Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1] 2   Go Down

Author Topic: Button Mechanism Construction From Scratch  (Read 6609 times)

0 Members and 1 Guest are viewing this topic.

LJC

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 527
Button Mechanism Construction From Scratch
« on: July 15, 2009, 04:16:54 PM »

I read the 'Yet another 1 1/2 row' thread (here http://forum.melodeon.net/index.php/topic,1958.0.html) with interest as I'm just about to start work on my first box from scratch. The woodworking, bellows and reed work doesn't particularly phase me as I've done a lot of this before, but I feel quite unsure of how best to go about constructing the treble and bass arms and rods.

One idea was just to cannibalise an old 1 row I have for the rods, springs and shaped parts to connect the metal to the wood of the case. Another way, I see Charlie at CGM has all the springs I could ever want, but I'm still not sure of the best way to go about building the rest!

Any input (or pictures) would be greatly appreciated!

I intend to keep a picture diary and will keep it updated as the box progresses (I have a pile of wood at the moment...)
Logged

rees

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 5055
  • Windjammer
    • Wesson Accordions
Re: Button Mechanism Construction From Scratch
« Reply #1 on: July 15, 2009, 05:36:03 PM »

What kind of box are you intending to build. One row with two bass or something with more buttons?
Logged
Rees Wesson (accordion builder and mechanic)
Gungrog, Welshpool, Wales, UK
www.melodeons.com

LJC

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 527
Re: Button Mechanism Construction From Scratch
« Reply #2 on: July 15, 2009, 06:07:45 PM »

Sorry should have clarified - at the moment I'm just planning a one row 4 bass and an air button. I'm hoping to move onto some two row boxes so I wanted to try the rod mechanism on the bass end as opposed to spoons or hinged buttons on the two bass boxes.
Logged

Andy in Vermont

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 948
  • Mélodie
    • Melodeon Minutes (blog)
Re: Button Mechanism Construction From Scratch
« Reply #3 on: July 16, 2009, 12:35:13 PM »

Nice thread -- I look forward to the responses and the pics of your box-in-progress.
-Andy

rees

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 5055
  • Windjammer
    • Wesson Accordions
Re: Button Mechanism Construction From Scratch
« Reply #4 on: July 16, 2009, 01:34:07 PM »

Here's a link to the treble action that I use on my one-row melodeons.
http://picasaweb.google.co.uk/reeswesson/WessonClipperTrebleAction?feat=directlink

I use the flapper system for the two basses and air button.
You will need a different system for four basses. (I haven't got that far yet!)
Logged
Rees Wesson (accordion builder and mechanic)
Gungrog, Welshpool, Wales, UK
www.melodeons.com

LJC

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 527
Re: Button Mechanism Construction From Scratch
« Reply #5 on: July 16, 2009, 02:03:11 PM »

That's some good pics! They really do speak more than words. There are some diagrams and pictures on the boxbuilders yahoo group but nothing quite at the right angle. The wooden treble system looks like a safe bet. Did you do anything clever to flatten the wire?

At the moment (for the 4 bass) I'm thinking of getting some thick wire or flat strips and and bending it in a slight S shape, making the ends to accept the button and the other end to accept another piece of wire on the spring and hinge... basically the Hohner system made at home, I don't know if I'm making loads of work for myself - I might just end up with a flappy hinge 2 bass system for convenience sake.

Any recommendations for online shops to buy metal or wood? (I've been to our local wood yard every day this week so far collecting end of the day off cuts!)
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Button Mechanism Construction From Scratch
« Reply #6 on: July 16, 2009, 02:12:09 PM »

More pics here of the mechanism of a Saltarelle I rebuilt a while ago, including building a new bass mechanism.  You could use the same system for a 4 bass, just less of it.  You probably will not need the linkage between pallets which allows reeds to be shared between bass and chord.  There are basically on a small number of components you require

1 straight (to begin with) steel rod
2 T shaped steel rod which gets bent to form the pivoting part
3 pressed steel plate thingy that the pivots operate on
4 button
5 black plastic piston that the button mounts onto
6 pallet

I have a good supply of the straight and T steel rod, and I can get any of the other parts from Italy.  None of them is expensive.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

rees

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 5055
  • Windjammer
    • Wesson Accordions
Re: Button Mechanism Construction From Scratch
« Reply #7 on: July 16, 2009, 11:05:23 PM »

That's some good pics! They really do speak more than words. There are some diagrams and pictures on the boxbuilders yahoo group but nothing quite at the right angle. The wooden treble system looks like a safe bet. Did you do anything clever to flatten the wire?

At the moment (for the 4 bass) I'm thinking of getting some thick wire or flat strips and and bending it in a slight S shape, making the ends to accept the button and the other end to accept another piece of wire on the spring and hinge... basically the Hohner system made at home, I don't know if I'm making loads of work for myself - I might just end up with a flappy hinge 2 bass system for convenience sake.

Any recommendations for online shops to buy metal or wood? (I've been to our local wood yard every day this week so far collecting end of the day off cuts!)

Offcuts are good, you can make a melodeon out of anything.

I was lucky with the flattened ends. I found a little man with a huge hydraulic press in a dingy basement in Castelfidardo. His name was Luigi and he made me 170 steel levers in 15 minutes for the princely sum of 4 euros! I'm running short of these levers so will either have to visit my local engineering works who will charge a lot more than 4 euros or nip over and find Luigi again.
Logged
Rees Wesson (accordion builder and mechanic)
Gungrog, Welshpool, Wales, UK
www.melodeons.com

emrock

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 126
  • Busker, based in Southern Germany
Re: Button Mechanism Construction From Scratch
« Reply #8 on: August 27, 2009, 01:40:04 PM »

In the process of building a 2 row myself. So far only made progress on the treble side, pictures to follow soon! But for the treble action I wanted to do something original (not copy too much pre existing boxes) and after much head scratching have decided that the easiest way for me will be to attach extension springs to the rod which the pallet is on and then to a rod parallel to the axle. This will mean with the grill off the springs will be very visible, and not very pretty but this should work. Any suggestions as to how I could improve it?
Logged

LJC

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 527
Re: Button Mechanism Construction From Scratch
« Reply #9 on: August 27, 2009, 08:57:30 PM »

Do you mean that the springs would be attached to the outside of the sound board underneath the air holes? I don't think this is such a good idea as it will probably result in a sloppy feeling action and the springs would have to be very small so that they did not stop the arm closing the pallet on the return (unless the arms were bent in such a way to avoid this).

Whats wrong with the traditional one row system where the springs are behind the fingerboard? I see that you say that you want to do something original, but if there was a better way I'm absolutely sure some maker would have adopted it and it would be doing the rounds?

I'm using an upside down T bar with a one end holding the button, one as the pivot and the longer part of the T making the pallet arm. Tension from a torsion spring (I think that is the correct engineers term for the o spring with two arms that are so common in boxes). Felt squares under the buttons to reduce clack and limit travel.
Logged

emrock

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 126
  • Busker, based in Southern Germany
Re: Button Mechanism Construction From Scratch
« Reply #10 on: August 27, 2009, 09:09:19 PM »

I don't think this is such a good idea as it will probably result in a sloppy feeling action and the springs would have to be very small so that they did not stop the arm closing the pallet on the return (unless the arms were bent in such a way to avoid this).

I'm not quite sure what you mean. But I do feel this is not the best solution. I think I will have to play around and see what works, my main reason for moving the springs is easy access and a lack of significant room under the keyboard, though I had originally intended to use the same method as a 1 row or italian open keyboard 2 row for that matter.
Logged

rees

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 5055
  • Windjammer
    • Wesson Accordions
Re: Button Mechanism Construction From Scratch
« Reply #11 on: August 27, 2009, 09:34:38 PM »

This is the method I use. It is by far the easiest to manufacture.
Standard in all Cajun boxes and also Eric Martin 2 row.

http://picasaweb.google.co.uk/lh/photo/bQMa1WMbqCl2bFN3FkTz5w?feat=directlink

and here

http://picasaweb.google.co.uk/lh/photo/slM9NvbG6B9993CLD4r6fg?feat=directlink
Logged
Rees Wesson (accordion builder and mechanic)
Gungrog, Welshpool, Wales, UK
www.melodeons.com

emrock

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 126
  • Busker, based in Southern Germany
Re: Button Mechanism Construction From Scratch
« Reply #12 on: August 27, 2009, 09:43:01 PM »

thanks rees that does look easier, but will have a play around with my keyboard and see what I can do. I suppose there's no need to reinvent the wheel.
Logged

TomB-R

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 598
Re: Button Mechanism Construction From Scratch
« Reply #13 on: August 27, 2009, 11:47:55 PM »

I used side springs.  Easy individual access and removal/replacement without detaching the keyboard and action.
Also means the springs are very easy to bend up from wire. Downside, only works with a "button plate."

(What's the correct name for a cover over the action with holes for the buttons?)

I'll aim to post a pic shortly.
Tom
Logged

Hywel

  • Member
  • *
  • Offline Offline
  • Posts: 10
Re: Button Mechanism Construction From Scratch
« Reply #14 on: August 29, 2009, 02:43:49 PM »

Here's a link to the treble action that I use on my one-row melodeons.
http://picasaweb.google.co.uk/reeswesson/WessonClipperTrebleAction?feat=directlink


Rees - what are you using to cut the slots for the keys - they look really sharp and evenly spaced.  Since I'm trying to avoid machine tools as far as possible, I've been experimenting with a Silky 'Gomtaro' handsaw, which is incredibly sharp and accurately ground, and various jigs to get the spacing accurate and repeatable, but I'm not quite there yet!  I'm beginning to suspect that the keyboard slots might be best done with a table saw or something similar.
Logged

Falseknight

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 449
    • False Knight
Re: Button Mechanism Construction From Scratch
« Reply #15 on: August 31, 2009, 08:38:19 PM »

What is wrong with machine tools?
Logged

Andy Simpson

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 938
Re: Button Mechanism Construction From Scratch
« Reply #16 on: August 31, 2009, 09:47:13 PM »

Since I'm trying to avoid machine tools as far as possible, I've been experimenting with a Silky 'Gomtaro' handsaw, which is incredibly sharp and accurately ground, and various jigs to get the spacing accurate and repeatable, but I'm not quite there yet!

If you want accurate and repeatable results with a minimum of effort then machine tools are the way to go, boxes are a product of the industrial age and are best suited to modern methods of production. If you want clean sharp edges by hand then do it the old-fashioned way, those beautiful dovetails on fine regency furniture didn't come straight off the saw.
Logged

rees

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 5055
  • Windjammer
    • Wesson Accordions
Re: Button Mechanism Construction From Scratch
« Reply #17 on: September 01, 2009, 01:25:49 AM »

On the melodeon course, Emmanual Pariselle cuts them on a table saw using a very expensive looking jig.
I am currently cutting mine on the bandsaw using a not so expensive jig. I cut each side of the slot and then chisel out the middle.
Talking to Martyn Banks of Oakwood recently. He uses a router. If I can sort the jig out I shall probably use a router from now on.
Logged
Rees Wesson (accordion builder and mechanic)
Gungrog, Welshpool, Wales, UK
www.melodeons.com

pete /acorn

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 930
  • .Cast Trilly
    • Acorn Instruments
Re: Button Mechanism Construction From Scratch
« Reply #18 on: September 01, 2009, 08:05:04 AM »

Hi,
If using a router purchase a router table then the machine is held firmly and you just move the wood and you also keep fingers well away from cutter,the best machine is an overheah router,small ones come up on ebay however which ever one you use please buy how to use book or video,THESE MACHINES BITE,it is never machine fault,always opperator error.
This observation from experience.

if advise on jigs wanted contact me.

Pete
Logged
Acorn Instruments are specialist retailers of Castagnari Instruments,and have an extensive stock of new instruments on the shelf for prompt delivery in standard layouts however these can easily be changed to customers special requirements,we have over 600 reeds in stock
 We also have the largest stock in the UK of  pre loved melodons all fully serviced,and with 12 months warranty
UK and international customers catered for
www.acorninstruments.co.uk

Hywel

  • Member
  • *
  • Offline Offline
  • Posts: 10
Re: Button Mechanism Construction From Scratch
« Reply #19 on: September 01, 2009, 10:47:05 AM »

What is wrong with machine tools?
Nothing - except I don't have any, now I'm not working in engineering.  I'm also enjoying rediscovering working with hand tools, especially some of the simplest ones (like cabinet scrapers) - and I don't have to make a living at it, in which case it would be machine tools every time.
Logged
Pages: [1] 2   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal