Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: bellows gasket (draught excluder)  (Read 4089 times)

0 Members and 1 Guest are viewing this topic.

alexalexander

  • Member
  • *
  • Offline Offline
  • Posts: 43
bellows gasket (draught excluder)
« on: February 22, 2017, 12:33:48 PM »

Does anyone know of a supplier of proper bellows gasket tape?  I'm beginnning to get a few draughts around the bellows ends and the pins are trying to escape and  I think my bellows gaskets have reached end of life and need replacing.  I read somewhere that the proper stuff is better than cut down domestic draught excluder - it looks like my gaskets are about 3-4 mm in width.
Logged
D/G Club with Stradella bass (Mengascini), D/G Club with Stradella bass (Castagnari), Hohner Club IIIM D/G, Hohner 2-row D/G pokerwork, Hohner 1-row C, Hohner Club Bb/Eb,  anglo concertina.

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: bellows gasket (draught excluder)
« Reply #1 on: February 22, 2017, 12:50:03 PM »

Does anyone know of a supplier of proper bellows gasket tape?  I'm beginnning to get a few draughts around the bellows ends and the pins are trying to escape and  I think my bellows gaskets have reached end of life and need replacing.  I read somewhere that the proper stuff is better than cut down domestic draught excluder - it looks like my gaskets are about 3-4 mm in width.
The usual answer (I wish people would look at the front page of this forum where it lists repairers and suppliers). We are always having to direct people to:
CGM Musical Services: Charlie Marshall, based in Scotland - he ships worldwide.

This is the page you need.
Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk

alexalexander

  • Member
  • *
  • Offline Offline
  • Posts: 43
Re: bellows gasket (draught excluder)
« Reply #2 on: February 22, 2017, 01:16:16 PM »

thanks for the reply.   I searched the forums for bellows gasket but none of the results pointed me to those pages.
Logged
D/G Club with Stradella bass (Mengascini), D/G Club with Stradella bass (Castagnari), Hohner Club IIIM D/G, Hohner 2-row D/G pokerwork, Hohner 1-row C, Hohner Club Bb/Eb,  anglo concertina.

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: bellows gasket (draught excluder)
« Reply #3 on: February 22, 2017, 01:50:18 PM »

thanks for the reply.   I searched the forums for bellows gasket but none of the results pointed me to those pages.

Use the 'Google Search' facility in the blue menu bar at the head of every page.
Typing in 'bellows gasket' in the search box returned 198 entires within the melnet forum pages.

Edited to add:
The 6th search result came up with a reference to the thread which discussed sourcing bellows gasket from Charlie Marshall.
« Last Edit: February 22, 2017, 01:55:18 PM by Steve_freereeder »
Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk

alexalexander

  • Member
  • *
  • Offline Offline
  • Posts: 43
Re: bellows gasket (draught excluder)
« Reply #4 on: February 22, 2017, 02:13:16 PM »

I retried the search and still only got a handful of results - mostly our discussion.   What I didn't realise is that the search is context sensitive to the page/forum you are viewing.  If I go back out to the front page of the site or the specific forum I get the full set of results.....  Doh.  Sorry about that.
Logged
D/G Club with Stradella bass (Mengascini), D/G Club with Stradella bass (Castagnari), Hohner Club IIIM D/G, Hohner 2-row D/G pokerwork, Hohner 1-row C, Hohner Club Bb/Eb,  anglo concertina.

malcolmbebb

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2628
  • In dampest Dorset, on the soggy south coast.
Re: bellows gasket (draught excluder)
« Reply #5 on: February 22, 2017, 02:15:51 PM »

I retried the search and still only got a handful of results - mostly our discussion.   What I didn't realise is that the search is context sensitive to the page/forum you are viewing.  If I go back out to the front page of the site or the specific forum I get the full set of results.....  Doh.  Sorry about that.

I don't think you're the first to find that. It took me a while. It's quite good when you know.  :||: :||:
Logged
Dino BPII.
"Tradition is not the worship of ashes, but the preservation of fire."

Garry Probert

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 296
Re: bellows gasket (draught excluder)
« Reply #6 on: February 22, 2017, 02:16:53 PM »

Hi
Quote
I read somewhere that the proper stuff is better than cut down domestic draught excluder
One could suggest on vintage instruments leather would be the traditional material,my friends darren has a roll of "bellows gasket" he bought from an accordion shop its neoprene rubber self adhesive strip,

So i bought some neoprene rubber self adhesive strip
off ebay two thickness sizes ,3mm/5mm relatively easy to cut the 10mm width down with a blade and straight edge or scissors and you get double the length

My suggestion when fitting is remove all the old gasket totally,if its leather a childs paint brush dampen not soak ,
when fitting allow slightly loose wrap around corners,and cut at least a 45 angle for the single middle joint ,and i ended up using the 3mm as it really doesn't need a lot of pressure to be airtight 
if you need any help or info just contact
garry 
Logged

alexalexander

  • Member
  • *
  • Offline Offline
  • Posts: 43
Re: bellows gasket (draught excluder)
« Reply #7 on: February 22, 2017, 03:44:07 PM »

thanks for the additional details.  The instrument is my Italian D/G club - it's about 30 years old now, made by Menghini.  The gasket on it is the foam rubber draught excluder type so I'll replace it with that.   
Logged
D/G Club with Stradella bass (Mengascini), D/G Club with Stradella bass (Castagnari), Hohner Club IIIM D/G, Hohner 2-row D/G pokerwork, Hohner 1-row C, Hohner Club Bb/Eb,  anglo concertina.

Graham Spencer

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3548
  • MAD as a wet Hohner........
Re: bellows gasket (draught excluder)
« Reply #8 on: February 22, 2017, 06:47:06 PM »

  The instrument is my Italian D/G club - it's about 30 years old now,

Barely played in yet, then....... :D
Logged
Among others, Saltarelle Pastourelle II D/G; Hohner 4-stop 1-rows in C & G; assorted Hohners; 3-voice German (?) G/C of uncertain parentage; lovely little Hlavacek 1-row Heligonka; Bâ™­/Eâ™­ Koch. Newly acquired G/C Hohner Viktoria. Also Fender Jazz bass, Telecaster, Stratocaster, Epiphone Sheraton, Charvel-Jackson 00-style acoustic guitar, Danelectro 12-string and other stuff..........

Squeezing in the Cyprus sunshine

Henry Piper

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 368
Re: bellows gasket (draught excluder)
« Reply #9 on: February 23, 2017, 11:52:04 AM »

Hi
Quote
I read somewhere that the proper stuff is better than cut down domestic draught excluder
One could suggest on vintage instruments leather would be the traditional material,my friends darren has a roll of "bellows gasket" he bought from an accordion shop its neoprene rubber self adhesive strip,

So i bought some neoprene rubber self adhesive strip
off ebay two thickness sizes ,3mm/5mm relatively easy to cut the 10mm width down with a blade and straight edge or scissors and you get double the length

My suggestion when fitting is remove all the old gasket totally,if its leather a childs paint brush dampen not soak ,
when fitting allow slightly loose wrap around corners,and cut at least a 45 angle for the single middle joint ,and i ended up using the 3mm as it really doesn't need a lot of pressure to be airtight 
if you need any help or info just contact
garry

On the vintage instruments that ive seen, the usual Bellows Gasket material was "Candlewick", a woven cotton material, similar, as its name implies, to the wicks of candles !!!.   Cant say I've ever seen bellows "Gasketed" with Leather,.....But that doesn't mean it was not done of course.
Logged
From Ottery St Mary Devon. Currently Playing Dino Baffetti BP2 in D/G, Hohner Student 1 P.A conversion  in D/G,  Hohner 3515 Pre-Pokerwork in A/D,   2 row "Beaver Brand" in Bb/Eb, Hohner Pre- Erica in G/C .  Single row permanent 4 voice, 4 bass in C from old Hohner single row and bits of a cheap Cajun box !!,

Malcolm Clapp

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1119
  • Loving my Hohner-reeded wet MMM CastaTommy
Re: bellows gasket (draught excluder)
« Reply #10 on: February 23, 2017, 12:20:13 PM »


On the vintage instruments that ive seen, the usual Bellows Gasket material was "Candlewick", a woven cotton material, similar, as its name implies, to the wicks of candles !!!.   Cant say I've ever seen bellows "Gasketed" with Leather,.....But that doesn't mean it was not done of course.


Leather for bellows frame gaskets is quite common on older Italian instruments.
Logged
Tuner/repairer, now retired.

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: bellows gasket (draught excluder)
« Reply #11 on: February 23, 2017, 12:58:31 PM »

And on old Hohners too. Most 1930s Hohners seem to have leather.  I suspect that the candlewick gasket was used mainly on cheaper Saxony boxes, and on Hohners built during periods of wartime and post war shortages.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Garry Probert

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 296
Re: bellows gasket (draught excluder)
« Reply #12 on: February 23, 2017, 01:24:58 PM »

Hi
Quote
On the vintage instruments that ive seen, the usual Bellows Gasket material was "Candlewick", a woven cotton material, similar, as its name implies, to the wicks of candles !!!.   Cant say I've ever seen bellows "Gasketed" with Leather,.....But that doesn't mean it was not done of course.
I only have three melodeons "so far lol"all vintage hohners,darren has three italian and seven "yes" seven lol vintage  hohner's and all were originally leather gasketed,but not the lilly
I,m intrigued "candlewick"woven cotton , was it used on the pallets facing?internal reedblock gaskets?

Sometimes the most bizarre things turn up on vintage instruments.I bought a vintage banjo supposedly been in the loft for over 20 years came in a crate packed with straw and lots of spiders , removing the resonator the original owner had tried to quiet the sound using a cloth mute ,a rather dishevelled pair very large ladies underwear were wrapped in a 30s ? collarless shirt
still have it ,the undies were not salvageable lol
will post a pic   
       
Logged

Henry Piper

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 368
Re: bellows gasket (draught excluder)
« Reply #13 on: February 23, 2017, 04:33:35 PM »

Well thereya Go !!  Ive learnt something new, I thought the Candlewick stuff was the norm on most if not all old boxes !! Delighted to have been corrected.
Gary, I think photos of your Underwear stuffed  Banjo, would be more information than most of us could stand, and probably  unnecessary !!, but on the other hand us melodianists are an eccentric bunch, it might appeal to some,  !!!!!
Logged
From Ottery St Mary Devon. Currently Playing Dino Baffetti BP2 in D/G, Hohner Student 1 P.A conversion  in D/G,  Hohner 3515 Pre-Pokerwork in A/D,   2 row "Beaver Brand" in Bb/Eb, Hohner Pre- Erica in G/C .  Single row permanent 4 voice, 4 bass in C from old Hohner single row and bits of a cheap Cajun box !!,

Graham Spencer

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3548
  • MAD as a wet Hohner........
Re: bellows gasket (draught excluder)
« Reply #14 on: February 23, 2017, 06:08:48 PM »

"30 years old" hardly qualifies as "vintage".  My Saltarelle is older than that (I bought it new), and still its original synthetic self-adhesive gasket.  My guess is that you'd have to go back to the 50s for leather-gasketed bellows, As always, I could be wrong........

Graham
Logged
Among others, Saltarelle Pastourelle II D/G; Hohner 4-stop 1-rows in C & G; assorted Hohners; 3-voice German (?) G/C of uncertain parentage; lovely little Hlavacek 1-row Heligonka; Bâ™­/Eâ™­ Koch. Newly acquired G/C Hohner Viktoria. Also Fender Jazz bass, Telecaster, Stratocaster, Epiphone Sheraton, Charvel-Jackson 00-style acoustic guitar, Danelectro 12-string and other stuff..........

Squeezing in the Cyprus sunshine

tirpous

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1403
Re: bellows gasket (draught excluder)
« Reply #15 on: February 24, 2017, 04:29:54 PM »

Acadian (Marc Savoy) melodeons have leather gaskets.
Logged
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal