Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: REtuning F/BflaT to Csharp/D.  (Read 1199 times)

0 Members and 1 Guest are viewing this topic.

richard.fleming

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 556
REtuning F/BflaT to Csharp/D.
« on: October 22, 2017, 02:11:55 PM »

Since posting this question I've heard it is pretty difficult and not worth doing so I'm happy for this post to be deleted.
« Last Edit: October 22, 2017, 02:34:08 PM by richard.fleming »
Logged
Old Paolo Sopranis in C#/D and D/D#

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: REtuning F/BflaT.
« Reply #1 on: October 22, 2017, 02:32:07 PM »

Assuming the FBb to be the low version then it is much lower in overall pitch than BC or C#D so you would need new reeds for several of the high pitch buttons. In the interests of consistency of sound and response a complete new set of reeds would be best.
But why?  FBb has a great sound and would be good for anyone wanting to play with brass or woodwind instruments. Bernard Loffet uses a box in FBb when playing with clarinetist Yves Leblanc. It’s a great combination.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

richard.fleming

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 556
Re: REtuning F/BflaT to Csharp/D.
« Reply #2 on: October 22, 2017, 02:37:04 PM »

Well it's on Ebay for a very good price and it's a highly prized Paolo model at least in ITM circles (apart from the stepped keyboard). Eleven minutes past 3 today it expires..
Logged
Old Paolo Sopranis in C#/D and D/D#

triskel

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3290
Re: REtuning F/BflaT to Csharp/D.
« Reply #3 on: October 22, 2017, 04:33:16 PM »

Well it's on Ebay for a very good price and it's a highly prized Paolo model at least in ITM circles (apart from the stepped keyboard).

I think the price it went for was cheap for anybody who actually wanted an F/Bb box, but it was only 2-voice (so generally not the most sought-after in ITM circles), and you'd want to convert it to a closed, flat keyboard (which is a pain to get right).

Mind you, I know people who regularly convert 3-voice G/C boxes to flat keyboard B/C or C#/D, in fact I've a "Pepperpot" one of them myself that wants doing...  >:E

richard.fleming

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 556
Re: REtuning F/BflaT to Csharp/D.
« Reply #4 on: October 22, 2017, 08:49:14 PM »

Out of curiosity, Stephen, how often do you come across 2-voice Paolos?
Logged
Old Paolo Sopranis in C#/D and D/D#

triskel

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3290
Re: REtuning F/BflaT to Csharp/D.
« Reply #5 on: October 22, 2017, 09:33:46 PM »

Any Paolos that turn up in Ireland are always 3- or 4-voice, and virtually all of them are 23-key.

Any 2-voice ones that I'd see were originally made for other countries, and may have had stepped keyboards when they were built.

The two I've got were both made, with flat keyboards, for the Irish-American market - though they seem to have been considered "starter models" :o there at the time! They're a 2-row D/C# made for O'Byrne DeWitt in Boston around 1949-50, and a single-row "pepperpot" made for Italian Accordion Manufacturing Co. in Chicago around 1953-4.
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal