Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Pimp my Streb: Bass Strap  (Read 1344 times)

0 Members and 1 Guest are viewing this topic.

Steve C.

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2075
  • Erica, Morse Anglo
Pimp my Streb: Bass Strap
« on: April 08, 2017, 08:59:44 PM »

Nice as the Streb is, cries out for adjustable bass strap.  And a very nice one, with hardware, from Charlie Marshall.  Just got around to putting it on today.  Easy mod, following Steve's instructions.  So easy a caveman can do it.
The fly in the ointment, as Steve points out, is now the feet are too short.
So, next, needs some hardwood bushings to raise 'em up.
« Last Edit: April 08, 2017, 09:01:27 PM by Steve C. »
Logged
Located in Central North Carolina, USA; credit for picture: livingplanet.ca

playandteach

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3526
  • Currently a music teacher in a high school.
Re: Pimp my Streb: Bass Strap
« Reply #1 on: April 09, 2017, 10:21:45 AM »

What I did was to use hardwood drawer handles, drilled through, as feet for my Serafini - which arrived with an adjustable strap and short feet.
You might find that you'll need longer screws if you add bushes - with the hardwood handles you can drill through with a narrow bit for the shaft of the screw, and use a wider bit to countersink the screw head to the right depth. Sorry if this is teaching you to suck eggs.
Logged
Serafini R2D2 GC, Serafini GC accs 18 bass

malcolmbebb

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2628
  • In dampest Dorset, on the soggy south coast.
Re: Pimp my Streb: Bass Strap
« Reply #2 on: April 09, 2017, 10:24:40 AM »

For those purchasing a Streb, I believe Steve will fit one for you. Definite improvement.
Logged
Dino BPII.
"Tradition is not the worship of ashes, but the preservation of fire."

Steve C.

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2075
  • Erica, Morse Anglo
Re: Pimp my Streb: Bass Strap
« Reply #3 on: April 09, 2017, 01:46:40 PM »

Steves note:  "Regarding new bass strap, yes you will be fine fitting with new holes as long as you keep the holes at least 1.9cm in from the front edge of the casework and don't use screws with a threaded shaft longer than 1/4". Drill 1.5mm pilot holes and don't let the drill go in deeper than the wood by any significant amount. This is so that any excess length of screw or pilot drill does not foul the air button mechanism or loudspeaker. You will already know about all this if you have removed the bass front plate to adjust the air bypass.  I like Charlie's velcro bass straps but I have found that they are thicker than the depth of the rubber feet I use and the instrument sits on the strap and rocks rather unnervingly. Make sure it doesn't fall over if you put it on the floor in a session! I would use them myself but I cannot find any longer feet of similar diameter. Maybe I could shim the feet with wooden discs, hmmm...."

Note to Wally:  I originally thought to get the 016-1 strap from Charlie, but he said the 016-2 was the better size.  Also get the 045A end plates with screws to finish it off.  Using the 016-2, I did need to give it a little haircut, did it in two stages, figured, always take more off, cannot put it back. 

Now to the feet.  P&T idea interesting.  But I do like Steve's rubber feet, so might try using ⅝" hardwood dowel to make bushings and use #4 x 1" screws, which should go into the casework about the same as current screws.
Logged
Located in Central North Carolina, USA; credit for picture: livingplanet.ca

NickF

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 177
Re: Pimp my Streb: Bass Strap
« Reply #4 on: April 10, 2017, 07:32:55 AM »

For those purchasing a Streb, I believe Steve will fit one for you. Definite improvement.
When I got mine, I asked Steve to do this very thing, he is very accommodating and a great person to deal with  (:)

As Malcolm says, it's a big improvement  ;D
Logged
Serenellini 233, Streb, D/G Pokerwork, D/G Liliput, Bb/Eb Liliput, Bb/Eb Comedy Wardrobe (Hohner Model X), Bb/Eb Accidental Erika

If you can smile when things are going wrong, you must have someone else in mind to blame

Steve C.

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2075
  • Erica, Morse Anglo
Re: Pimp my Streb: Bass Strap
« Reply #5 on: April 11, 2017, 03:37:12 PM »

Added 9mm bushings made from ⅝" hardwood dowel stained cherry.  Will replace when I can get some cherry dowel or maybe some other foot mod that maybe Steve comes up with.  Nice and steady. 
Won't take a lot of torsional/oblique abuse, as it's standing up kinda high now. 
Saw some nice longer rubber feet on eBay buy they are quite a bit wider and won't fit using the existing holes in casework.
Logged
Located in Central North Carolina, USA; credit for picture: livingplanet.ca
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal