Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Vinyl/Vileda valve installation  (Read 1392 times)

0 Members and 1 Guest are viewing this topic.

Barry Tolson

  • Good talker
  • **
  • Offline Offline
  • Posts: 65
Vinyl/Vileda valve installation
« on: April 07, 2017, 12:36:27 AM »

I am about to try installing vinyl reed valves for the first time. So far, I have only worked with leather...and am a little confused by these vinyl/vileda valves that I got from CGM
The bass valves appear to be 3 layers. 1 layer is leather and there are 2 more layers of some sort of plastic.  The smaller valves are 2 layers...one short/black, the other longer opaque/yellow. 
Can someone give be a very brief explanation of proper installation? Are all these layers always left intact? Which side goes up/down when installing the smaller valves? Can I use shellac to adhere these valves, as I do with leather?  Thanks.
Logged
Hohner Club IIB Victoria

boxcall

  • You got to love it!!!
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1801
Re: Vinyl/Vileda valve installation
« Reply #1 on: April 07, 2017, 01:21:02 AM »

Hi Barry,
Yes all layers stay together and short length faces up and or leather side down on reed plate, and you will see how the rest will go.
Contact cement I believe works for adherence to plate, only small amount needed. I'm not sure about shellac? Probably would work.
Cgm sells glue made just for the job. Most folks dab a little on the valve then place valve onto plate.
Good luck
Logged
Hohner 1040 C, Beltuna one row four stop D, O'Byrne Dewitt/ Baldoni bros. D/C#, Paolo soprani "pepperpot" one row D

Jake Middleton (brinwins)

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 102
  • Concertina Maker and repairer
    • Wolverton Concertinas
Re: Vinyl/Vileda valve installation
« Reply #2 on: April 08, 2017, 10:38:57 AM »

I have always used "uhu" all purpose adhesive. It is a contact adhesive and works well for the job. I got the idea from a video I saw about servicing accordions years ago, never had any trouble from it.

Pete Dunk

  • Typo Expert
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3706
Re: Vinyl/Vileda valve installation
« Reply #3 on: April 08, 2017, 01:20:27 PM »

A picture paints a thousand words, well twenty at least. Another vote for using a dab of contact cement like Uhu or Bostik, impact adhesive like Evo-Stik works well too. The shorter lengths of thicker material act like a spring to support the thin main valve and stop it flapping around whilst still maintaining a fast response to the slightest bellows movement.

Logged
Squeezing on the Isle of Oxney, UK
Primo (Serenellini) D/G
Isis D/G
Hohner B/E, G/C, C/F, Bb/Eb G/C/F
Liliputs D/G (G scale), C/F, Bb/Eb, Albrecht Custom D/G (G scale)

playandteach

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3526
  • Currently a music teacher in a high school.
Re: Vinyl/Vileda valve installation
« Reply #4 on: April 08, 2017, 07:48:01 PM »

This is something I need to get round to doing sometime on the Hohner Student. Do you trim the outer layers of the valves before fixing them, or glue first, then gradually trim bits off until the response is right?
Logged
Serafini R2D2 GC, Serafini GC accs 18 bass

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Vinyl/Vileda valve installation
« Reply #5 on: April 08, 2017, 08:52:52 PM »

Trim the lowest layer to within a mm or so of the vent.  Only usually need to trim the upper layers if you have shortened the lower layer until it's close to the second.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal