Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: 1 [2] 3   Go Down

Author Topic: How to polish celluloid  (Read 12190 times)

0 Members and 1 Guest are viewing this topic.

Kimric Smythe

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 712
    • Smythe's Accordion Center
Re: How to polish celluloid
« Reply #20 on: April 17, 2017, 07:31:07 AM »

I use the same stuff car people use to polish paint. There are large ,fine and haze removing compounds that I use in the shop all the time. These can be found at any car parts shop. The final polish compound works great on aluminum trim too.
Logged
Smythe's Accordion Center
Pinole, California
Sales and repairs since 1997

tom f

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 112
Re: How to polish celluloid
« Reply #21 on: April 17, 2017, 10:36:55 AM »

I've used T Cut with good effect on celluloid and keep polishing until the cloth shows no more dirt.  A coat of Canuba wax on top makes a good finish.  Go gently over transfers.  I've found that a gentle wipe over improves the look of those too. 
Logged

Psuggmog Volbenz

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 318
    • musical whimsy
Re: How to polish celluloid
« Reply #22 on: April 18, 2017, 05:09:33 AM »

There are compounds formulated to remove oxidation from vinyl boat windows which I have used successfully. Rubbing compound is one name for the material used to polish automotive lacquer. Cerium oxide is another option which I use to bring glass to a highly polished finish after grinding to desired shape.
« Last Edit: April 19, 2017, 06:58:50 AM by Psuggmog Volbenz »
Logged
I'm squeezin' and they're wheezin': old junker boxes

Alexis

  • Member
  • *
  • Offline Offline
  • Posts: 14
Re: How to polish celluloid
« Reply #23 on: April 18, 2017, 06:37:20 PM »

to polish celluloid I have used a kit to polish the headlights of cars, these usually become yellowish and grated after a long time. The kit in question has 4 numbered pads, are actually sandpaper but incredibly thin a white polishing paste and a specific liquid for the finish. I did not use the final liquid.

First the thicker one is used and the fine one (it is not no mystery) is finished and then the white paste with cotton is passed.

The result is very good and less dangerous, with the dremel you have to be very tactful and do not push too much because it burns.

The product is called Turtle Wax Lens restorer.
Logged

Vallenato831

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 201
Re: How to polish celluloid
« Reply #24 on: November 03, 2020, 10:35:06 PM »

Brasso or other metal polish works well. Apply by hand on a soft cloth.

I tried this just recently with Brasso.  Very lightly by hand and the cloth turned red.  Immediately stopped as not wanting to damage the celluloid.   Normal for the cloth to pick up the red celluloid with Brasso and furniture polish? 
Logged
Corona III x8

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: How to polish celluloid
« Reply #25 on: November 03, 2020, 11:26:32 PM »

I use brasso too, yes the cloth will show some colour because it is a very fine abrasive.  Celluloid faces with exposure to light and air and an abrasive polish removes a very fine surface layer which can reveal unfaded material with a brighter colour. It’s exactly the same principle as a cutting polish on car finish.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

odonovanchris

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 276
    • Instagram Accordion Profile: chris0donovan
Re: How to polish celluloid
« Reply #26 on: November 04, 2020, 01:10:37 AM »

do not......I repeat......DO NOT use eyeglasses cleaning fluid!!  8)
Logged
See my accordion projects on Instagram: https://www.instagram.com/chris0donovan/

Winston Smith

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4066
  • AKA Edward Jennings
    • "Our Luxor B&B" Luxor life, slice by slice.
Re: How to polish celluloid
« Reply #27 on: November 04, 2020, 08:42:48 AM »

"It’s exactly the same principle as a cutting polish on car finish."

In the "olden days" I had a car spray painter who would polish the finished cellulose paint with either Brasso or Mepo (same thing) until a polishing cloth would slide off the bonnet by itself. They are ideal for a very fine finish.
Logged
At last, broken and resigned to accept conformity.
Oh, how I LOVE Big Brother!

Tone Dumb Greg

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4955
    • Dartmoor Border Morris
Re: How to polish celluloid
« Reply #28 on: November 04, 2020, 08:51:17 AM »

Then there's luthier's burnishing cream, if you want to go all posh.
A word from the wise, though. Avoid anything with beeswax, or the like, in it unless you want the box to keep slipping away as you try to play it.
Logged
Greg Smith
DG/GC Pokerwork, DG 2.4 Saltarelle, pre-war CF Hohner, Hohner 1040 Vienna style, old  BbEb Hohner that needs a lot of work.

ACCORDION, n. An instrument in harmony with the sentiments of an assassin. Ambrose Bierce

richard.fleming

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 556
Re: How to polish celluloid
« Reply #29 on: November 04, 2020, 09:15:14 AM »

I don't think I'd be that keen on polishing unless maybe I wanted to sell the box, and even then it might make me feel guilty - after all, one is wearing away a layer of the celluloid when using an abrasive polish, no matter how carefully.
Logged
Old Paolo Sopranis in C#/D and D/D#

Squeaky Pete

  • Squeaky Pete
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1327
  • Re-hohn a Hohner
Re: How to polish celluloid
« Reply #30 on: November 04, 2020, 10:01:43 AM »

Isn't the lettering screen printed on?
You wouldn't want to polish that off.
Logged
Poker work DG.
Pariselle 2.6 DG, Ex-Club IIIBS CF,
Matching Liliputs in CF and DG,
Lots of sickly Hohners needing TLC,
Bassoon, Various Bagpipes........

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: How to polish celluloid
« Reply #31 on: November 04, 2020, 10:11:00 AM »

I don't think I'd be that keen on polishing unless maybe I wanted to sell the box, and even then it might make me feel guilty - after all, one is wearing away a layer of the celluloid when using an abrasive polish, no matter how carefully.

Agreed, polishing with a cutting polish is something to do very occasionally.  For regular cleaning a soft cloth dampened with a mild detergent solution is all you need.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Rog

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2525
  • Repair and tuning in Hants
Re: How to polish celluloid
« Reply #32 on: November 04, 2020, 07:35:55 PM »

My celluloid cleaning weapon of choice is T-Cut. It brings up celluloid beautifully...car paint restorer.
Interesting side note: Will on The Repair Shop uses T-Cut to put a fine shine on shellac French polish (not all the time..but it’s one of his techniques). In fact it does work very well if you’ve painted on Shellac (using a rubber on fretworked concertina ends is a problem... you end up with dragged shellac clogging the holes). Paint on the shellac. Leave it for 24hrs to harden, fine wire wool it to take out the brush marks, then T-Cut.
Further side note: when I asked Mark Lloyd-Adey (Mr concertina spares) how he finished his concertina ends he told me he dilutes shellac a bit and sprays it on with one of those little spray guns.

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: How to polish celluloid
« Reply #33 on: November 04, 2020, 07:39:42 PM »

Further side note: when I asked Mark Lloyd-Adey (Mr concertina spares) how he finished his concertina ends he told me he dilutes shellac a bit and sprays it on with one of those little spray guns.

And another side note.  My daughter tells me that sprayed shellac is the way to the ultimate in painted fingernails.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

rees

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 5055
  • Windjammer
    • Wesson Accordions
Re: How to polish celluloid
« Reply #34 on: November 04, 2020, 10:42:39 PM »

Further side note: when I asked Mark Lloyd-Adey (Mr concertina spares) how he finished his concertina ends he told me he dilutes shellac a bit and sprays it on with one of those little spray guns.

And another side note.  My daughter tells me that sprayed shellac is the way to the ultimate in painted fingernails.

Do they have to mask off the rest of their arm?
Logged
Rees Wesson (accordion builder and mechanic)
Gungrog, Welshpool, Wales, UK
www.melodeons.com

hickory-wind

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 627
  • Lives in NY USA near the Erie Canal
    • Bellingers' Button Boxes
Re: How to polish celluloid
« Reply #35 on: November 05, 2020, 05:32:38 AM »

Stew-Mac makes some wonderful graded polishing cloths:
https://www.stewmac.com/luthier-tools-and-supplies/supplies/sanding-and-polishing/sandpaper-and-finishing-papers/micro-mesh-finishing-pack.html
and touch up sticks:
https://www.stewmac.com/luthier-tools-and-supplies/supplies/sanding-and-polishing/micro-mesh-dual-angle-touch-up-sticks-set-of-4.html
that start at 1500 grit and end at 12000 grit going through 8 or 9 steps. For small jobs it will take you from dull matt to glossy sheen in a matter of minutes.

Scott
Logged
too many boxes...please buy one, or two, or

Gav Wood

  • Good talker
  • **
  • Offline Offline
  • Posts: 99
Re: How to polish celluloid
« Reply #36 on: November 05, 2020, 08:29:20 PM »

I have had a bit of experience (failing) with celluloid on a paolo soprani.
I found the pattern was on the top layer, but colour lower, and have rubbed through the top patterned layer.
I used wet and dry.
I really failed by having the acetone water mix too strong, so the celluloid melted too quickly, was trying to lay a large area.
Could be repaired as i have spare celluloid, but have moved on to other projects.
Logged

Pat McInnis

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 390
Re: How to polish celluloid
« Reply #37 on: November 06, 2020, 04:51:24 PM »

Ahh what a timely thread!! I was just trying to figure out how to rejuvenate my latest project. The green/grey celluloid is very faded and oxidized. I have a ton of car polish from full cut to mirror polish. I'll do some experimenting today. I like the carnuba wax idea as a sealer too.
Logged

Vallenato831

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 201
Re: How to polish celluloid
« Reply #38 on: November 06, 2020, 08:42:25 PM »

I use brasso too, yes the cloth will show some colour because it is a very fine abrasive.  Celluloid faces with exposure to light and air and an abrasive polish removes a very fine surface layer which can reveal unfaded material with a brighter colour. It’s exactly the same principle as a cutting polish on car finish.

Good to know, was worried!  Thanks Theo, and the rest of you!
Logged
Corona III x8

Rob2Hook

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2278
  • Castagnaris, Hohners & Baffetti
Re: How to polish celluloid
« Reply #39 on: November 07, 2020, 01:50:15 PM »

I was watching a Youtube vid on restoring a vintage guitar and when it came to replacing the pickguard he discovered something interesting.  The old stock of celluloid he had had the colour and pattern throughout, whereas new stock has a plain colour in the material and a printed pattern on the top surface.  In the context of our old boxes, the original covering can be expected to respond well to abrading and polishing to remove years of degradation, but beware of any patches and repairs which may contain modern material!


Rob.
Logged
Pages: 1 [2] 3   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal