Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1] 2 3   Go Down

Author Topic: How to polish celluloid  (Read 12207 times)

0 Members and 1 Guest are viewing this topic.

Rog

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2525
  • Repair and tuning in Hants
How to polish celluloid
« on: April 09, 2017, 07:42:10 AM »

I've had a look through the threads....but still have this question.
Once a celluloid repair has been made e.g. Patching a thumbnail sized hole on a corner of a Corona, the celluloid can be evened out with glass paper. But what is the technique for getting a glassy smooth surface?  How do you convert a matt finish to a polished finish?

Nick Collis Bird

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3785
  • Been squeezing melodeons for over 48 years (badly)
Re: How to polish celluloid
« Reply #1 on: April 09, 2017, 07:49:05 AM »

There are more experts here than me Rog
But I would try jewellers rouge with a Dremel buffing pad. Now come on! You have got a Dremel,haven't you?   >:E
Logged
Has anyone heard of the song. “ Broken Alarm-clock Blues” ? It starts   â€œI woke up this Afternoon”

pete /acorn

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 930
  • .Cast Trilly
    • Acorn Instruments
Re: How to polish celluloid
« Reply #2 on: April 09, 2017, 07:55:50 AM »

Hi Roger,

Firstly,dont use glass or sandpaper,use very fine wet and dry on a cork block to level ,use circular motion and very gently.
If on a corner fold paper three times to make thicker and hold rather than on block

Then use fercell G3 then G10 to finish.,

Pete
Logged
Acorn Instruments are specialist retailers of Castagnari Instruments,and have an extensive stock of new instruments on the shelf for prompt delivery in standard layouts however these can easily be changed to customers special requirements,we have over 600 reeds in stock
 We also have the largest stock in the UK of  pre loved melodons all fully serviced,and with 12 months warranty
UK and international customers catered for
www.acorninstruments.co.uk

Rog

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2525
  • Repair and tuning in Hants
Re: How to polish celluloid
« Reply #3 on: April 09, 2017, 08:04:35 AM »

Hi both, thanks. Yes I have a Dremel and buffing compound. Just thought I'd ask. I have a busted Corona end to practice on (:) before I repair the replacement.

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: How to polish celluloid
« Reply #4 on: April 09, 2017, 08:12:42 AM »

Hi both, thanks. Yes I have a Dremel and buffing compound. Just thought I'd ask. I have a busted Corona end to practice on (:) before I repair the replacement.

Very easy to good too fast with a Dremel and burn the celluloid

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: How to polish celluloid
« Reply #5 on: April 09, 2017, 08:24:25 AM »

Brasso or other metal polish works well. Apply by hand on a soft cloth.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

John MacKenzie (Cugiok)

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2360
  • Fettling... Learning to reed and right.
Re: How to polish celluloid
« Reply #6 on: April 09, 2017, 08:47:05 AM »

Yes I agree with Theo, Brasso is the best way to get a good finish on plastics of all sorts. I have also had good results with a red powder which was what we used to polish spectacle lenses many years ago, when I worked in that trade. The trade name was Serirouge, or Cerirouge, but I assume it's a variation of jeweler's rouge. The best thing I have found for a final polish, is Mer polish.
Hand polishing works best, power tools are too fast, and over enthusiastic use, can melt the surface of most plastics.


Sir John
Logged
There is no beginning to my talent :)



: Hohner Club Modell 1. Bb/Eb, de-clubbed : Early Hohner Pressed Wood A/D : 1930's Varnished wood G/C:  Hohner Erika C/F: Bandoneon tuned D/G Pressed wood: Koch F/Bb; G/C Pre Corso

Nick Collis Bird

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3785
  • Been squeezing melodeons for over 48 years (badly)
Re: How to polish celluloid
« Reply #7 on: April 09, 2017, 08:52:18 AM »

Hi both, thanks. Yes I have a Dremel and buffing compound. Just thought I'd ask. I have a busted Corona end to practice on (:) before I repair the replacement.

Very easy to good too fast with a Dremel and burn the celluloid

Hmmm!  I use a Dremel to polish Abalone and other shells to a really high finish. It depends on how hard you push. You would have to be very heavy handed to spoil celluloid.
Logged
Has anyone heard of the song. “ Broken Alarm-clock Blues” ? It starts   â€œI woke up this Afternoon”

Rog

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2525
  • Repair and tuning in Hants
Re: How to polish celluloid
« Reply #8 on: April 09, 2017, 08:53:09 AM »

Does Brasso contain a v fine abrasive? I use stuff called Safe Cut, which is a less aggressive version of T Cut, when cleaning up boxes. But in the case of matt celluloid it needs to bring up a shine. I'll give Brasso a go too.

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: How to polish celluloid
« Reply #9 on: April 09, 2017, 09:07:51 AM »


Very easy to good too fast with a Dremel and burn the celluloid
[/quote]

Hmmm!  I use a Dremel to polish Abalone and other shells to a really high finish. It depends on how hard you push. You would have to be very heavy handed to spoil celluloid.
[/quote]

You only have to be slightly heavy handed to damage celluloid using a powered buffing mop.  It softens with only a slight increase in temperature, then the buff starts to catch the softened surface and very quickly you have a ploughed field!
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Rog

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2525
  • Repair and tuning in Hants
Re: How to polish celluloid
« Reply #10 on: April 09, 2017, 09:24:34 AM »

That sounds like the voice of experience. Thanks Theo. I now have this image of you happily buffing some celluloid with a drill mop and suddenly 'oh <expletive>'...

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: How to polish celluloid
« Reply #11 on: April 09, 2017, 09:49:14 AM »

That's about it. Nothing quite like learning from mistakes.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: How to polish celluloid
« Reply #12 on: April 09, 2017, 10:22:14 AM »

That's about it. Nothing quite like learning from mistakes.

Learning from other's mistakes is better though  (:)

Nick Collis Bird

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3785
  • Been squeezing melodeons for over 48 years (badly)
Re: How to polish celluloid
« Reply #13 on: April 09, 2017, 11:22:35 AM »

 ;D
Logged
Has anyone heard of the song. “ Broken Alarm-clock Blues” ? It starts   â€œI woke up this Afternoon”

Rog

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2525
  • Repair and tuning in Hants
Re: How to polish celluloid
« Reply #14 on: April 09, 2017, 11:37:42 AM »

Hi Roger,

Firstly,dont use glass or sandpaper,use very fine wet and dry on a cork block to level ,use circular motion and very gently.
If on a corner fold paper three times to make thicker and hold rather than on block

Then use fercell G3 then G10 to finish.,

Pete

Pete...what is the fercell stuff you mention?

malcolmbebb

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2628
  • In dampest Dorset, on the soggy south coast.
Re: How to polish celluloid
« Reply #15 on: April 09, 2017, 11:46:47 AM »

Logged
Dino BPII.
"Tradition is not the worship of ashes, but the preservation of fire."

pete /acorn

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 930
  • .Cast Trilly
    • Acorn Instruments
Re: How to polish celluloid
« Reply #16 on: April 09, 2017, 12:37:29 PM »

That's the stuff,

I them finish with autoglym  car polish because it has a very slight abrasive action
Logged
Acorn Instruments are specialist retailers of Castagnari Instruments,and have an extensive stock of new instruments on the shelf for prompt delivery in standard layouts however these can easily be changed to customers special requirements,we have over 600 reeds in stock
 We also have the largest stock in the UK of  pre loved melodons all fully serviced,and with 12 months warranty
UK and international customers catered for
www.acorninstruments.co.uk

diatonix

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 622
Re: How to polish celluloid
« Reply #17 on: April 09, 2017, 01:45:27 PM »

Tooth paste works quite well too!
Logged

John MacKenzie (Cugiok)

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2360
  • Fettling... Learning to reed and right.
Re: How to polish celluloid
« Reply #18 on: April 09, 2017, 02:59:57 PM »

That's what I use on my windscreen, to clear oily greasy film. It works well.


Sir John
Logged
There is no beginning to my talent :)



: Hohner Club Modell 1. Bb/Eb, de-clubbed : Early Hohner Pressed Wood A/D : 1930's Varnished wood G/C:  Hohner Erika C/F: Bandoneon tuned D/G Pressed wood: Koch F/Bb; G/C Pre Corso

Nick Collis Bird

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3785
  • Been squeezing melodeons for over 48 years (badly)
Re: How to polish celluloid
« Reply #19 on: April 09, 2017, 03:36:27 PM »

Tooth powder also. Preferably smokers, but you won't get the high polish that brasso gives.
« Last Edit: April 09, 2017, 03:38:43 PM by Nick Collis Bird »
Logged
Has anyone heard of the song. “ Broken Alarm-clock Blues” ? It starts   â€œI woke up this Afternoon”
Pages: [1] 2 3   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal