Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: 1 [2]   Go Down

Author Topic: Button Mechanism Construction From Scratch  (Read 6622 times)

0 Members and 1 Guest are viewing this topic.

emrock

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 126
  • Busker, based in Southern Germany
Re: Button Mechanism Construction From Scratch
« Reply #20 on: September 01, 2009, 11:01:30 AM »

I'm using hand tools as well. I had originally intended to buy cheap electric tools, but I have no space or money for the likes of table saws, band saw, routers etc. So so far I have used a tenor saw to cut the grooves in my keyboard, apart from that I have just used a coping saw, a hand drill and various plains and chisels. And this has worked fine (although being more time consuming)

Logged

melodeon

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1732
Re: Button Mechanism Construction From Scratch
« Reply #21 on: September 01, 2009, 03:00:43 PM »

A router on cross-grain is a formula for failure unless you have a "closed" comb.. referring here to the fingerboard and the slots for the fulcrum levers
It would work better with  scoring the lines to prevent chip out.

A pin or overhead router is a good tool in some cases

As to the router table and operator error:  in 1993 I was using such a machine with a jig.  The jig broke and my right hand went into a large spinning bit.
I'll save you the details but after some surgeries I manged to have my thumb, index and middle finger ( in 4 pieces) on my right hand  reattached.
A year's therapy and several years later, they function. This is also the reason I switched from guitar and mandolin and banjo to button accordeons. I still play stringed instruments but I am not the professional player I wasn't going to be.

A simple jig and a modest table saw with a decent blade is another way to cut these slots, presuming and "open" comb.

For hand saws.. a Japanese pull saw with 20 plus teeth per inch is very effective and relatively cheap.  I use the type with replaceable blades. 

Logged

rees

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 5055
  • Windjammer
    • Wesson Accordions
Re: Button Mechanism Construction From Scratch
« Reply #22 on: September 01, 2009, 04:35:50 PM »

I can endorse the Japanese pull saw with replaceable blade. It's the cheapest and best tool in my workshop.
Logged
Rees Wesson (accordion builder and mechanic)
Gungrog, Welshpool, Wales, UK
www.melodeons.com

Andy Simpson

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 938
Re: Button Mechanism Construction From Scratch
« Reply #23 on: September 01, 2009, 07:46:14 PM »

Yes, Japanese saws are bloody marvellous, I have three of them and use them all the time for everything. They're so good I've never felt the need to get a bandsaw or tablesaw, once the blades have had it they make great cabinet scraper material too.
Logged
Pages: 1 [2]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal