Bb/Eb, de-clubbed : Early Hohner Pressed Wood A/D : 1930's Varnished wood G/C:  Hohner Erika C/F: Bandoneon tuned D/G Pressed wood: Koch F/Bb; G/C Pre Corso

Andy Next Tune

  • aka Andy Wooles
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1127
  • Melodeon with Accidentals? Make a PI Claim!!!
    • www.shavethedonkey.co.uk
Re: Ting oil
« Reply #9 on: December 05, 2016, 06:42:32 PM »

Like Lester,  I've used Liberon Finishing Oil on a melodeon (Erica with  tatty celluloid stripped back to the wood).

I believe Rees also uses this to finish the one-rows he builds.
Logged
Andy, from the now ex-County Palatine of Cheshire

Caring for a European community of melodeons from France, Italy, Germany, Wales and Suffolk!

sammypenn

  • Member
  • *
  • Offline Offline
  • Posts: 48
Re: Ting oil
« Reply #10 on: December 05, 2016, 07:04:00 PM »

 The very best oil finish I use on all sorts of instruments, including the Maccaferri style guitars I make, is Birchwood/casey's  "Tru-Oil". gun stock finish. easy to use and dries very hard. (:)
Logged

Roger Hare

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 949
  • Urmston, Lancashire, U.K. éééé
Re: Ting oil
« Reply #11 on: December 05, 2016, 07:09:00 PM »

I've used tung oil on a deck...I suppose that makes it feet-on experience.

I would choose something different for a melodeon though....

I've used Danish oil (some preparations of which do contain Tung oil) on 'old boats',
usually on the masts, capping rails and other external woodwork [Not decks though,
Stiamh clearly frequents far posher yachts than I do]. It's great, far easier to apply
than varnish, and very easy to 'touch-up' if scratched or grazed, but, preparation,
preparation, preparation:

In my experience, you will need to remove all traces of pre-existing varnish before
applying the oil, otherwise the stuff simply will not stick...

I don't know if it would be suitable for use on a melodeon - if you park your melodeon in
a marina subject to exposure to salt, high humidity, etc. it's probably the dogs wotsits
but I guess you don't?

Roger
Logged
My ABC tune collections can be found here (GoogleDrive) & here (Dropbox).

For more about Manchester Morris, The Beech Band Folk Club or anything else,  please use the private messaging facility.

Thrupenny Bit

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 7232
  • happily squeezing away in Devon
Re: Ting oil
« Reply #12 on: December 05, 2016, 07:29:14 PM »

There's another thread running currently, Nick CB is asking what he used when he built his Pariselle.
Look up 'Polishing'. That might be of some use.
Q
Logged
Thrupenny Bit

I think I'm starting to get most of the notes in roughly the right order...... sometimes!

Stiamh

  • Old grey C#/D pest
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3611
    • Packie Manus Byrne
Re: Ting oil
« Reply #13 on: December 05, 2016, 07:32:32 PM »

I've used Danish oil (some preparations of which do contain Tung oil) on 'old boats',
usually on the masts, capping rails and other external woodwork [Not decks though,
Stiamh clearly frequents far posher yachts than I do].

The deck in question:  (:)

Broadland Boy

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1243
  • Awful noises from Pokerwork, HA114G, BbEb Liliputs
Re: Ting oil
« Reply #14 on: December 06, 2016, 02:01:37 AM »

So Brian, one ting inevitably leads to another.........

Depends on the result you are looking for, cleaning, feeding, coating, and what is already on the box. Tung is a fairly thin wet oil which surface drys leaving some waxy protection in the grain but doesn't skin or mechanically protect the surface noticeably, garden seat or boat deck feeding and water resisting it does well, don't think it would devastate a shellac or varnish surface but doubt it would do much good to the look of a Hohner either  :-\

A good coat inside yer bellows might help if you plan much carolling in the rain............
Logged
Richard A
Venit ventus contrarius ventus egrediente,
Omnes prope quid ventum est circa

Roger Hare

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 949
  • Urmston, Lancashire, U.K. éééé
Re: Ting oil
« Reply #15 on: December 06, 2016, 04:54:50 AM »

The deck in question:  (:)

Ah! Laugh's on me! Being a non-gardening boatie, I never even thought of garden decking...

R
« Last Edit: December 06, 2016, 04:56:21 AM by lachenal74693 »
Logged
My ABC tune collections can be found here (GoogleDrive) & here (Dropbox).

For more about Manchester Morris, The Beech Band Folk Club or anything else,  please use the private messaging facility.

911377brian

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1518
Re: Ting oil
« Reply #16 on: December 06, 2016, 10:35:34 AM »

Who would have thought that a typo could generate so many chuckles? (:) It does seem though that no one has actually tried Tung oil on a wooden melodeon. Tru Oil suggested by Sammypen seems interesting; if it works on a guitar .......
Logged

boxcall

  • You got to love it!!!
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1801
Re: Ting oil
« Reply #18 on: December 06, 2016, 06:20:59 PM »

reading the first link, a little ways down the page.
"when to consider" using tung oil.
last sentence
"Tung oil is usually chosen for its aesthetic appeal rather than its wearability."

wiping oil mix would be more durable IMO and easier to apply as it dries faster.
I have use this type of tung oil mix on my melodeon over a stain.
I have also used it on hardwood boxes I've made, building up lots of coats( with sanding and tack in between of course).
« Last Edit: December 06, 2016, 06:34:51 PM by boxcall »
Logged
Hohner 1040 C, Beltuna one row four stop D, O'Byrne Dewitt/ Baldoni bros. D/C#, Paolo soprani "pepperpot" one row D

Gromit

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 588
Re: Ting oil
« Reply #19 on: December 06, 2016, 07:04:31 PM »

I think for "wearabilty" I'd go for a lacquer - oil finishes are nicer, less like plastic but don't protect as well.

A pre-catalysed lacquer is the easiest wood finish that I've used but unfortunately isn't available in small amounts and doesn't have a long shelf life.
Logged
Pages: [1] 2   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal