Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Wax heaters  (Read 3447 times)

0 Members and 1 Guest are viewing this topic.

Rog

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2525
  • Repair and tuning in Hants
Wax heaters
« on: January 28, 2017, 01:31:14 PM »

Bit of an old cheshnut this one, but what are people's wax heater solutions?
I currently use an old Le Creuset saucepan and a low ampage electric stove. The pan stays hot for ages. Previously had one of those wax heaters you can get on eBay for £20 or so, but it had a pressure button in the bottom of the heater container, so that the weight of the pan activated the heater. The problem was that wax found its way in there and once the wax set that was the end of the heater.
I pinched the stove idea from a vid of an Italian maker who used the same set up (stove and pan) but if any wax gets on the ring it smokes, so it's not ideal. My wax heater never really got quite hot enough, either, so I was never that happy with it. So wondering if anyone else has a perfect solution? A better wax heater with thermo control to, say, 250C,  and no stupid cutoff system might work. But I'm maybe not looking in the right place. Maybe I need to search for some other niche craft tool that would do the job.

xgx

  • Bagpipes & Musette Boxes... and Banjos, luv 'em!
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1157
Re: Wax heaters
« Reply #1 on: January 28, 2017, 02:25:10 PM »

Just an idea .... http://www.wilko.com/slow-cookers/wilko-everyday-value-slow-cooker-15l/invt/0316165  ... 1p cheaper at TJ Hughes ;)

Alternatively would a the plate from an old filter coffee maker do the job?
Logged
Graham

Socio-Demographic:   Graduate, Coffin Dodger
 Location: N Cambs/S Lincs - UK

malcolmbebb

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2628
  • In dampest Dorset, on the soggy south coast.
Re: Wax heaters
« Reply #2 on: January 28, 2017, 02:39:14 PM »

1.5 litres - that would make Charlie smile.

I am presently using an el cheapo Ebay salon heater.
It works for me, the wax flows nicely and there is no smoke. It is convenient, better than the water bath I was using before and considerably less exciting than Charlie's method.

But it may not be robust enough for your use, my usage is quite modest.

PS in a previous existence I was responsible for arranging lung function tests for solder users, I don't do rosin fumes.
« Last Edit: January 28, 2017, 02:41:18 PM by malcolmbebb »
Logged
Dino BPII.
"Tradition is not the worship of ashes, but the preservation of fire."

playandteach

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3526
  • Currently a music teacher in a high school.
Re: Wax heaters
« Reply #3 on: January 28, 2017, 03:11:08 PM »

Can you explain the rosin fumes? Do you wear a mask, or use was without rosin... something else? I'm just about to wax reeds in a Hohner student PA. 4 reed blocks in total. I was going to use Charlie's wax sticks, with a half mask with filters:
http://www.ebay.co.uk/itm/201779174863
which is why I'm looking at this thread.
Anything else I should do?
« Last Edit: January 28, 2017, 04:54:30 PM by playandteach »
Logged
Serafini R2D2 GC, Serafini GC accs 18 bass

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Wax heaters
« Reply #4 on: January 28, 2017, 03:19:54 PM »

You don't want to get yourself sensitised to rosin fumes.  Most common cause of occupational asthma according to a doctor friend.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Pete Dunk

  • Typo Expert
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3706
Re: Wax heaters
« Reply #5 on: January 28, 2017, 03:36:21 PM »

I used a single egg poacher, once ready it stays hot for quite a while, may need reheating if you're doing a whole box and you're as slow as me!

Logged
Squeezing on the Isle of Oxney, UK
Primo (Serenellini) D/G
Isis D/G
Hohner B/E, G/C, C/F, Bb/Eb G/C/F
Liliputs D/G (G scale), C/F, Bb/Eb, Albrecht Custom D/G (G scale)

malcolmbebb

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2628
  • In dampest Dorset, on the soggy south coast.
Re: Wax heaters
« Reply #6 on: January 28, 2017, 04:04:03 PM »

Can you explain the rosin fumes? Do you wear a mask, or use was without rosin... something else? I'm just about to wax reeds in a Hohner student PA. 4 reed blocks in total. I was going to use Charlie's was sticks, with a half mask with filters:
http://www.ebay.co.uk/itm/201779174863
which is why I'm looking at this thread.
Anything else I should do?
Avoid anything that causes the wax to smoke, and ensure good ventilation so that you don't breathe any fumes that do arise.
That's what I do, nothing fancy.

Electrical solder uses the same or a similar rosin. I've never seen masks used, but where ventilation isn't available some have a portable charcoal air filter.
Logged
Dino BPII.
"Tradition is not the worship of ashes, but the preservation of fire."

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: Wax heaters
« Reply #7 on: January 28, 2017, 04:13:05 PM »

Can you explain the rosin fumes? Do you wear a mask, or use was without rosin... something else? I'm just about to wax reeds in a Hohner student PA. 4 reed blocks in total. I was going to use Charlie's was sticks, with a half mask with filters:
http://www.ebay.co.uk/itm/201779174863
which is why I'm looking at this thread.
Anything else I should do?

When waxing lots of reeds I wear one of these, otherwise, single reeds etc, I have a fan that blows the fumes away.

Rog

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2525
  • Repair and tuning in Hants
Re: Wax heaters
« Reply #8 on: January 28, 2017, 08:10:49 PM »

Yes I've got a similar mask...but it is certainly worth reminding people of the dangers of using rosin.
« Last Edit: January 28, 2017, 08:12:55 PM by RogerT »
Logged

Graham Spencer

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3548
  • MAD as a wet Hohner........
Re: Wax heaters
« Reply #9 on: February 05, 2017, 02:13:06 PM »

I recently acquired a  cheap Silver Crest cosmetic wax heater from Lidl, partly on the grounds that if it didn't do the job it wouldn't have broken the bank. Today I tried it out on a set of Hohner bass chord reeds using Charlie Marshall's block wax. Super results; it kept the wax at a nice running consistency with no sign of smoking or discolouration. 26 euros well spent, I reckon.

Graham
Logged
Among others, Saltarelle Pastourelle II D/G; Hohner 4-stop 1-rows in C & G; assorted Hohners; 3-voice German (?) G/C of uncertain parentage; lovely little Hlavacek 1-row Heligonka; Bâ™­/Eâ™­ Koch. Newly acquired G/C Hohner Viktoria. Also Fender Jazz bass, Telecaster, Stratocaster, Epiphone Sheraton, Charvel-Jackson 00-style acoustic guitar, Danelectro 12-string and other stuff..........

Squeezing in the Cyprus sunshine

playandteach

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3526
  • Currently a music teacher in a high school.
Re: Wax heaters
« Reply #10 on: February 05, 2017, 02:15:07 PM »

What did you use for applying the wax?
Logged
Serafini R2D2 GC, Serafini GC accs 18 bass

Graham Spencer

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3548
  • MAD as a wet Hohner........
Re: Wax heaters
« Reply #11 on: February 05, 2017, 03:45:14 PM »

At the moment I'm still using Charlie's paintbrush method, but with the apparently consistent temperature of this pot I'm keen to try other tools.....

Graham
Logged
Among others, Saltarelle Pastourelle II D/G; Hohner 4-stop 1-rows in C & G; assorted Hohners; 3-voice German (?) G/C of uncertain parentage; lovely little Hlavacek 1-row Heligonka; Bâ™­/Eâ™­ Koch. Newly acquired G/C Hohner Viktoria. Also Fender Jazz bass, Telecaster, Stratocaster, Epiphone Sheraton, Charvel-Jackson 00-style acoustic guitar, Danelectro 12-string and other stuff..........

Squeezing in the Cyprus sunshine

Andrius

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 180
Re: Wax heaters
« Reply #12 on: February 06, 2017, 09:24:39 PM »

I have tested two about the same melodeons, wax versus PVA glue.
Not possible to feel difference to me.
Logged
Koch Bb/Eb 12b 3v : Koch A/D 8b 2v : Koch C/F 12b 2v : Hohner Erica C/F 8b 2v : Hohner Erika C/F 2.4 row 8b 2v : Hohner early pre-Corona F/Bb/Eb 12b 2v: Hohner Liliput 2.4 row Bb/Eb 8b 2v : Hohner Club III BS C/F 2.7 row 8b 3v : Galotta D/G 8b 2v : Meinel & Herold G/C/F 16b 2v : Unkn G/C 8b 2v : Petersburg accordion F/Bb/Eb 16b 3v: Petersburg accordion G/C/F 16b 2v : Bandoneon Alfred Arnold 128 tone 2v : Bandoneon Wilhelm König 144 tone 2 v

Kimric Smythe

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 712
    • Smythe's Accordion Center
Re: Wax heaters
« Reply #13 on: February 11, 2017, 05:40:39 PM »

There are small laboratory heaters like this one http://www.tmart.com/High-Precision-Digital-Display-Constant-Temperature-Electronic-Heating-Plate-200-200-110V_p335012.html?cc=USD&fixed_price=us_us&gclid=CMnZjNrJiNICFU5tfgodGQ0Acg and this for the budget minded http://www.hometrainingtools.com/electric-hotplate?fee=2&fep=3943&gclid=CKnAnJTKiNICFUpNfgod9KQACg. These are temp controlled and the tops can be wiped off to avoid wax in the heater.
 I modified a temp controlled soldering  iron https://www.google.com/search?client=safari&rls=en&q=temp+controlled+soldering+iron&ie=UTF-8&oe=UTF-8#q=temp+controlled+soldering+iron&tbm=shop&spd=16793322228161656269 to wax with so you get the fast heating and no smoke. Hammered the tip flat and riveted a small brass blade on the end.
Logged
Smythe's Accordion Center
Pinole, California
Sales and repairs since 1997

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: Wax heaters
« Reply #14 on: February 12, 2017, 01:22:08 AM »

I have tested two about the same melodeons, wax versus PVA glue.
Not possible to feel difference to me.
What??
Perhaps I have misunderstood your post but please don't tell me you have used PVA glue to attach the reed plates. Argh!!!  :o
Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk

Rog

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2525
  • Repair and tuning in Hants
Re: Wax heaters
« Reply #15 on: February 12, 2017, 03:11:13 PM »

Slightly off topic...but I recently opened an Eastern European small PA and the reeds had been glued in, by the looks of it, by the manufacturer. It was quite a cheap little box though. The glue looked like clear epoxy.

And...like Kimric.. I have made a brass 'knife' and fitted it to temp controlled soldering iron. I find I can scoop a small amount of wax onto the blade and then apply where needed.
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal