Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1] 2   Go Down

Author Topic: Hohner wood  (Read 3951 times)

0 Members and 1 Guest are viewing this topic.

tirpous

  • Hero Member
  • *****
  • Online Online
  • Posts: 1403
Hohner wood
« on: September 14, 2017, 05:53:50 PM »

I'm repairing a Presswood and have to add/match new wood.  Anyone know what type of wood Hohner were using, or has suggestions for a good replacement ??
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Hohner wood
« Reply #1 on: September 14, 2017, 06:35:36 PM »

My best guess would be alder or birch.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Graham Spencer

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3548
  • MAD as a wet Hohner........
Re: Hohner wood
« Reply #2 on: September 14, 2017, 08:10:24 PM »

I've recently replaced a section of the treble keyboard on a Koch (by Hohner) pressed wood box and I used lime (aka linden; the wood known in the USA as basswood is of the same family but softer and less dense than European lime). Lime works easily, has little visible grain, is pale in colour and takes finishes brilliantly.  Alder would also be a good choice for the same reasons, but tends to be a little harder. Personally I wouldn't be so keen on birch as it's not so "anonymous" as lime or alder, and can have prominent grain and little dark knots.

Other opinions may vary......

Graham
Logged
Among others, Saltarelle Pastourelle II D/G; Hohner 4-stop 1-rows in C & G; assorted Hohners; 3-voice German (?) G/C of uncertain parentage; lovely little Hlavacek 1-row Heligonka; Bâ™­/Eâ™­ Koch. Newly acquired G/C Hohner Viktoria. Also Fender Jazz bass, Telecaster, Stratocaster, Epiphone Sheraton, Charvel-Jackson 00-style acoustic guitar, Danelectro 12-string and other stuff..........

Squeezing in the Cyprus sunshine

tirpous

  • Hero Member
  • *****
  • Online Online
  • Posts: 1403
Re: Hohner wood
« Reply #3 on: September 16, 2017, 06:01:34 PM »

Thanks Theo and Graham.

The birch we have here (eastern Canada - yellow birch) tends to be harder and denser than what I see in this Hohner.  Will try alder and linden/basswood for match.  I have offcuts of both somewhere -now, where ??

Martin
Logged

rees

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 5055
  • Windjammer
    • Wesson Accordions
Re: Hohner wood
« Reply #4 on: September 16, 2017, 09:06:08 PM »

I'd go for lime.
Logged
Rees Wesson (accordion builder and mechanic)
Gungrog, Welshpool, Wales, UK
www.melodeons.com

malcolmbebb

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2628
  • In dampest Dorset, on the soggy south coast.
Re: Hohner wood
« Reply #5 on: September 16, 2017, 10:30:42 PM »

Just curious, where in south or south west England can you get a range of woods? The only place I know is Yandle's in Martock.
Logged
Dino BPII.
"Tradition is not the worship of ashes, but the preservation of fire."

rees

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 5055
  • Windjammer
    • Wesson Accordions
Re: Hohner wood
« Reply #6 on: September 17, 2017, 12:00:35 AM »

Under my bed ;)
Logged
Rees Wesson (accordion builder and mechanic)
Gungrog, Welshpool, Wales, UK
www.melodeons.com

tirpous

  • Hero Member
  • *****
  • Online Online
  • Posts: 1403
Re: Hohner wood
« Reply #7 on: September 17, 2017, 03:05:13 AM »

Quote
Under my bed ;)

That would be slumber, right ?
Logged

Rob Lands

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 197
Re: Hohner wood
« Reply #8 on: September 18, 2017, 09:55:41 AM »

If Rees is involved in the project and takes the wood from under his bed there is a chance that it/he might fall through, take care Rees
Logged

Thrupenny Bit

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 7232
  • happily squeezing away in Devon
Re: Hohner wood
« Reply #9 on: September 18, 2017, 10:47:25 AM »

Malcolm: Beach Bros in Exeter are a very old established firm known locally for wood. Google them.
I bought some lengths of Oak some years back to  put onto the back of an old oak beam to enable a curtain track to be firmly fixed. They had a selection of wood beyond the normal builders supplies.
Might be worth investigating....
cheers
Q
Logged
Thrupenny Bit

I think I'm starting to get most of the notes in roughly the right order...... sometimes!

malcolmbebb

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2628
  • In dampest Dorset, on the soggy south coast.
Re: Hohner wood
« Reply #10 on: September 18, 2017, 12:41:15 PM »

Beach Bros
That's 'andy.

Thanks, looks interesting.
Logged
Dino BPII.
"Tradition is not the worship of ashes, but the preservation of fire."

tirpous

  • Hero Member
  • *****
  • Online Online
  • Posts: 1403
Re: Hohner wood
« Reply #11 on: December 01, 2017, 04:04:52 PM »

Took a while to get around to it, but I'm having fun with this !  Hopefully the new wood will blend in with staining.
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Hohner wood
« Reply #12 on: December 01, 2017, 04:19:06 PM »

Nicely done!
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

John MacKenzie (Cugiok)

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2360
  • Fettling... Learning to reed and right.
Re: Hohner wood
« Reply #13 on: December 01, 2017, 04:41:57 PM »

I don't know if I'd stain that. Try a couple of applications of varnish thinned 50/50 with white spirit, and let it dry. My guess is that a couple of coats of varnish on top of that, would match up pretty well.

What do others think?

Sir John
Logged
There is no beginning to my talent :)



: Hohner Club Modell 1. Bb/Eb, de-clubbed : Early Hohner Pressed Wood A/D : 1930's Varnished wood G/C:  Hohner Erika C/F: Bandoneon tuned D/G Pressed wood: Koch F/Bb; G/C Pre Corso

melodeon

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1732
Re: Hohner wood
« Reply #14 on: December 01, 2017, 06:14:58 PM »

Try shellac.. perhaps orange thinned out with white/clear.

Nice job.. have you backed it with anything such as a sheet of linen. ?
Logged

rees

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 5055
  • Windjammer
    • Wesson Accordions
Re: Hohner wood
« Reply #15 on: December 01, 2017, 07:38:49 PM »

Good work.
Logged
Rees Wesson (accordion builder and mechanic)
Gungrog, Welshpool, Wales, UK
www.melodeons.com

playandteach

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3526
  • Currently a music teacher in a high school.
Re: Hohner wood
« Reply #16 on: December 01, 2017, 11:55:08 PM »

What did you cut the holes with?
« Last Edit: December 03, 2017, 12:17:13 AM by playandteach »
Logged
Serafini R2D2 GC, Serafini GC accs 18 bass

tirpous

  • Hero Member
  • *****
  • Online Online
  • Posts: 1403
Re: Hohner wood
« Reply #17 on: December 02, 2017, 10:27:46 PM »

Thanks for the positive comments.

I considered reinforcing with a cloth sheet, but worried about the mess that may result around the holes if the fabric frays when I trim out the excess.  Maybe strips of 'tape' across the cracks only?  Not sure it would make a difference when an elephant comes to sit on this keyboard again (or whatever it is that collapses the face like that).  Hopefully not before another 50 years !

I roughed out the holes with a bandsaw before gluing the piece in.  Then enlarged them to size using a 3/8" dowel (around which I had glued 80-grit sandpaper) chucked in the drill-press.  A coping saw and handheld power drill or even just the dowel would have worked too.

         
Logged

rees

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 5055
  • Windjammer
    • Wesson Accordions
Re: Hohner wood
« Reply #18 on: December 03, 2017, 02:55:23 AM »

Thanks for the positive comments.

I considered reinforcing with a cloth sheet, but worried about the mess that may result around the holes if the fabric frays when I trim out the excess.  Maybe strips of 'tape' across the cracks only?  Not sure it would make a difference when an elephant comes to sit on this keyboard again (or whatever it is that collapses the face like that).  Hopefully not before another 50 years !

I roughed out the holes with a bandsaw before gluing the piece in.  Then enlarged them to size using a 3/8" dowel (around which I had glued 80-grit sandpaper) chucked in the drill-press.  A coping saw and handheld power drill or even just the dowel would have worked too.

         
The only way :)
Logged
Rees Wesson (accordion builder and mechanic)
Gungrog, Welshpool, Wales, UK
www.melodeons.com

melodeon

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1732
Re: Hohner wood
« Reply #19 on: December 03, 2017, 05:39:02 AM »

If/when you back the board with cloth... be sure to apply the fixative/glue to the button hole areas to stiffen the cloth..when it dries it shoudl be stiff.
This will aid in cutting it away cleanly.

BTW this is often done when cutting "F" holes in stringed instrument tops.
Logged
Pages: [1] 2   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal