Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: sizes of end frames on one-rows  (Read 1629 times)

0 Members and 1 Guest are viewing this topic.

mselic

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1683
sizes of end frames on one-rows
« on: June 15, 2017, 08:39:04 PM »

Why do most 4-stop one-rows have "doubled-up" end frames on each side?  The Hohner HA114s only have single end frames that are about an inch wide and are able to house four sets of upright reeds without issue (the bellows being attached to thin wooden frames that fit within the end frames).  This results in a very compact box.  Almost every other 4-stop one-row that I've seen has two sets of frames per side that sandwich together, resulting in a very beefy and bulky box, and seemingly unnecessarily so.  Can any builders and other members here offer any idea as to why this has become the norm?  It seems to me that one-rows don't need to be any bigger than the Hohner HA114s and, given the desire for more compact boxes these days, it has always mystified me as to why they are all built this way.

Logged
C#/D player

boxcall

  • You got to love it!!!
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1801
Re: sizes of end frames on one-rows
« Reply #1 on: June 15, 2017, 10:58:31 PM »

Even Hohner 114 has two frames it's just one fits inside the other and it's thinner in profile so endas up being smaller in overall size. Both methods still rely on gaskets to make a seal. And of course screws or pins hold things tight.
Logged
Hohner 1040 C, Beltuna one row four stop D, O'Byrne Dewitt/ Baldoni bros. D/C#, Paolo soprani "pepperpot" one row D

mselic

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1683
Re: sizes of end frames on one-rows
« Reply #2 on: June 15, 2017, 11:27:17 PM »

Yes, I did mention that in my post. It seems to be a perfectly good system, so I'm wondering why a larger, more bulky combination of frames is the norm. It seems to me that the frames that attach to the bellows could be any size at all, so why make them larger than they need to be? I'm actually really curious to know!
Logged
C#/D player

boxcall

  • You got to love it!!!
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1801
Re: sizes of end frames on one-rows
« Reply #3 on: June 16, 2017, 12:44:07 AM »

Well they do need to be a certain width for the screwed together system and it's easier.
A frame on Hohner is fitted and pinned so not as easy?
Rees would know if it takes more time.
Logged
Hohner 1040 C, Beltuna one row four stop D, O'Byrne Dewitt/ Baldoni bros. D/C#, Paolo soprani "pepperpot" one row D

Winston Smith

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4066
  • AKA Edward Jennings
    • "Our Luxor B&B" Luxor life, slice by slice.
Re: sizes of end frames on one-rows
« Reply #4 on: June 16, 2017, 01:07:50 AM »

How about the need for more clearance between taller bass and treble reedblocks? (Just a thought.)
Logged
At last, broken and resigned to accept conformity.
Oh, how I LOVE Big Brother!

tirpous

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1403
Re: sizes of end frames on one-rows
« Reply #5 on: June 16, 2017, 01:28:14 AM »

Quote
Why do most 4-stop one-rows have "doubled-up" end frames on each side?

That's the way the old 'german model' one-row melodeons were made.  Some of them were excellent, so they were copied.

Another compact departure from the norm was used by some Quebec makers (Gagné and Messervier among others) - they kept only the bellows frames and screwed endplates on.

 
Logged

mselic

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1683
Re: sizes of end frames on one-rows
« Reply #6 on: June 16, 2017, 03:36:06 AM »

How about the need for more clearance between taller bass and treble reedblocks? (Just a thought.)

That thought occurred to me, but the Hohner HA114s were made in various keys and clearance was never an issue with reeds of any size.
Logged
C#/D player

mselic

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1683
Re: sizes of end frames on one-rows
« Reply #7 on: June 16, 2017, 03:47:10 AM »

Another compact departure from the norm was used by some Quebec makers (Gagné and Messervier among others) - they kept only the bellows frames and screwed endplates on.

Yes, this is exactly what I'm talking about. I'm surprised that boxes aren't made like this more often. Is it really just tradition that keeps people making boxes a particular way? I have a Beltuna "Cajun" one-row, which is a fantastic box, but I don't see any reason why the bellows frames need to be so wide - you could easily lose two inches on the width of the box and make it more compact, easier to travel with, etc. I know Rees makes a model based on the HA114, with an improved keyboard mechanism, and I'd love to see more builders offer 4-stop models on that size.
Logged
C#/D player

Andy Next Tune

  • aka Andy Wooles
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1127
  • Melodeon with Accidentals? Make a PI Claim!!!
    • www.shavethedonkey.co.uk
Re: sizes of end frames on one-rows
« Reply #8 on: June 16, 2017, 02:02:12 PM »

I wonder if ease of construction is part of the answer.

When I built a one-row with Emmanuel, his design followed the early German design.
Two rectangular frames were constructed (left and right) as single units, sanded down, and 'finished, before being sawn in half to create the two sections - the bellows frame and the end frame.
The chances of them fitting together and sealing are therefore pretty good, even if the absolute precision is not there!

The HA114 method requires the building of separate frames to different designs which must then fit together. More precision in manufacturing is therefore needed.

Rees uses both methods with his one row boxes.
Logged
Andy, from the now ex-County Palatine of Cheshire

Caring for a European community of melodeons from France, Italy, Germany, Wales and Suffolk!

rees

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 5055
  • Windjammer
    • Wesson Accordions
Re: sizes of end frames on one-rows
« Reply #9 on: June 16, 2017, 03:37:55 PM »

Thanks Andy, I was just about to say that.

The Windjammer with frames and bellows pins are indeed slightly more difficult to construct.
Logged
Rees Wesson (accordion builder and mechanic)
Gungrog, Welshpool, Wales, UK
www.melodeons.com

boxcall

  • You got to love it!!!
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1801
Re: sizes of end frames on one-rows
« Reply #10 on: June 16, 2017, 03:53:55 PM »

I wonder if ease of construction is part of the answer.

When I built a one-row with Emmanuel, his design followed the early German design.
Two rectangular frames were constructed (left and right) as single units, sanded down, and 'finished, before being sawn in half to create the two sections - the bellows frame and the end frame.
The chances of them fitting together and sealing are therefore pretty good, even if the absolute precision is not there!

The HA114 method requires the building of separate frames to different designs which must then fit together. More precision in manufacturing is therefore needed.

Rees uses both methods with his one row boxes.

My thoughts are the same in reply #3. I just didn't say it as well, Andy



Logged
Hohner 1040 C, Beltuna one row four stop D, O'Byrne Dewitt/ Baldoni bros. D/C#, Paolo soprani "pepperpot" one row D

tirpous

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1403
Re: sizes of end frames on one-rows
« Reply #11 on: June 16, 2017, 06:28:03 PM »

Quote
I wonder if ease of construction is part of the answer.

When I built a one-row with Emmanuel, his design followed the early German design.
Two rectangular frames were constructed (left and right) as single units, sanded down, and 'finished, before being sawn in half to create the two sections - the bellows frame and the end frame.
The chances of them fitting together and sealing are therefore pretty good, even if the absolute precision is not there!

True, but the funny thing is, the old Globe, Monarch, etc... boxes had slightly smaller bellows frame made separately with a lighter wood (spruce?) covered with buckram-like material and 'reinforced' with fairly thin metal corners.  I may be wrong but I suspect the single unit method you describe originated with Louisiana makers. 
Logged

mselic

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1683
Re: sizes of end frames on one-rows
« Reply #12 on: June 17, 2017, 03:22:58 AM »

I wonder if ease of construction is part of the answer.

I suspect that you're right, along with everyone else who put forward the same suggestion.  The fact that there are differing systems in fastening the two sets of frames together did not occur to me.  I could see how using screws as opposed to pins would expedite things.  However, (and in all fairness to builders everywhere!) if it can be done on inexpensive Hohners, it can certainly be done on a box costing thousands of dollars or pounds!

Hohner also sold a "Cajun IV" one-row model which had bellows pins and compact end frames.  I played one once and, although it wasn't a high-end box, I loved the compact size and feel of it.  I would love to see more one-row models follow a similar design :)  There is a picture of one here:

http://www.reyesaccordions.com/Images/cajuniv.jpg

Thanks for all the input.
Logged
C#/D player
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal