Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: 1 [2] 3   Go Down

Author Topic: M. HOHNER Logo  (Read 7709 times)

0 Members and 1 Guest are viewing this topic.

tom f

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 112
Re: M. HOHNER Logo
« Reply #20 on: July 12, 2017, 09:22:06 PM »

Thank you all for your thoughts.  All very interesting.  I had rather assumed, perhaps wrongly, that Hohner had a factory in the US.  It would seem that the Company was well established in New York in the early 1900s and with the size of the market they had there it just seemed likely.  So back to my original question.  Based on an Ebay survey Hohner accordeons with the M. HOHNER logo seem to feature a lot in the US but not so in Europe.  Was the M. HOHNER logo kept for export models?
Logged

triskel

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3290
Re: M. HOHNER Logo
« Reply #21 on: July 12, 2017, 09:49:51 PM »

Based on an Ebay survey Hohner accordeons with the M. HOHNER logo seem to feature a lot in the US but not so in Europe.  Was the M. HOHNER logo kept for export models?

If by "the M. HOHNER logo" you mean the wording on the body, and/or the bellows frames, of the instrument - then they ALL had the name like that up until the late 1920s when it started to change to simply "Hohner".

Maybe it's that most of Hohner's production was exported to the the US in earlier years, so that you don't see so many of them here in Europe until the 1930s...

triskel

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3290
Re: M. HOHNER Logo
« Reply #22 on: July 13, 2017, 11:15:17 AM »

I should perhaps point out that Matth. Hohner AG is still the official title of the Hohner Company, whilst there did used to be rival firms in the harmonica industry that were unrelated but bore the Hohner name - they weren't the only ones to use it!

M. Hohner & Co., later Schlott-Hohner & Co., was founded in the early 1920s by another Matthias Hohner, also from Trossingen (where the name Hohner is a common one) but born more than 50 years later, in 1886. In 1905 he married the daughter of the Klingenthal accordion maker Bernhard Glass (who went to Trossingen in 1902/03 to help the giant Hohner Company start accordion production there) and in 1911 the young couple moved to her hometown of Klingenthal. But that business failed early in 1930 due to the expense of being sued by M. Hohner in Trossingen, and the building world economic crisis.

Paul Hohner was the brother of the latter, and made harmonicas in Trossingen for a few years in the early 1920s, until the giant Hohner Company hired his skilled tuner - putting him out of business!

John MacKenzie (Cugiok)

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2360
  • Fettling... Learning to reed and right.
Re: M. HOHNER Logo
« Reply #23 on: July 13, 2017, 12:14:59 PM »

I own an Harmonica made by C H Messner, and while researching the maker's background, I came up with this site. It gives several interesting dates. Including those of when they won Gold Medal's, and when they took over both Koch, and Weiss.
There are also interesting pics.


Sir John


http://www.accordions.com/hohner/2007anni/history.htm
Logged
There is no beginning to my talent :)



: Hohner Club Modell 1. Bb/Eb, de-clubbed : Early Hohner Pressed Wood A/D : 1930's Varnished wood G/C:  Hohner Erika C/F: Bandoneon tuned D/G Pressed wood: Koch F/Bb; G/C Pre Corso

911377brian

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1518
Re: M. HOHNER Logo
« Reply #24 on: July 13, 2017, 12:16:59 PM »

The more you information you give us the more complicated it gets Triskel. What a cut throat outfit they were....
Logged

triskel

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3290
Re: M. HOHNER Logo
« Reply #25 on: July 13, 2017, 01:15:28 PM »

The more you information you give us the more complicated it gets Triskel. What a cut throat outfit they were....

Well I guess you might say that (even though it was his real name) Matthias Hohner in Klingenthal was rather "asking for it" in putting "M. Hohner" in big letters on his products and "& Co." in small ones...  ???

But otherwise, Hohner did pursue a deliberate policy of buying up as many of their harmonica and accordion rivals as possible.

Malcolm Clapp

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1119
  • Loving my Hohner-reeded wet MMM CastaTommy
Re: M. HOHNER Logo
« Reply #26 on: July 14, 2017, 08:12:51 AM »


If I have time tomorrow (and my seasonal flu hasn't got any worse), I'll open up the St Louis and read its entrails, which may tell us something of its manufacturing source. I've owned if for some years, but can't recall any of the internal details.


So what did I notice??? Nothing unexpected really, but the reedwork may be of interest to some....

Steel reeds on individual zinc plates on leather, attached by washered screws between the plates and railway spikes at the top.

The plates are stamped with a 3mm square where you would find a T or H on later Hohners.

The reedplates are quite thin (2.5mm), but wider than later Hohner types, presumably to accommodate the broader reeds.

They reeds and reedplates are both shorter by around 3 to 4 mm, and with much less taper (in fact all but the highest 3 or 4 notes on each block have no discernible taper at all).

The riveted heels are barely wider than the reeds.

Presumably the reeds were made "in house", though I can't recall seeing the square stamping before, so maybe from a specialist reedmaker? Any ideas??? 


Edited to add "on leather".
« Last Edit: July 16, 2017, 11:55:15 AM by Malcolm Clapp »
Logged
Tuner/repairer, now retired.

Harmonicatunes

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 261
    • Harmonicatunes
Re: M. HOHNER Logo
« Reply #27 on: July 14, 2017, 09:25:53 AM »

So Malcolm. All well and good. More to the point however. What's it like to play? What does it sound like?
Logged
Harmonica Player
Just starting with the Box

Malcolm Clapp

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1119
  • Loving my Hohner-reeded wet MMM CastaTommy
Re: M. HOHNER Logo
« Reply #28 on: July 14, 2017, 09:50:15 PM »

So Malcolm. All well and good. More to the point however. What's it like to play? What does it sound like?

In motoring terms, a bit like driving an old FJ Holden when you're used to a new Commodore.  8)
Logged
Tuner/repairer, now retired.

Malcolm Clapp

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1119
  • Loving my Hohner-reeded wet MMM CastaTommy
Re: M. HOHNER Logo
« Reply #29 on: July 15, 2017, 02:05:38 PM »

Actually, as has been pointed out, the above analogy probably wouldn't mean much outside of Oz.

Perhaps I should say it's a bit like running a Commodore 64 when you're used to Windows 10. That should be a bit more universally understood....

I think the main problem with this melodeon is that it is quite a heavy unit for a 2 voice instrument at a bit over 4kgs. The bellows, though airtight, has quite deep folds and tends to sag a bit, causing the response to be delayed upon direction changes, despite the reeds fitting tightly to the reedplate slots, and are quite fast to respond outside the box, especially with modern mylar flap valves fitted. The air valve, a long bar running the whole length of the bass grill, is awkward and badly balanced imho, and I find the 10mm treble buttons too small for my liking.

The reeds sound more mellow than those of later Hohners; something of the tone of a Klingenthal box, but with better volume and response.

Far from unplayable, but cumbersome and hard work. A bit of history, but not really up to the needs or expectations of today's players. If I had the money and time to throw at it, I might consider a new set of bellows, larger buttons and a different air valve assembly, though realistically, it would be hard to justify. So for the moment, it does look good sitting on the shelf, and getting the odd 10 minutes of attention every 6 months or so....
Logged
Tuner/repairer, now retired.

911377brian

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1518
Re: M. HOHNER Logo
« Reply #30 on: July 15, 2017, 03:18:17 PM »

Malcolm, I'm knocked out by the condition of your St Louis. Was it like that when you got it ? It looks brand new. I'm finding it difficult to imagine how a box that old could be restored to that standard...
Logged

Malcolm Clapp

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1119
  • Loving my Hohner-reeded wet MMM CastaTommy
Re: M. HOHNER Logo
« Reply #31 on: July 16, 2017, 01:34:32 AM »

Externally, pretty much "as found", Brian, purchased on eBay Australia from an antiques dealer in 2006. No provenance was given, except that it came from a deceased estate.
A few small scratches and dings here and there, and a little thumb wear to the keyboard edge, and slight knee ware to the bottom of the right hand end, but I don't think it has had a lot of use. Possibly the previous owner(s) found it as awkward to play as I do, and it may have languished in the cupboard for much of its life.
Of course, all the leather straps are replacements, and I've retuned the reeds from A435 to modern pitch with new mylar valves added, but otherwise nothing much has been done to it.
Logged
Tuner/repairer, now retired.

911377brian

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1518
Re: M. HOHNER Logo
« Reply #32 on: July 16, 2017, 11:41:02 AM »

Remarkable,Malcolm. It is so like my recently purchased Koch, now in the capable hands of Lester Bailey for a bit of fine tuning that I can't expect anything better than 'Holden Standard 'playability I suppose....
Logged

Malcolm Clapp

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1119
  • Loving my Hohner-reeded wet MMM CastaTommy
Re: M. HOHNER Logo
« Reply #33 on: July 16, 2017, 12:01:17 PM »

Hopefully, better playability than mine when Lester has applied his magic, Brian.
When you get it back, a photo might be useful for comparison.
Logged
Tuner/repairer, now retired.

911377brian

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1518
Re: M. HOHNER Logo
« Reply #34 on: July 16, 2017, 12:17:42 PM »

If I can find someone who knows how to I will Malcolm....
Logged

Malcolm Clapp

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1119
  • Loving my Hohner-reeded wet MMM CastaTommy
Re: M. HOHNER Logo
« Reply #35 on: July 24, 2017, 12:10:50 PM »

I think they used the St Louis Gold Medal win as an advertising tool for some years, at least until they won a gold medal somewhere else (e.g. 1915 San Francisco???).


Here's a photo of a one row "San Francisco 1915" currently on eBay
Logged
Tuner/repairer, now retired.

triskel

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3290
Re: M. HOHNER Logo
« Reply #36 on: July 24, 2017, 12:43:56 PM »

I think they used the St Louis Gold Medal win as an advertising tool for some years, at least until they won a gold medal somewhere else (e.g. 1915 San Francisco???).


Here's a photo of a one row "San Francisco 1915" currently on eBay

Not that it did them much use in the U.S. in 1915, and hence this one was most-likely made after WWI: "Despite the company’s smart business strategies during wartime, the fate of the American operation shifted dramatically. After June 1915, the New York office could no longer receive shipments of merchandise from Germany and its business essentially came to a standstill."

911377brian

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1518
Re: M. HOHNER Logo
« Reply #37 on: July 25, 2017, 04:05:54 PM »

Malcolm, the Koch is back from Lester and is beautifully in tune now. It's surprisingly quiet for a big lass but has a lovely rich sound. As I find it impossible to put pictures up on the forum you might like to go into completed sales and have a look at Jimmy's very complete set of pictures. I wonder if I only think it's quiet because the box I play most is a 114G? I could of course email some pictures to you.....
Logged

Malcolm Clapp

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1119
  • Loving my Hohner-reeded wet MMM CastaTommy
Re: M. HOHNER Logo
« Reply #38 on: July 25, 2017, 05:15:28 PM »

Brian, assuming I'm looking at the right one, https://onedrive.live.com/?authkey=%21APwvZlXkDj%2DdUcM&id=7339A8AFD81EE1A8%216469&cid=7339A8AFD81EE1A8, I can't see too many similarities except for the long air button bar.

Nice looking melodeon. I see it has 3 sets of reeds, hence the rich tone, but that would make it weighty and needing a bit more oomph to get the volume up, maybe....

Enjoy!


 
Logged
Tuner/repairer, now retired.

911377brian

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1518
Re: M. HOHNER Logo
« Reply #39 on: July 25, 2017, 05:50:30 PM »

Yes to both, a bit weighty and needs some oomph ....
Logged
Pages: 1 [2] 3   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal