Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1] 2   Go Down

Author Topic: Another soundboardesque question  (Read 6444 times)

0 Members and 1 Guest are viewing this topic.

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Another soundboardesque question
« on: October 27, 2017, 08:21:27 AM »

I know we have done the 'does the material of the fondo make a difference' question to death but on a similar tack I note in another thread it was opined that the material of the grille could/did change the brightness of the sound of the box. Does any one have any science to back up this opinion and if so would they care to share?

malcolmbebb

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2628
  • In dampest Dorset, on the soggy south coast.
Re: Another soundboardesque question
« Reply #1 on: October 27, 2017, 08:36:28 AM »

Widely held view in the concertina world that metal endplates - the equivalent - have a brigher sound, wooden ones softer/more mellow.

Perhaps you should grille a few concertina players?
Logged
Dino BPII.
"Tradition is not the worship of ashes, but the preservation of fire."

Graham Spencer

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3548
  • MAD as a wet Hohner........
Re: Another soundboardesque question
« Reply #2 on: October 27, 2017, 10:22:05 AM »

But is that due to the materials or to the fact that most (in my experience) metal grilles have more empty spaces than most wooden ones?

Graham
Logged
Among others, Saltarelle Pastourelle II D/G; Hohner 4-stop 1-rows in C & G; assorted Hohners; 3-voice German (?) G/C of uncertain parentage; lovely little Hlavacek 1-row Heligonka; Bâ™­/Eâ™­ Koch. Newly acquired G/C Hohner Viktoria. Also Fender Jazz bass, Telecaster, Stratocaster, Epiphone Sheraton, Charvel-Jackson 00-style acoustic guitar, Danelectro 12-string and other stuff..........

Squeezing in the Cyprus sunshine

invadm

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 613
Re: Another soundboardesque question
« Reply #3 on: October 27, 2017, 11:54:13 AM »

I know we have done the 'does the material of the fondo make a difference' question to death but on a similar tack I note in another thread it was opined that the material of the grille could/did change the brightness of the sound of the box. Does any one have any science to back up this opinion and if so would they care to share?
I am not sure if it qualify  as ''science'' but last summer i took a few poker work to Turkey and wanted to change the rusty and bent grills on 2 of them.some help from a friend with a laser cutter we made identical shape diamond wooden grills, same width/depth..as soon as I started playing we all noticed box sounded much mellow and less powerful & soft in a way,original metal grill went back on and usual poker work sound came back. a few audience witnessed and agreed it sounded different with wooden made grill and I just gave up on the wooden grill idea. Shame it did not work ,would have made a good replacement to rust old grills we all have on old Hohners. I might have to find better & thin solid wood and have another on my next trip and see how it goes..
I happen to have a 2 row Hohner with original wooden grill, if it helps I can make a sound clip for both metal and original wooden grill ,even grill off just to see if it sounds different if you like ? :||:                     
Logged

baz parkes

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1894
    • All Blacked Up
Re: Another soundboardesque question
« Reply #4 on: October 27, 2017, 12:47:50 PM »

I have a very pretty little G 1040 I purchased from Brian of this parish. She has a wooden grille, and is notably less strident than my boxes with metal grilles including a 1040 in A.

I gave up Science when I achieved a level 6 in Biology in 1969. so make of this what you will...
Logged
On the edge of Cheshire's Golden Triangle, apparently...

911377brian

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1518
Re: Another soundboardesque question
« Reply #5 on: October 27, 2017, 02:26:20 PM »

I remember both boxes with the affection boosted by hindsight...the G box I thought particularly pretty.
Logged

triskel

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3290
Re: Another soundboardesque question
« Reply #6 on: October 27, 2017, 04:32:07 PM »

Like I said earlier today, in a parallel universe...  :o

I like the sound that aluminium grilles give to a box the best, which is why I own three vintage Paolo Soprani ones like that.

For that matter, my Casali 4-voice, along with the Delfini I got recently, have aluminium grilles, as the Fipaccordion would have done too - and I'll be replacing the latter's missing one as soon as I can get an aluminium grille to suit it.

baz parkes

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1894
    • All Blacked Up
Re: Another soundboardesque question
« Reply #7 on: October 27, 2017, 04:57:53 PM »

I remember both boxes with the affection boosted by hindsight...the G box I thought particularly pretty.
As prettiness goes she's probably the jewel in my collection...plays beautifully too...
Logged
On the edge of Cheshire's Golden Triangle, apparently...

Winston Smith

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4066
  • AKA Edward Jennings
    • "Our Luxor B&B" Luxor life, slice by slice.
Re: Another soundboardesque question
« Reply #8 on: October 27, 2017, 05:22:48 PM »

"probably the jewel in my collection.."

Might we be allowed to drool over a picture?
Logged
At last, broken and resigned to accept conformity.
Oh, how I LOVE Big Brother!

Rob2Hook

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2278
  • Castagnaris, Hohners & Baffetti
Re: Another soundboardesque question
« Reply #9 on: October 28, 2017, 04:45:03 PM »

I wonder if the perceived brighter tone from a metal grille is the reasoning behind the way curved grilles are made from pierced aluminium sheet and then veneered with wood?  Of course, it may have come from the fact that the metal substrate stops the grille from cracking, which it probably would if just wood were used...

I have had a couple of rather dull sounding boxes with wooden grilles.  If I had access to a laser or water cutter, I'd love to make replacement brass ones but I'm too lazy to do it by hand!

Rob.
Logged

Chris Rayner

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 467
Re: Another soundboardesque question
« Reply #10 on: October 28, 2017, 05:33:49 PM »

I think that wood versus metal parts in musical instruments are bound to contrast.  The wooden instrument being better damped by the fibrous nature of the material.  Xylophones are generally wooden, whereas if made from metal the sound is quite different.  I’m sure an expert turner could make a wooden bell, but I’m not sure it’d ring well.  The extent to which this will affect a melodeon’s sound is probably best discovered by experiment.
Logged
Elderly amateur musician hoping to stave off dementia by learning to play the melodeon.  Main instrument a Tommy, also D/G and G/C pokerworks,  a single row 2 stop Hohner, and a new addition to the free reedery, a rather splendid Paolo Soprani four voice 120 bass c-system chromatic button accordion.  Very shiny, very loud, and about the same size and weight as a small car.  Now I’ve traded me Benny with (ahem) a cash adjustment, to a three voice 60 bass Castagnari K3.

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Another soundboardesque question
« Reply #11 on: October 28, 2017, 06:39:07 PM »

That’s rather confused.  The wood used for a xylophone does ring,  that’s why the bars can be tuned.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

melodeon

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1732
Re: Another soundboardesque question
« Reply #12 on: October 28, 2017, 09:07:16 PM »

The principal wood used in xylophones and marimbas is dalbergia stevensonii  aka Honduras Rosewood .. most of which comes from Belize. I was there contacting rural mills and cutters. It is used because it does sound "metallic" when struck.  I brokered the stuff for many years, still have a bit of it left. 

However, without the tubes/sound chambers below them, very little can be heard.  The tube lengths are critical.

The tone bars are tuned on the underside as well as the sides.  The bars are suspended by means of cords or springs.



FYI
Logged

Chris Rayner

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 467
Re: Another soundboardesque question
« Reply #13 on: October 28, 2017, 10:00:27 PM »

That’s rather confused.  The wood used for a xylophone does ring,  that’s why the bars can be tuned.

Of course it rings.  Where did I say it doesn’t? 

However there is a distinct difference in sound between a xylophone with wooden bars and a metal instrument.  Also compare the sound of a wooden guitar with steel strings, one with nylon or gut strings, and one of the various instruments either wood with steel resonator, often called dobro, or an entirely steel resonator guitar.  The differences are instantly recognisable.  Materials will influence the sound an instrument makes.  It’s physics.
Logged
Elderly amateur musician hoping to stave off dementia by learning to play the melodeon.  Main instrument a Tommy, also D/G and G/C pokerworks,  a single row 2 stop Hohner, and a new addition to the free reedery, a rather splendid Paolo Soprani four voice 120 bass c-system chromatic button accordion.  Very shiny, very loud, and about the same size and weight as a small car.  Now I’ve traded me Benny with (ahem) a cash adjustment, to a three voice 60 bass Castagnari K3.

Tone Dumb Greg

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4955
    • Dartmoor Border Morris
Re: Another soundboardesque question
« Reply #14 on: October 28, 2017, 10:50:13 PM »

I suppose this was the same series of comments that said you can brighten the sound of an instrument with a wooden grill by removing it. Does this apply to metal grills as well? Is it a good idea to do it? Would it be better to replace it with a metal grill than remove it? Do the men that make them know how they make them?
Logged
Greg Smith
DG/GC Pokerwork, DG 2.4 Saltarelle, pre-war CF Hohner, Hohner 1040 Vienna style, old  BbEb Hohner that needs a lot of work.

ACCORDION, n. An instrument in harmony with the sentiments of an assassin. Ambrose Bierce

Anahata

  • This mind intentionally left blank
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 6767
  • Oakwood D/G, C/F Club, 1-rows in C,D,G
    • Treewind Music
Re: Another soundboardesque question
« Reply #15 on: October 28, 2017, 10:58:29 PM »

Materials will influence the sound an instrument makes.  It’s physics.

While that's true, it's also true that the amount of that that influence varies, depending on how much the part in question is part of the sound production process on a particular instrument.

In most instruments the mechanical vibration of a solid object is transmitted to the air, and the parts that transmit that  vibration have a major influence on the sound. In a guitar, vibration from the string is transmitted to the body, and then from the body to the air as sound, so they all make a big difference. In a melodeon, the reeds chop the air flow creating a high level of sound in the air. There is very little transmission of that sound to the solid parts like the case and grille, or back to the air from them. The sound is filtered by the shapes and size of the air path (resonant chambers, high frequency absorption etc.) but not by what solids surround those cavities.

A grille can absorb high frequency sound if it's wood, less so if it's metal, and block a little sound. The absorption's a property of the surface hardness, not of how it vibrates.
Logged
Слава Україні !
Music recording and web hosting: www.treewind.co.uk
Mary Humphreys and Anahata: www.maryanahata.co.uk
Ceilidh band: www.barleycoteband.co.uk

Rog

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2525
  • Repair and tuning in Hants
Re: Another soundboardesque question
« Reply #16 on: October 29, 2017, 09:05:22 AM »

I wonder if the perceived brighter tone from a metal grille is the reasoning behind the way curved grilles are made from pierced aluminium sheet and then veneered with wood?  Of course, it may have come from the fact that the metal substrate stops the grille from cracking, which it probably would if just wood were used...

I have had a couple of rather dull sounding boxes with wooden grilles.  If I had access to a laser or water cutter, I'd love to make replacement brass ones but I'm too lazy to do it by hand!

Rob.

I agree with Anahata...Rob, maybe you should try cutting some metal strips/drill a few holes and lining the inside of the wooden grille...not completely but, say, near the keyboard where the lower row of reeds are often more muffled than the set further away from the KB, or..., positioning a metal baffle on the inside of the grille to see what effect it has (and you could move it around). And then report back to us here with your findings. (;)

Rob2Hook

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2278
  • Castagnaris, Hohners & Baffetti
Re: Another soundboardesque question
« Reply #17 on: October 29, 2017, 10:57:02 AM »

Rog,

Did you miss the bit about my being too lazy...?

Rob.
Logged

Winston Smith

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4066
  • AKA Edward Jennings
    • "Our Luxor B&B" Luxor life, slice by slice.
Re: Another soundboardesque question
« Reply #18 on: October 29, 2017, 12:56:21 PM »

"The sound is filtered by the shapes and size of the air path (resonant chambers, high frequency absorption etc.) but not by what solids surround those cavities."

I've been pondering these wise words, and came to wonder if "air pathways" are all that's involved. I've recently been playing at converting a 1-row in G to 4th button start, inspired by Mr Anahata's G Scale thingy, and making a 4 bass spoon left-hand side fit onto a set of bellows from yet another instrument. During this enterprise, I had a lot of re-tuning of the three banks of treble reeds to accomplish, and ended up "twanging" them over the bellows (which were held in my un-patented tuning device) for speed. I found that holding the reedplate between my fingers soon became rather painful, as I had to squeeze my finger and thumb together until the flesh was compressed against the bone before I could get anything like a proper sound out of the twanged reed. The reed response (sound) was much better when I pressed the plate against the bellows frame which was, of course, harder than my finger. The only possible influence from air pathways/chambers/whatever was the gaping maw of the hanging bellows, which also had my wrists leaning on one side whilst my hands were stretched over the opening to work the reeds on the other side. (If you can picture it?)
It seems to me that the solidness of mounting is just as important where the operation (and particularly the volume) of the reeds is concerned. Perhaps we could learn more from the American owner of the "Hohner Ironclad" which has been advertised for sale on eBay for a couple of years?
Logged
At last, broken and resigned to accept conformity.
Oh, how I LOVE Big Brother!

Anahata

  • This mind intentionally left blank
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 6767
  • Oakwood D/G, C/F Club, 1-rows in C,D,G
    • Treewind Music
Re: Another soundboardesque question
« Reply #19 on: October 29, 2017, 05:13:15 PM »

It seems to me that the solidness of mounting is just as important where the operation (and particularly the volume) of the reeds is concerned.

It certainly is. This has been discussed before, especially in the context of those little metal straps that sometimes tie the reed blocks together when there is more than one reed block. In that case the strap creates extra stiffness to help prevent the vibration of one reed affecting another by transmission though the solid (but slightly springy) block, a problem which might only affect a couple of notes but makes a very distracting warble when it happens. The possibility of metal reed blocks, again to make them stiffer, has also been discussed elsewhere on melnet.

But the anchorage of the reed is, acoustically and mechanically, a very different place from the open air where the grille is (which is where this sub-thread started...)

Also the twang of a plucked reed is a very different sound-making mechanism from what happens when there is airflow though the slot, and that airflow being chopped by the reed's vibration.
Logged
Слава Україні !
Music recording and web hosting: www.treewind.co.uk
Mary Humphreys and Anahata: www.maryanahata.co.uk
Ceilidh band: www.barleycoteband.co.uk
Pages: [1] 2   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal