Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Harmona Bellows  (Read 4683 times)

0 Members and 1 Guest are viewing this topic.

melodeon

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1732
Harmona Bellows
« on: August 01, 2009, 03:55:49 PM »

I recently received a German made bellows that was represented by the US seller as
" they are as good as an Italian bellows and in many ways better"

I had recently ordered and received a couple Italian bellows  so when my Harmona bellows arrived I was able to make a direct comparison


Harmona                                                                          Italian

$170  USD                                                                         $155
Unlined                                                                              Lined
Appeared to have thinner metal corners                                                              Thicker metal corners
Apperared to have thinner bellows tape                                                                Thicker bellows tape
Appeared to have thinner  leather "diamonds"                                                        Thicker leather diamonds
18 Folds ( as ordered)                                                          20 Folds
long sides bowed inward by 3mm                                            Straight as an arrow
Different lengths along the diagonal (out of square)                    Dead square
Punky bellows cardboard                                                       Stiff bellows cardboard
Generally sloppy workmanship                                                 Exacting workmanship
Do not snap back to closed position when expanded                   Rapidly snap back to original position when expanded
Thick for only 18 folds                                                           When relaxed in the compressed state with 20 folds, , thinner than the Harmona with only 18 folds

The Italian bellows appear to be made to an excellent deign with excellent materials and careful workmanship

The Harmona bellows looked cheap and poorly made reminiscant of Chinese bellows as well as bulky and not as supple and "snappy"

I would conclude that the Harmona bellows are not a good value at $170 and  I believe that considering all the above,
at $100  USD  they would be serviceable for a Hohner Erica or Pokerwork  but I would never use these on a handcrafted or
higher quality accordeon.
« Last Edit: August 25, 2009, 06:29:34 PM by melodeon »
Logged

EeeJay

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 642
  • Old Grey Paolo
Re: Harmona Bellows
« Reply #1 on: August 02, 2009, 01:17:47 AM »

Kind of stumped by this one... :-\

All the post reunification Weltmeisters/Harmonas I've seen and owned (a 'GALOTTA' branded 'C' one row door stop for a year or two) the bellows were robust, well lined with fabric, ribbed taped and properly gusseted. No bowing either. Going back further... even the bellows on my new 1981 DDR Galotta 48 bass piano box was well made, and as tough as Red Army boots... Russian reeds too...

Regards your bellows origin... Two scenarios... The dealer ordered them to be made somewhere (location debatable) recently, to a rock bottom price... and he got what he paid for. Or, perchance, they are ancient DDR era bellows the dealer has unearthed from storage (and just wants to shift)?

I'm actually wondering, though... if these bellows are actually Chinese... being 'passed off' under the Harmona name? From your description, they certainly sound like Chinese... how big are they - Corona size? Did they come labeled up/badged up?

Something odd about all this, methinks...

Ed J
« Last Edit: August 02, 2009, 01:22:11 AM by EeeJay »
Logged

melodeon

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1732
Re: Harmona Bellows
« Reply #2 on: August 02, 2009, 08:04:26 PM »

Yes there is more to the story and it's  quite disappointing and disgusting.

The seller is hiding and refuses to talk about the issue.

There was also a minor amount of damage to the ends of the bellows... some of the cardborad was bent and wrinkled.. this could be covered by a frame

What I have told you about the bellows are the facts as I see them .. the actual comparison side by side

I showed the bellows   both of them to some non concertina  non accordeon
woodworkers and crafstman/artists and asked them to give me their comments
All without exception said the  Harmona bellows were substandard  when compared with the Italian

Interesting that the seller reacted so violiently when I sent him and e mail with my descriptiion and comment that they looked Chinese.. he went absolutley ballistic..
in subseqquient e mails  I talked about responsibility when it was he who said:
"as good as and in some ways better than Itailian"....
they aren't and he has not and cannot back it up except to imply I am not qualifed to judge and he is an experienced tuner/builder  and "accordion engineer"

Who incidentally was to be listed as a vendor instrument maker for St Chartier this year
I have no idea if he was there or what he was selling

Perhaps copies of my rerto fit  keyboards for Pokerwork and Erica ( with out my permission)   but I don't know that.

I made an offer to return them for half my money back.. he refused

He is standing by   "this was a special order"   so I am stuck and according to him he has no responsibiltiy

I have "known" this person via e mail and phone calls for 2 years and this is the first actual monetary transaction I have had with him


I have played and owned Welties and Gallotas.. and the bellows were better than these

This set of bellows fits an Erica/Pokerwork/HA114  etc  but without the wood frame



« Last Edit: August 25, 2009, 06:34:17 PM by melodeon »
Logged

Andy in Vermont

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 948
  • Mélodie
    • Melodeon Minutes (blog)
Re: Harmona Bellows
« Reply #3 on: August 02, 2009, 08:24:18 PM »

Whi incidebntally was listed as a vendor instrument maker for St Chartier this year
I have no idea if he was there or what he was selling

On this list?
http://www.saintchartier.org/en/luthiers.php?PHPSESSID=d80fc62cae6f6229a2e6d0f872a804b2

I don't find any vendors from the U.S.
-Andy

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Harmona Bellows
« Reply #4 on: August 02, 2009, 09:27:21 PM »

n subseqquient e mails  I talked about responsibility when it was he woh said
.... and he is an .... "accordion engineer"

Hey Jeff, I don't know the law in the US, but I'm pretty sure that over here you can only trade as an "engineer' if you have professional qualifications and are accredited by a professional body.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Waltham

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 198
Re: Harmona Bellows
« Reply #5 on: August 02, 2009, 09:33:17 PM »

Alas no, though the Engineering Council would very much like that to be the case.
Logged

risto

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 317
Re: Harmona Bellows
« Reply #6 on: August 02, 2009, 11:06:04 PM »

Why don't you try to contact Harmona directly. At least they should confirm if they actually made those particular bellows. When I complained directly to Hohner about my accordions they never were unfriendly in any way and were interested in what I had to say about their products. Won't cost you anything and then you at least know the facts. On the other hand, if you just want to warn us about this particular dealer then you should at least give us his name. Otherwise the blame is cast over Harmona who may not even be the quilty one.
Logged
Paolo Soprani 5-row, Roland FR1B-digital CBA button accordion. Guitar, 5-string OT banjo, mandolin, piano...
My one man band recording: https://apari.fi/Bonaparte_Crossing_The_Rhine_Risto.mp3

melodeon

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1732
Re: Harmona Bellows
« Reply #7 on: August 02, 2009, 11:56:15 PM »

Andy  I don't see it either

and I must confess that information was given to me and I did not check it out

But it may have also been another festival and I simply did not hear correctly  or is was BS

So  we'll just strike that info.. as unfounded

I could not imagiine him being there as he essentially has nothing to sell except "Harmona" bellows  : )


As to Accordion Engineer....  that would be the first time I have ever heard that term...  ergo   self proclaimed

In the states you can call yourself anything you want ie
Master Mechanic
ESQUIRE  ( one of my favorites... arrogant, ignorant American lawyers.. have no clue as to what Esquire even means.. and it doesn't mean attorney and furthermore it is beyond gauche and tacky to call yourself  "esquire")

As to contacting Harmona...  I have no interest...  however I might just order a bellows from them  as I believe them to be much less expensive  .. and I am not begrudging a reseller any profit  but  obscene profits off a substandard product and not taking any repsonibilty....  
What I know is that whether from Harmona or Romania or China  these are not bellows "that are as good as and in some ways better than Italian"

and anyone with average eyesight  a pair of hands and a ruler can easily determine their quality as compared to an Italian bellows


BTW  this "accordion engineer "  also claims that he designed the Garvey AAA  starter accordion and that he was ripped off of his  original design  .....minus a grille change  
« Last Edit: August 25, 2009, 06:21:54 PM by melodeon »
Logged

Andy in Vermont

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 948
  • Mélodie
    • Melodeon Minutes (blog)
Re: Harmona Bellows
« Reply #8 on: August 03, 2009, 12:42:31 AM »

I think that there is some Belly Buick institution in the midwest (U.S.) that grants certificates for "accordion engineers" or something absurd like that.
It does sound like you have a good source of Italian bellows -- that price is cheaper than anything I've seen recently.
-Andy

melodeon

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1732
Re: Harmona Bellows
« Reply #9 on: August 03, 2009, 03:19:15 AM »

This individual  did not go through that Minnesota ( I believe)  self certification program... Red Wing I believe was the name of that outfit...

My "reliable source"  waffled and now tells me that the accordion engineer  "might have attended" St Chartier..  that is different from my first conversation.
Logged

Tit J.

  • New Starter
  • Offline Offline
  • Posts: 3
  • Laissez les bons temps rouler
    • Cajun Portal
Re: Harmona Bellows
« Reply #10 on: August 25, 2009, 03:31:07 PM »

Read your mail in "Boxbuilders" list today ...

I just have forwarded this problem to Harmona-Weltmeister here in Germany in Klingenthal (http://www.akkordeon-klingenthal.de/) to their export department - let's wait what they will say.

I for one play a Harmona Cajun accordion since many years which has a fine quality. I'm very contented.

Therefore, I think it's a case of falsification and fraud, respectively - poor Chinese bellows sold as high German quality Harmona bellows.

Best regards.
'Tit J.
Logged
Viele Grüße / Amicalement / Best regards
'Tit J. (Jürgen)

melodeon

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1732
Re: Harmona Bellows
« Reply #11 on: August 25, 2009, 05:03:40 PM »

To clarify

I did NOT say that the bellows represented as Harmona bellows were made in China  or Chinese

I said that they looked like they were made in China, or Chinese quality. ..particularly  in a comparison with the Italian bellows

These bellows were NOT   "as good as and in many ways better than Itailian bellows"
and the seller could not ,and did not ,and would not tell how they were as good as Italian bellows.. only implying I was not qualified to make that judgement and he was becasue he is
"an accordion engineer"   whatever that is


I have owned Harmona made accordions and found them to be all right.

I am not in any way disparaging HARMONA accordions

My point is that the seller of these bellows said they were one quality level  and I found them to be another. He said  they were made by HARMONA.

See my original post and description

My post on the boxbuilders was only to suggest that Italian bellows would be a better choice over HARMONA  bellows if in fact what I got were HARMONA bellows
Considering that boxbuilders is specific to making accordions, seemed an appropriate place to let builders know.


Also:

I am NOT saying the seller knowingly sold me Chinese made bellows... I do not know they are Chinese or HARMONA or Czech or Romanian..

that is not my assertion.   My assertion is that the bellows I got are not " as good as  and in many ways better than Italian bellows"   it is that simple

And  as a service to others who may be tempted to buy these bellows ( Harmona or whatever they are) .. I can only suggest that spend your money on Italian bellows, however the choice is yours.



« Last Edit: August 25, 2009, 06:35:37 PM by melodeon »
Logged
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal