Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1] 2   Go Down

Author Topic: Getting pallets airtight on a one row 4 stopper?  (Read 4076 times)

0 Members and 1 Guest are viewing this topic.

TomBom

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 471
Getting pallets airtight on a one row 4 stopper?
« on: March 25, 2017, 02:00:22 PM »

My box was perfectly airtight - until I decided to soften the spring tension  >:E .
On a Hohner single row I'd simply remove the pallets, reglue them and they should lie perfectly flat on the soundboard.
On cajun style boxes - how do you manage to get them flat?
« Last Edit: March 25, 2017, 05:56:37 PM by TomBom »
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Getting pallets airtight on a one row 4 stopper?
« Reply #1 on: March 25, 2017, 05:16:59 PM »

If all you have done is to adjust the springs then the pallets should still be lying flat.  You may have gone too far is softening the springs.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

tirpous

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1403
Re: Getting pallets airtight on a one row 4 stopper?
« Reply #2 on: March 25, 2017, 06:13:11 PM »

Or could it be that the springs were strong enough to flatten ill-fitting pallets before, but not anymore ??
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Getting pallets airtight on a one row 4 stopper?
« Reply #3 on: March 25, 2017, 06:23:00 PM »

That's possible.   Also possible is that in handling the keyboard some of the pallet levers have bee pushed out of alignment.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

boxcall

  • You got to love it!!!
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1801
Re: Getting pallets airtight on a one row 4 stopper?
« Reply #4 on: March 25, 2017, 07:58:03 PM »

Could I ask how you soften the springs?
These are not under the keyboard coil type, but inside the keyboard under the levers spring type? Right


Logged
Hohner 1040 C, Beltuna one row four stop D, O'Byrne Dewitt/ Baldoni bros. D/C#, Paolo soprani "pepperpot" one row D

TomBom

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 471
Re: Getting pallets airtight on a one row 4 stopper?
« Reply #5 on: March 25, 2017, 08:37:04 PM »

Well at least some pallets didn't lie flat now. And I soften the springs by bending the loose end towards the button end. I kind of measured how tight the springs are: about 190 g put the buttons down. I reduced this to ca. 150 g.
Logged

tirpous

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1403
Re: Getting pallets airtight on a one row 4 stopper?
« Reply #6 on: March 25, 2017, 09:36:11 PM »

Quote
about 190 g put the buttons down. I reduced this to ca. 150 g.

Ah, the scientific approach!  ;D

To answer your original question (On cajun style boxes - how do you manage to get them flat?), I think it's a matter of carefully and judiciously bending the rods connecting pallets and keys.

Logged

Rog

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2525
  • Repair and tuning in Hants
Re: Getting pallets airtight on a one row 4 stopper?
« Reply #7 on: March 26, 2017, 08:03:23 AM »

From the looks of the photo the pallet leather/felt is quite thick, which should give the pallet setting a bit of 'float' enabling it to sit flat over the holes. Best guess is you upset the vertical alignment. If I was trying to fix this (and 'fixed' pallets are a right pain to be honest) I'd first try and track down the leaky pallet...I.e. Diagnose the problem first. If they all leak then your theory about reducing the pressure too much might be true. Another approach may be to replace the pallet felt/leather because the original ones will have an impression of the holes and any slight move will make them leak. But first use a brass wire brush on the leather pallet facing to rough them up and allow them to form a new seal, then see if they still leak. If you could hold it up to a very bright light that is also a good way to see which pallets leak. But you have to be able to take out the reed blocks and you probably can't do that on a Cajun box.

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: Getting pallets airtight on a one row 4 stopper?
« Reply #8 on: March 26, 2017, 09:21:18 AM »

I agree with Roger - diagnose the problem first.
The location and extent of leaky pallets can be best found by using a 'Rizla'-type cigarette paper: cut a narrow tapering strip the length of the paper and about 5 mm wide at the narrow end and about 10 mm wide at the other end.

Use this as a feeler gauge by inserting the strip underneath the pallet and letting the spring tension 'grab' the paper. Try pulling the strip out and get a feel for the amount of grab. If there is any leak the strip will come out easily or not be held at all. Repeat the test in different places around the pallet and do the same on every pallet. This should enable you to accurately locate problem leaky places.

It's not really possible to recommend a solution until you have determined the cause/location of the leaks.
Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Getting pallets airtight on a one row 4 stopper?
« Reply #9 on: March 26, 2017, 09:31:32 AM »

Another way to pinpoint the leaks is to sprinkle powders talc around the edges of the pallets, then gently press the bellows while watching where the talc moves.  Best to do only a couple of pallets at a time as they powder quickly gets moved away.  It's messy but works.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

TomBom

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 471
Re: Getting pallets airtight on a one row 4 stopper?
« Reply #10 on: March 26, 2017, 10:57:14 AM »

Wow, thanks for your suggestions so far! It's possible to take out the reed blocks.
I'll start to identify the leaky pallets first.
« Last Edit: March 27, 2017, 01:56:29 PM by TomBom »
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Getting pallets airtight on a one row 4 stopper?
« Reply #11 on: March 26, 2017, 11:27:51 AM »

If you can take out the reed blocks there is another method for testing the pallets by blowing from the inside of the box with this device from concertina builderBob Tedrow
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Rog

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2525
  • Repair and tuning in Hants
Re: Getting pallets airtight on a one row 4 stopper?
« Reply #12 on: March 26, 2017, 11:35:19 AM »

I like that blowing device (:). If you can take out the reeds that is good, because they are distraction. The best bright light I know is the sun, and I tracked down many a leak with this method.

playandteach

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3526
  • Currently a music teacher in a high school.
Re: Getting pallets airtight on a one row 4 stopper?
« Reply #13 on: March 26, 2017, 11:51:11 AM »

Just an add on to Steve's cigarette paper test - avoid using the gummed edge as that will grip giving a false positive.
Logged
Serafini R2D2 GC, Serafini GC accs 18 bass

tirpous

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1403
Re: Getting pallets airtight on a one row 4 stopper?
« Reply #14 on: March 26, 2017, 04:42:01 PM »

Obvious maybe, but a visual inspection can also help.  Sometimes the pallets are misaligned and barely cover the holes.  Or when closing, one end or side of the pallet touches before the other.
Logged

boxcall

  • You got to love it!!!
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1801
Re: Getting pallets airtight on a one row 4 stopper?
« Reply #15 on: March 26, 2017, 05:02:12 PM »

Assuming everything is straight and sitting flat to keyboard, doesn't there need to be enough pressure on pallet from spring to fight the air pushing against it?
I think Theo had it right, with you went to far.
Logged
Hohner 1040 C, Beltuna one row four stop D, O'Byrne Dewitt/ Baldoni bros. D/C#, Paolo soprani "pepperpot" one row D

Kimric Smythe

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 712
    • Smythe's Accordion Center
Re: Getting pallets airtight on a one row 4 stopper?
« Reply #16 on: March 26, 2017, 05:21:50 PM »

We use a stethoscope that has had the metal end cut off and replaced with a 1/8 metal tube. You squeeze the accordion and pass the tip of the tube around the possible leak areas.

You will readily hear air blowing over the end of the tube and you can pinpoint leaks.
Logged
Smythe's Accordion Center
Pinole, California
Sales and repairs since 1997

blafleur

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 530
Re: Getting pallets airtight on a one row 4 stopper?
« Reply #17 on: March 26, 2017, 05:22:58 PM »

If you can remove the reed blocks, you can use what I use on new accordions.  I get them airtight before installing reed blocks by shining a strong light from inside.  You'll clearly see where the leaks are. 

Pearse Rossa

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 723
Re: Getting pallets airtight on a one row 4 stopper?
« Reply #18 on: March 26, 2017, 05:49:44 PM »

I kind of measured how tight the springs are: about 190 g put the buttons down. I reduced this to ca. 150 g.

What device did you use to make that measurement?
Logged

TomBom

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 471
Re: Getting pallets airtight on a one row 4 stopper?
« Reply #19 on: March 26, 2017, 07:18:33 PM »

Some pallets are misaligned - I can feel air pouring out. I'll try to identify which one and where by using bright light.

BTW my device for measuring is the most provisional I can think of:
plastic bottle with just enough water in it to move the button  ;D
Logged
Pages: [1] 2   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal