Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: broken screw in keyboard  (Read 1796 times)

0 Members and 1 Guest are viewing this topic.

mselic

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1683
broken screw in keyboard
« on: August 08, 2017, 10:06:49 PM »

Without much warning, the screw that fastens the keyboard to the frame on my Hohner HA114 broke as it was going back in.  I now have one half of the screw stuck in the keyboard thread.  Not sure what my options are here...I suppose a screw extractor, but even if I do manage to get it out, how would I attach the keyboard now?
Logged
C#/D player

playandteach

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3526
  • Currently a music teacher in a high school.
Re: broken screw in keyboard
« Reply #1 on: August 08, 2017, 10:20:55 PM »

Can I just say that I paid a lot of money for a screw extractor set, used it successfully and mislaid it. I bought a cheap set which was totally hopeless. One product where the quality of metal matters.
Logged
Serafini R2D2 GC, Serafini GC accs 18 bass

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: broken screw in keyboard
« Reply #2 on: August 08, 2017, 10:38:36 PM »

If you get the broken screw out you need M3 x 30mm screw. It's rather a small diameter to get a screw extractor into. There other ways of removing screws - cut a slot in the broken end and use a screwdriver; use a small pointed tool (centre punch) to turn the screw enough to grasp the end with pliers.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Winston Smith

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4066
  • AKA Edward Jennings
    • "Our Luxor B&B" Luxor life, slice by slice.
Re: broken screw in keyboard
« Reply #3 on: August 08, 2017, 10:47:32 PM »

If it's the plastic keyboard, and the screw is stuck in the captive nut, you're just about b******d I'm afraid. The only reason which I can think of that the screw would snap, is that it was cross threaded, which will have spoilt the captive nut. Although, I suppose that it would be possible, if you managed to get the broken bit out, to drill and re-tap the captive nut and use a bigger screw to fasten it together again. Not particularly easy, I'm afraid.
Logged
At last, broken and resigned to accept conformity.
Oh, how I LOVE Big Brother!

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: broken screw in keyboard
« Reply #4 on: August 08, 2017, 11:08:17 PM »

Or maybe drill out the whole captive nut and fix a new on in with epoxy.  Probably best to replace the keyboard with one of these.

http://www.acorninstruments.co.uk/inst.cfm?instID=24
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

george garside

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 5401
Re: broken screw in keyboard
« Reply #5 on: August 08, 2017, 11:30:16 PM »

.  You don't say whether the keyboard is off the box or not?    If it is still partly attached the screw at the other end of the keyboard screw out  so that the keyboard can be removed in its entirety?.  If this is the case  there may then be sufficient of the broken screw protruding from the keyboard to get it out with mole grips.  If the keyboard is off the box and the broken screw is not protruding it may be possible to drill it out carefully , preferably using a  bench  drill press , and then tap the captive nut  a size larger. or if this is not possible to araldite a short length of threaded bar ( ? a  ?m  3screw with the head cut off?) into what remains of the captive nut.  this could then be secured by a nut inside the box.

george
Logged
author of DG tutor book "DG Melodeon a Crash Course for Beginners".

syale

  • The Terrier
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 711
  • When will this MADness stop?
Re: broken screw in keyboard
« Reply #6 on: August 08, 2017, 11:52:00 PM »

Or maybe drill out the whole captive nut and fix a new on in with epoxy.  Probably best to replace the keyboard with one of these.

http://www.acorninstruments.co.uk/inst.cfm?instID=24

Bit tricky fitting a 2 row keyboard on a one row Hohner (HA-114)
Stephen
Logged
HA114 C/G/A/D, 2915 G/C. Liliput, Club IIB C/F Dino Baffetti Modell 22 B Twitter: @syale

Winston Smith

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4066
  • AKA Edward Jennings
    • "Our Luxor B&B" Luxor life, slice by slice.
Re: broken screw in keyboard
« Reply #7 on: August 08, 2017, 11:59:02 PM »

"Bit tricky fitting a 2 row keyboard on a one row Hohner (HA-114)"

But novel, Stephen. Could be the start of a new trend?
Logged
At last, broken and resigned to accept conformity.
Oh, how I LOVE Big Brother!

mselic

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1683
Re: broken screw in keyboard
« Reply #8 on: August 09, 2017, 12:04:34 AM »

The keyboard is off, and a luthier friend of mine and I spent an hour or two getting what's left of the old screw out. We're now looking at drilling out a new thread for a slightly larger screw. I'll let you know how it goes...
Logged
C#/D player

Winston Smith

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4066
  • AKA Edward Jennings
    • "Our Luxor B&B" Luxor life, slice by slice.
Re: broken screw in keyboard
« Reply #9 on: August 09, 2017, 12:13:20 AM »

Sounds as if a new keyboard would be cheaper.
Logged
At last, broken and resigned to accept conformity.
Oh, how I LOVE Big Brother!

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: broken screw in keyboard
« Reply #10 on: August 09, 2017, 01:18:29 AM »

Charlie Marshall sells a replacement keyboard for a Hohner 114.
Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk

mselic

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1683
Re: broken screw in keyboard
« Reply #11 on: August 09, 2017, 01:28:12 AM »

Success! We managed to use a tap and die set to drill a new thread slightly wider than the last and used the corresponding sized screw to fasten it back in place! It only cost me a case of beer, a few hours with a good friend, and I still get to use the accordion this evening as planned! Thank you everyone for your input - much appreciated and helpful.
Logged
C#/D player
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal