Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Adding functions  (Read 1866 times)

0 Members and 1 Guest are viewing this topic.

SandyC

  • Member
  • *
  • Offline Offline
  • Posts: 17
Adding functions
« on: February 10, 2017, 05:15:57 PM »

Is it possible to add bells and whistles, as it were, to a standard box? eg. A stop to take out 3rds (I'm a never can make up my mind sort of person!)
Logged

Andy Next Tune

  • aka Andy Wooles
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1127
  • Melodeon with Accidentals? Make a PI Claim!!!
    • www.shavethedonkey.co.uk
Re: Adding functions
« Reply #1 on: February 10, 2017, 06:03:13 PM »

Yes,  or No.

It depends what your 'standard' box actually is. For example, a bass stop for thirds can be retro-fitted on many boxes e.g. Hohner Pokerwork (speak to Microbot), but I believe is not practical on a Castagnari Lilly.

If you share what your box actually is, then I'm sure one of the local Melnet fettlers will let you know what is possible. Then it just requires money,  of course.
Logged
Andy, from the now ex-County Palatine of Cheshire

Caring for a European community of melodeons from France, Italy, Germany, Wales and Suffolk!

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Adding functions
« Reply #2 on: February 10, 2017, 06:09:52 PM »

It depends on the box, some are straightforward to fit others quite involved.

Many Italian boxes are offered with the option of a stop.  Models like that are fairly easy to fit a stop to later.   They have all the thirds reeds in a row and require just a register slide under the reed block and a knob on the top.

Hohners two rows require much more work.   As standard the thirds are mostly mixed with other reeds.  For example the G/D chord will have one reed plate with B on push (the third of the G chord) and A (fifth of the D chord) on the pull.   Before you can add a stop you have to do a lot of reed work to get all the push pull pairs of thirds onto the same reed plates, and then to get all of those reeds on the same side of the block.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Kimric Smythe

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 712
    • Smythe's Accordion Center
Re: Adding functions
« Reply #3 on: February 10, 2017, 06:14:09 PM »

I have literally added a whistle to an accordion, it was a 12 bass Zon-Rio that had a extra non functioning row of buttons for some reason on the left (they were glued on at the factory). I hooked up three of them to a ;mouth siren, a duck call and a whistle. The whistle and the duck call required two of each and a valve similar to that used on a reed since they only work one way.
Logged
Smythe's Accordion Center
Pinole, California
Sales and repairs since 1997

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Adding functions
« Reply #4 on: February 10, 2017, 07:01:45 PM »

That reminds me I once joined up an accordion with bagpipe bellows.  Not a success.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Grape Ape

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1209
Re: Adding functions
« Reply #5 on: February 10, 2017, 09:20:06 PM »

I have been wanting to ask this same question about adding treble stops and a bass stop to an old honer 3 reed I have.  I seem to remember reading that it had been done, but could 2 stops be added to a treble end?

Who is the guy to go to for such things if possible?
Logged

TomBom

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 471
Re: Adding functions
« Reply #6 on: February 10, 2017, 09:42:41 PM »

I have been wanting to ask this same question about adding treble stops and a bass stop to an old honer 3 reed I have.  I seem to remember reading that it had been done, but could 2 stops be added to a treble end?

Who is the guy to go to for such things if possible?
Scott Bellinger "near" you or Kimric Smythe?
Logged

Kimric Smythe

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 712
    • Smythe's Accordion Center
Re: Adding functions
« Reply #7 on: February 11, 2017, 06:26:47 AM »

I have added stops to the left of a couple of instruments.
 
How difficult depends on how the instrument is set up. some reeds may have to be changed to make this possible as the desired reed to be removed may not occur on the same reed plate in each bellows direction.
Logged
Smythe's Accordion Center
Pinole, California
Sales and repairs since 1997
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal