Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Reed block construction  (Read 1941 times)

0 Members and 1 Guest are viewing this topic.

Rog

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2525
  • Repair and tuning in Hants
Reed block construction
« on: July 16, 2017, 07:59:56 AM »

in Yeovil in 2014 (Pariselle box making) we made treble reed blocks like this..
1) glue little oblong chamber partitions onto a flat strip using nylon/plastic jig.
2) Turn over and repeat to get both sides of the block
3) glue assembly onto base, which was pre-cut with slots to fit onto the soundboard.
4) this is where is starts to get vague. Emmanuel cut/shaped the top of the reedblock so that it was big at one end and smaller at the other end.
Q: how did he do this? Did he cut with a saw (circular or band?) or sand with the bench sander?
5) Glue on top of reed block, then finish on the sander..

Box construction was done in layers. Glue these bits of timber together, drill/shape/cut, add some more timber etc. So if anyone can add detail on reed block construction that'd be great. Thanks.

Winston Smith

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4066
  • AKA Edward Jennings
    • "Our Luxor B&B" Luxor life, slice by slice.
Re: Reed block construction
« Reply #1 on: July 16, 2017, 08:45:29 AM »

I laughed out loud when I saw this title, as I'm about to embark on making a reedblock of sorts with which to re-tune some long-plate reeds. Our postman delivered a bundle of lollypop sticks only yesterday, as I intend to use them as the reed chamber dividers. I'm not very good with small woodworking, so I thought that they would be a good start to keeping the outer surfaces level.
I'll be watching this thread with extra interest!
Logged
At last, broken and resigned to accept conformity.
Oh, how I LOVE Big Brother!

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: Reed block construction
« Reply #2 on: July 16, 2017, 08:54:46 AM »

in Yeovil in 2014 (Pariselle box making) we made treble reed blocks like this..
1) glue little oblong chamber partitions onto a flat strip using nylon/plastic jig.
2) Turn over and repeat to get both sides of the block
3) glue assembly onto base, which was pre-cut with slots to fit onto the soundboard.
4) this is where is starts to get vague. Emmanuel cut/shaped the top of the reedblock so that it was big at one end and smaller at the other end.
Q: how did he do this? Did he cut with a saw (circular or band?) or sand with the bench sander?
5) Glue on top of reed block, then finish on the sander..

Box construction was done in layers. Glue these bits of timber together, drill/shape/cut, add some more timber etc. So if anyone can add detail on reed block construction that'd be great. Thanks.

3) Judging from my photos the foot was fitted after the top.
4) Dry fit the reeds and mark where the top of the reed plate comes on the block. Join up the dots. Give the block to Manu, he then cuts the block using the band saw to just below the marks (this was the clever bit so always left to the man himself). Fit the top of the block. Fit bodge blocks where needed

Fitting the top

Bodge blocks

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Reed block construction
« Reply #3 on: July 16, 2017, 09:00:00 AM »

And don't try to fill the smallest chambers with grooved pieces as in Lester's second photo.  That was an unsuccessful experiment.  A simple wedge shape that widens towards the vent is much better at improving performance of the highest pitch reeds.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Jeremy Burnett

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 116
Re: Reed block construction
« Reply #4 on: July 16, 2017, 09:35:17 AM »

I had an "I am dead" moment with Emmanuel with this. But he sorted it out with his usual dexterity!
Logged

Rog

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2525
  • Repair and tuning in Hants
Re: Reed block construction
« Reply #5 on: July 16, 2017, 09:44:02 AM »

Excellent ...keep it coming!  Curious to know about any other approaches too. I've seen the vid of reed block making with pieces of ply cut with a CNC m/c and glued in layers. But I don't have one of those machines.

Thanks Lester...yes I can see why the foot would be fitted after cutting the top. You'd need to lay the block flat on its side for cutting the top, and the foot would get in the way.
« Last Edit: July 16, 2017, 09:47:10 AM by RogerT »
Logged

diatonix

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 622
Logged

Rog

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2525
  • Repair and tuning in Hants
Re: Reed block construction
« Reply #7 on: July 16, 2017, 11:41:11 AM »

Please don't do it  my way:
https://www.facebook.com/olav.bergflodt/videos/vb.1226742509/10206360942682209/?type=2&theater
:-\
eek. I accidentally caught the plastic push stick on the blade of my table saw. Very glad it was the push stick and not my hand...

rees

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 5055
  • Windjammer
    • Wesson Accordions
Re: Reed block construction
« Reply #8 on: July 16, 2017, 11:54:44 AM »

Aaaargh Olav, you bad boy! ;)

There was a post on here a couple of years ago where someone had made a jig for this very purpose.
I wish I could find it.
Logged
Rees Wesson (accordion builder and mechanic)
Gungrog, Welshpool, Wales, UK
www.melodeons.com

diatonix

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 622
Re: Reed block construction
« Reply #9 on: July 16, 2017, 01:44:54 PM »


eek. I accidentally caught the plastic push stick on the blade of my table saw. Very glad it was the push stick and not my hand...

I find that the typical push sticks that come with these table saws are not only unpractical and useless, but also quite dangerous. I use my home made push tools (not sticks!) for most of the more delicate tasks, but in this very case I find that the piece to be cut is best controlled by hand.
« Last Edit: July 16, 2017, 04:47:06 PM by diatonix »
Logged

Rog

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2525
  • Repair and tuning in Hants
Re: Reed block construction
« Reply #10 on: July 17, 2017, 07:33:36 AM »

Completely agree...but unless you have an accident with a plastic push stick you wouldn't necessarily know how bad they are!!

Broadland Boy

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1243
  • Awful noises from Pokerwork, HA114G, BbEb Liliputs
Re: Reed block construction
« Reply #11 on: July 17, 2017, 02:21:02 PM »

A drop or two of hot melt glue and chopstick sized push sticks make decent remote and non slip manipulators for small parts through a bandsaw, depends how much fence clearance there is on a circular saw as the 'flip up' effect on the rising bit of the blade may bite.

Delighted to still have a full compliment of digits, largely through the influence of that which protects the young with more enthusiasm than experience or sense.........

Agree the conventional push stick is inferior to the 'inverted bench hook' type - the well meaning introduction of these into the food industry brought on a spike in cut accidents. Running operator safety courses on bandsaws, if the candidates seemed somewhat disinterested at the outset, my opening gambit was generally along the lines of 'how many fingers am I holding up? how many of them are yours?' rarely failed to galvanise interest :o
Logged
Richard A
Venit ventus contrarius ventus egrediente,
Omnes prope quid ventum est circa
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal