Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1] 2 3 4   Go Down

Author Topic: Acceptable?  (Read 12245 times)

0 Members and 1 Guest are viewing this topic.

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Acceptable?
« on: June 21, 2017, 11:35:06 AM »

I have though about posting this on several previous occasions and held back, but I feel I must now share this.

The attached photos are of the treble reeds from a Hohner Liliput in DG which has been converted from BbEb that I have taken as a trade in.  It is mostly fine, but a few notes sound weak and on investigation this is what I find. Reeds with the tips cut off or shortened, and the resulting gap covered with masking tape. Presumably this is to raise the pitch beyond what is possible with filing. Obviously masking tape has a limited life and is beginning to come away resulting in poor performance of the reed. This was sold at a top price to the person I got it from.  I will of course be replacing these reeds before I offer it for sale.

I will refrain from expressing my opinion of this.  It is not the first I have seen like this.  Take care if buying a converted Liliput!
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Winston Smith

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4066
  • AKA Edward Jennings
    • "Our Luxor B&B" Luxor life, slice by slice.
Re: Acceptable?
« Reply #1 on: June 21, 2017, 11:53:52 AM »

Even I wouldn't do that!
Logged
At last, broken and resigned to accept conformity.
Oh, how I LOVE Big Brother!

rees

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 5055
  • Windjammer
    • Wesson Accordions
Re: Acceptable?
« Reply #2 on: June 21, 2017, 12:48:49 PM »

Good grief!
Logged
Rees Wesson (accordion builder and mechanic)
Gungrog, Welshpool, Wales, UK
www.melodeons.com

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Acceptable?
« Reply #3 on: June 21, 2017, 04:15:50 PM »

And here is the one of the replacement reeds I've installed.  Ah that's better  (:)
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: Acceptable?
« Reply #4 on: June 21, 2017, 04:56:06 PM »

I have seen Castagnari use masking tape in their melodeons. Specifically D/G Lillys where the reed plates come up a bit short in what I assume is the 'one size fits all keys' treble casework. They lay masking tape to cover the gap at the top of the reed plate and then wax over it.  ???

Not as bad but not good.

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Acceptable?
« Reply #5 on: June 21, 2017, 05:06:31 PM »

I've see that too Lester, but there the tape is sort of temporary because it only has to support the wax while it cools, then the hard wax takes the strain.
This business of clipping the reeds and filling in with masking tape is in a different league of ban practice.
I wonder if repairers should get together and try to set some quality standards?  The person who does this sells "restored" boxes for top prices.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: Acceptable?
« Reply #6 on: June 21, 2017, 05:18:30 PM »

I've see that too Lester, but there the tape is sort of temporary because it only has to support the wax while it cools, then the hard wax takes the strain.
This business of clipping the reeds and filling in with masking tape is in a different league of ban practice.
I wonder if repairers should get together and try to set some quality standards?  The person who does this sells "restored" boxes for top prices.

I agree it's no where near as bad but if you convert a D/G Lilly to 4th button start it seems, to both me and the owners, to improve the sound immensely which I put down to better matching of the reed plates to the reed cavity and the reed plate now being properly supported on all 4 edges.

tirpous

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1403
Re: Acceptable?
« Reply #7 on: June 21, 2017, 05:30:16 PM »

Would it be acceptable/possible to fill the gap left after the reed is shortened with solder or epoxy ??
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Acceptable?
« Reply #8 on: June 21, 2017, 05:35:07 PM »

Yes I think that could be done, but why would you want to?  There is simply no need to abuse reeds like this.  I've converted many old Hohners to DG using original reeds, and never had to resort to this.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

tirpous

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1403
Re: Acceptable?
« Reply #9 on: June 21, 2017, 06:00:16 PM »

I was thinking maybe this could be a useful technique when the pitch of a reed must be raised more than is possible with filing alone.   
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Acceptable?
« Reply #10 on: June 21, 2017, 06:27:46 PM »

As a temporary measure perhaps, but not in preparing something for sale.  Then you need to find a reed if the correct pitch.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

boxer

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 380
  • B/C Pokerwork - ultimate ceili box
Re: Acceptable?
« Reply #11 on: June 21, 2017, 06:49:01 PM »

reminiscent of some of the worst practices in the motor trade if you ask me. 

of all traditional musical instruments, the box must be the easiest to abuse in this way.  I'd guess that most owners wouldn't ever look inside their box to check out details like this, and, even if they did, wouldn't know what they were looking at, or what to look for.  They'd more likely trust, or be easily persuaded to trust, the word of the "expert" who sold it to them.

I'm sure there are legal terms for what these people are doing.
Logged
Nuage, Tommy, Cairdin, 
Double Ray DLX 21x12, Black Dot,
Pre-Erica, Pokerwork
plus various stringed things

baz parkes

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1894
    • All Blacked Up
Re: Acceptable?
« Reply #12 on: June 21, 2017, 08:20:53 PM »

I have though about posting this on several previous occasions and held back, but I feel I must now share this

I think your restraint has been admirable...
Logged
On the edge of Cheshire's Golden Triangle, apparently...

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Acceptable?
« Reply #13 on: June 21, 2017, 08:32:13 PM »

Appreciate that Baz.   I found it very stressful to write.  I really don't like criticising the work of others, but I've seen exactly this type of poor practice too many times to not say something.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

invadm

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 613
Re: Acceptable?
« Reply #14 on: June 21, 2017, 09:08:12 PM »

Take care if buying a converted Liliput!
why NOT just take it as original key -that it is made in  ;) and enjoy?  and think what you are asking your repairer to do for you.
play C/F or Bb/Eb if you must have a liliput they weren't made in anyother key as far as know.
Acceptable? surely not if it doesn't play as it should.
Logged

hickory-wind

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 627
  • Lives in NY USA near the Erie Canal
    • Bellingers' Button Boxes
Re: Acceptable?
« Reply #15 on: June 21, 2017, 09:34:12 PM »

Some from my 'museum' bin.

Pitch was raised on the large reed, and lowered on the adjacent reed...with wax.

Scott


BellingersButtonBoxes.com
« Last Edit: June 21, 2017, 11:42:34 PM by hickory-wind »
Logged
too many boxes...please buy one, or two, or

rees

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 5055
  • Windjammer
    • Wesson Accordions
Re: Acceptable?
« Reply #16 on: June 21, 2017, 11:51:45 PM »

I used to hang out with Flaco Jimenez. He told me that in the Rio Grande area they had to make replacement reeds out of old watch springs, very clever and highly enterprising.
However, in this day and age when reeds of all shapes and sizes are so readily available this kind of blacksmith work should be shunned.
Most of us fettler types know each other in some way (it's a niche market) and we do share an unwritten code of practice. We are always aware that further down the line another fettler will be witness to our craftsmanship, so the system is kind of self-policing.
« Last Edit: June 26, 2017, 12:06:23 PM by Rees »
Logged
Rees Wesson (accordion builder and mechanic)
Gungrog, Welshpool, Wales, UK
www.melodeons.com

Broadland Boy

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1243
  • Awful noises from Pokerwork, HA114G, BbEb Liliputs
Re: Acceptable?
« Reply #17 on: June 22, 2017, 12:52:33 AM »

Do you think someone had changed that reed 'pre butchery' Theo ? (your top photo) as the rivet looks to have been set / headed with a cross hatched set or punch, unlike the neighbours.

With the advent of the various squeezebox forums, players are probably better informed now on the internals of the box than in pre internet days but those who would confidently pull the bellows pins or otherwise access the internals for inspection before parting with hard cash are probably still in the minority but asking the vendor to show them inside ought to be an expected part of a sale (from a dealer) and if not 'convenient' ought to be a warning for the emptor to caveat.



Logged
Richard A
Venit ventus contrarius ventus egrediente,
Omnes prope quid ventum est circa

JD

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 235
Re: Acceptable?
« Reply #18 on: June 22, 2017, 12:02:08 PM »

However, in this day and age when reeds of all shapes and sizes are so readily available this kind of blacksmith work should be shunned.
I thought the non-standard size of Liliput reeds made them hard to replace. Even if that's true it doesn't excuse what has happened here.

Most of us fettler types know each other in some way (it's a niche market) and we do share an unwritten code of practice.
I had always assumed this. In a small industry bad news travels fast and reputation is everything.

This thread has prompted me to take a look inside my converted Liliput (not D/G) and I am very pleased to say I can't see anything like Theo's pictures. I wonder if the melodeon community is split into two groups, those who routinely open up a new box to inspect the innards and those who leave well alone and just get on with playing until something definitely sounds wrong. Despite having worked as an engineer for longer than I care to think about I am in the second group.
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Acceptable?
« Reply #19 on: June 22, 2017, 12:13:29 PM »

However, in this day and age when reeds of all shapes and sizes are so readily available this kind of blacksmith work should be shunned.
I thought the non-standard size of Liliput reeds made them hard to replace. Even if that's true it doesn't excuse what has happened here.
That is true up to a point. I think most of us who work on Liliputs have a few scrap boxes for spares.  Contemporary miniature Hohner piano accordions use the same width reed plates, and standard size Hohner reeds from the 30s just need to have .75mm filed or milled off each side. So it's not really a problem, just needs a bit of effort.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning
Pages: [1] 2 3 4   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal