Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Cracks in fondo  (Read 3396 times)

0 Members and 1 Guest are viewing this topic.

Stockaryd

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 255
Cracks in fondo
« on: June 30, 2017, 11:01:06 PM »



I am having fun. !

I have bought another Melodeon. 12 pounds.
There is a bit of a leak of course.  Bellows seems OK.
If I lift it in a strap, noise is heard.
If I let it "collaps", slowly, noise is also heard. 

The box have been "fixed "  before.  Reeds are of different kinds,  but seem OK   and the wax also.  The blocks are slightly loose.

When I try to "play", - one tone is heard +  some extra noise.

Some pallets have wood/leather others have wood/felt.

I guess the right thing is wood/leather.

Q;  which glue is suitable for wood/leather? Skin glue? Textile glue?

When I took off the pallets, I could see small cracks on the fondo, between the holes in the plywood.

Q;  should I create a new fondo?    (with better plywood? )

A spring on the bass-side is also broken but that is a later problem.
Logged
Hohner Corso, Hohner Erica, Emmanuel Pariselle, Gessner,   Koch,   Mariotti,    "China  NoName",   4 Toy,     -and now some more

Malcolm Clapp

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1119
  • Loving my Hohner-reeded wet MMM CastaTommy
Re: Cracks in fondo
« Reply #1 on: July 01, 2017, 04:02:52 AM »

Ideally, the pallets should be wood/felt/leather, though wood/leather would work, but could get noisy. My bet is that the continuous sound on both push and pull is through the pallets consisting only of wood and felt, though the broken spring in the bass may also contribute. For refacing pallets, I use a contact adhesive, smeared thinly, certainly not thickly enough for it to seep deeply into the felt or leather.

As for the cracks in the fondo, depends how bad they are (photo?) If one long fairly straight crack, you could cut away the cracked area and glue in a shim of suitable wood, then sand back and refinish. However, if there are lots of small cracks, and/or if there is any degree of warping, then a new fondo might be the way to go.

Hope this helps....
Logged
Tuner/repairer, now retired.

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Cracks in fondo
« Reply #2 on: July 01, 2017, 08:35:34 AM »

A photo would help!
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Stockaryd

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 255
Re: Cracks in fondo
« Reply #3 on: July 01, 2017, 10:23:46 AM »

Logged
Hohner Corso, Hohner Erica, Emmanuel Pariselle, Gessner,   Koch,   Mariotti,    "China  NoName",   4 Toy,     -and now some more

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Cracks in fondo
« Reply #4 on: July 01, 2017, 11:07:42 AM »

Worth a try to stick the loose bits down with superglue.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Stockaryd

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 255
Re: Cracks in fondo
« Reply #5 on: July 01, 2017, 11:20:29 AM »

Lots of cracks  (and loose bits),  and cracks  in every direction.   When I hold my face above the fondo, it is a "nice breeze"  no matter what button I press.  :) 

How difficult is it to make a new fondo?  I belive the one in place is not the original one.
Logged
Hohner Corso, Hohner Erica, Emmanuel Pariselle, Gessner,   Koch,   Mariotti,    "China  NoName",   4 Toy,     -and now some more

John MacKenzie (Cugiok)

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2360
  • Fettling... Learning to reed and right.
Re: Cracks in fondo
« Reply #6 on: July 01, 2017, 11:53:13 AM »

As you have the old one for a template. I should think it would be easy. Removing the old one might be the hardest part ;)

Sir John
Logged
There is no beginning to my talent :)



: Hohner Club Modell 1. Bb/Eb, de-clubbed : Early Hohner Pressed Wood A/D : 1930's Varnished wood G/C:  Hohner Erika C/F: Bandoneon tuned D/G Pressed wood: Koch F/Bb; G/C Pre Corso

triskel

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3290
Re: Cracks in fondo
« Reply #7 on: July 01, 2017, 02:42:01 PM »

Removing the old one might be the hardest part ;)

Removing the old one without wrecking everything, more to the point...  :-\

Stockaryd

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 255
Re: Cracks in fondo
« Reply #8 on: July 01, 2017, 03:35:21 PM »


Just got a suggestion from a friend.
"acrylic glass" on top of the existing fondo.
 
What do you think?    And what kind of glue this time?   
Logged
Hohner Corso, Hohner Erica, Emmanuel Pariselle, Gessner,   Koch,   Mariotti,    "China  NoName",   4 Toy,     -and now some more

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Cracks in fondo
« Reply #9 on: July 01, 2017, 04:14:32 PM »

Making a lot of work.  Glue up the cracks first,  see if that works before doing bigger tasks. If you put an extra layer on top of the existing ply you will have to:
- ensure all the holes line up
- ensure the join with the new material is completely airtight around every hole.
- modify the keyboard and/or action to accommodate the extra thickness under the pallets.

Simple solutions are usually best.

Superglue is actually very good for repairing small cracks and delamination in the edge of plywood because it travels along cracks by capillary attraction,
« Last Edit: July 01, 2017, 04:16:26 PM by Theo »
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Stockaryd

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 255
Re: Cracks in fondo
« Reply #10 on: July 01, 2017, 08:38:54 PM »

OK   -  SuperGlue

Simple solutions are usually best. 

I can only agree.  I will try that.  First.   :)      Thank you all.
Logged
Hohner Corso, Hohner Erica, Emmanuel Pariselle, Gessner,   Koch,   Mariotti,    "China  NoName",   4 Toy,     -and now some more

Malcolm Clapp

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1119
  • Loving my Hohner-reeded wet MMM CastaTommy
Re: Cracks in fondo
« Reply #11 on: July 02, 2017, 11:18:17 AM »

In my earlier answer, I had visions of cracks running longitudinally across the fondo, but your photo shows otherwise in that the cracks are along the grain.
I would have to agree that Superglue is worth a go.

Good luck.
Logged
Tuner/repairer, now retired.

Stockaryd

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 255
Re: Cracks in fondo
« Reply #12 on: July 07, 2017, 04:29:21 PM »

Well,  now I glued (superglue) in every four corners of every  hole  (you know what I mean  ;)  )   Made new pallets,  tree + leather.

Much better,  not perfect. Must  change the angel of . . . . . .  or make the tree- pallets thicker . . . .


                           Now I will go out and listen to  rock- music  and then later to my son playing . . . . rock music!     ;)
Logged
Hohner Corso, Hohner Erica, Emmanuel Pariselle, Gessner,   Koch,   Mariotti,    "China  NoName",   4 Toy,     -and now some more

Stockaryd

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 255
Re: Cracks in fondo
« Reply #13 on: July 09, 2017, 11:55:39 AM »



Well . . .

Now I have glued small wooden pieces to each other with hide glue.
After that, glued leather on them with white wood glue.

Tomorrow I will glue these pallets on   (.levers ? ? ?  . . . )   with glue gun.
The glue gun will make a spider web of plastic threads.


Sorry that I can not all terms?    I have to do every step three times to get it  right  (sort of)
Logged
Hohner Corso, Hohner Erica, Emmanuel Pariselle, Gessner,   Koch,   Mariotti,    "China  NoName",   4 Toy,     -and now some more

Pete Dunk

  • Typo Expert
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3706
Re: Cracks in fondo
« Reply #14 on: July 09, 2017, 11:06:44 PM »

Sorry that I can not all terms?    I have to do every step three times to get it  right  (sort of)

English grammar is difficult at times but everything you say makes perfect sense, please don't worry too much about syntax. :D
Logged
Squeezing on the Isle of Oxney, UK
Primo (Serenellini) D/G
Isis D/G
Hohner B/E, G/C, C/F, Bb/Eb G/C/F
Liliputs D/G (G scale), C/F, Bb/Eb, Albrecht Custom D/G (G scale)

Stockaryd

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 255
Re: Cracks in fondo
« Reply #15 on: July 10, 2017, 08:19:52 PM »

 ;)       . . . . .    And after the gluegun glued the pallets on, . . . .   there is NO  leakings any more.

(  I try to blame all my english mistakes on  "Google translate")    ;)

(The worst thing is I  sometimes  do not know the correct word for a thing, and that I can't explain exactly what I mean )

No   (:)  (:)   (the really bad thing is I do not understand all your jokes fully,   and I  truly miss the limericks!  )
Logged
Hohner Corso, Hohner Erica, Emmanuel Pariselle, Gessner,   Koch,   Mariotti,    "China  NoName",   4 Toy,     -and now some more

Garry Probert

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 296
Re: Cracks in fondo
« Reply #16 on: July 10, 2017, 08:26:26 PM »

Hi mate
Quote
(The worst thing is I  sometimes  do not know the correct word for a thing, and that I can't explain exactly what I mean )
welcome to my world lol
All seemed very clear to me,and an interesting post ,thankyou

I'd rather have Fingers than Toes,
I'd rather have Ears than a Nose.
And as for my Hair,
I'm glad it's all there,
I'll be awfully said, when it goes.



Logged
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal