Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Hohner Honey Presswood ..  (Read 4138 times)

0 Members and 1 Guest are viewing this topic.

melodeon

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1732
Hohner Honey Presswood ..
« on: August 03, 2009, 11:38:20 PM »

Just got a late 40's early  50's  Pokerwork with the honey colored embossed finish  I have had a couple of these before

This one is in excellent original condition with clean reeds, straight leathers and still pliable wax...
Key system is C/F
A bit of surface rust on the grille.
Needs Bellows straps but the bellows are in excellent condition.
Inside  clean as a whistle and a virgin.... beautiful reed blocks with H reeds
Plays well and  tuning remarkably good
Actually appears to have been a rarely played or unplayed accordion..
perhaps played once and  someones wife/girlfriend/husband/boyfriend  objected   ...see the following paragraph
HOWEVER

On the front of the box on the case work on the right side where the large Hohner name and emblem is pressed in.. there is a hideous burn mark that has charred into the wood by over an 1/8th of an inch  about 2 to 2 1/2 mm   deep and aboput 1 1/2 inches wide by 2 1/2 inches long, actually looks like someone took a torch to it.  this is a real shame... on an otherwise outstanding accordion.  nThe rest of the box is near original.

There is no way to sand or scrape it down... too large too deep

I suppose I could disassemble and de glue and flip the frame around  reversing the front and rear panels to put the burn on the back.. but it would  still  be there

I could also simply  cut into this section and laminate a piece of wood over  the burned part
or... cut a fascia piece the full size of the front panel as a dutchman and cover the whole front  with a solid piece of Alder.. the original wood..

Or  dig it out.. putty it in or fit a piece and paint it black
or leave it  and wait to see if in my life time I could find another honey presswood box as a donor

Perhaps just leave it as an example of my oh so hot playing

Anyone have a right side for a Hohner Pokerwork honey presswood box ???

An advice or opinions on what should be done with this unit?

Plays well and could be a parts donor itself  or a great conversion box to another key system without regard for originality and cosmetics

Let me know what you think

BTW  paid $100 for it.


Logged

TomB-R

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 598
Re: Hohner Honey Presswood ..
« Reply #1 on: August 04, 2009, 12:03:35 AM »

Although I have one here that sounds to be similar, it has high sentimental value to its owner and is awaiting refurbishment and return. Sorry!

Is yours the one with Hohner Accordeon in a shield design so that the writing is right way up when the box is being played?

Any chance of inlaying a piece and matching the design reasonably well? It would be very hard to hide this enough, but if the one I've got does match and an image of the undamaged design would help, let me know.

Make it look less hideous by inlaying a piece with a reasonable colour match neatly to clear the damage, but not try to match the design?
Logged

RGF

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 214
Re: Hohner Honey Presswood ..
« Reply #2 on: August 04, 2009, 12:12:42 AM »

Is the damage situated such that you could remove the burnt area and fill it in with, say, a little oval or rectangular frame with an appropriate photo, as I seem to recall having seen on some old Italian boxes?  Or covered with a decorative filligree, as you see on some of Stormy Hydes lovely instruments, a Texas Rose or Tristan Glover kind of design?

Bob
Logged

melodeon

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1732
Re: Hohner Honey Presswood ..
« Reply #3 on: August 04, 2009, 04:50:06 AM »

This damage is charred I mean actual black charcoal....  bizarre

Filligree... roses...  thanks,   but  not likely,,, I do "manly"  accordeons : )

As I am a cabinet maker.. ( not the American kitchen cabinet  designation we think of as cabinet maker)  but a furniture maker as in casework  etc
not much I can't do...  but this is tricky

The Honey finish is a real trick
Pressed in design along with an impregnated color....

I suppose I could graft a piece in..  due to its location this would involve the lip of the wood on the grille side... making it necessary to do a bit of dismantling,  perhaps carve the design..


It's a puzzlement   but meantime this is a fine little box....
Logged

RGF

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 214
Re: Hohner Honey Presswood ..
« Reply #4 on: August 04, 2009, 05:22:14 AM »

Well, then........how about a "Thor's Hammer" like I carved for the soundhole on my kantele? Can't get any more manly than that!

Good luck with your repair!

Bob
Logged

triskel

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3290
Re: Hohner Honey Presswood ..
« Reply #5 on: August 04, 2009, 06:35:30 AM »

Just got a late 40's early  50's  Pokerwork with the honey colored embossed finish  I have had a couple of these before

.... beautiful reed blocks with H reeds

Jeff,

If they're all H reeds, it could even be from the '30s (like the one I've got here). The tell-tale seems to be if it has these (pre-war) kind of feet on the bass end:


The Honey finish is a real trick
Pressed in design along with an impregnated color....

Or is the "pokerwork" actually burnt into the wood on these, I wonder?

Anyway, if it was mine I'd be tempted to "make a feature of it" and insert a carved panel, or a BMW badge, or something, to hide it. Unless I could find a junker...

melodeon

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1732
Re: Hohner Honey Presswood ..
« Reply #6 on: August 04, 2009, 05:34:49 PM »

The "feet" are a simple domed  chromed button   a hemisphere  about 7 /16ths "  or  12mm

I belueve that the way that the emossing was done was with a roller  under pressure feed..  or a die and a press.. no "burning

I think that I will incise the area and relieve a cavity about 3  mmm ( 1/8th ")   deep  tryiing to retain what is left of the word Hohner   and make an insert of the same wood.. alder    ....  and perhaps try to replicate the pattern withnchisel anf file

If that doesnt work  perhaps  a buit opf barass with something appropriate

On the 1880's 2 1.2 row owned by my great grandfather  he did some very clever repairs which included a very cool recycled brass sheet   this is a must see



On the Pokerwork

I cleaned up the corners and grille.. they look very good

I managed to find in my parts stash an appropriate "period" and properly worn but serviceable bellows strap..

All opf the button look new and absolutely no fingerboard or bass button area wear..   
Minor   very minor scuffing on a the bellows tape... easily remedied

The inner folds of the bellows are lime grreen and the tape is brown.....

I am thinking I may change all the straps to a medium brown color.

And possibly build one of my retro fingerboards replete with thumb groove...

Fun box... and deserves to live again.

I played it a bit this morning and it is in remarkable tune and sounds very good.  I have owned a couple C/F boxes and at the time thiought that they were not so good.. I have changed my mind.. it is a fine key system.  very "bluesy"
Logged

HallelujahAl

  • Guest
Re: Hohner Honey Presswood ..
« Reply #7 on: August 04, 2009, 05:46:11 PM »

Quote
I played it a bit this morning and it is in remarkable tune and sounds very good.  I have owned a couple C/F boxes and at the time thiought that they were not so good.. I have changed my mind.. it is a fine key system.  very "bluesy"

Sounds an interesting project - any chance you'd be able to whack some photos up and let us se what and how you're doing it?
AL
btw I don't know how I'd do without my old Erica C/F - it's just brilliant!
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Hohner Honey Presswood ..
« Reply #8 on: August 04, 2009, 06:23:18 PM »



On the 1880's 2 1.2 row owned by my great grandfather  he did some very clever repairs which included a very cool recycled brass sheet   this is a must see


My son has a Lachenal concertina of similar age.  In the distant past someone has carefully repaired some fretwork damage with a small silver panel let in to the wood.   The silver still has some decorative engraving on it from a previous existence, perhaps it was once part of a teapot?
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

triskel

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3290
Re: Hohner Honey Presswood ..
« Reply #9 on: August 05, 2009, 02:24:05 AM »

The "feet" are a simple domed  chromed button   a hemisphere  about 7 /16ths "  or  12mm

Then I guess it is a post-war one then.

Quote
The inner folds of the bellows are lime grreen and the tape is brown.....

Though that'd be the same as my pre-war one.

Quote
I belueve that the way that the emossing was done was with a roller  under pressure feed..  or a die and a press.. no "burning

Well Koch, who seem to have originated the style before Hohner took them over, actually called them "Burnt-Wood" Accordions in their catalogues, and  Hohner's "Poker Work" is only another name for that...

Quote
I am thinking I may change all the straps to a medium brown color.

That'd be like the original ones, from the late '20s/early '30s. I have those too, and it looks well.

Quote
I think that I will incise the area and relieve a cavity about 3  mmm ( 1/8th ")   deep  tryiing to retain what is left of the word Hohner   and make an insert of the same wood.. alder    ....  and perhaps try to replicate the pattern withnchisel anf file

If it's any help, the design is in my attachment, below.

stevejay

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 709
Re: Hohner Honey Presswood ..
« Reply #10 on: August 11, 2009, 04:07:43 AM »

This is just like mine. I'm waiting for it in the mail, it went out for repairs. $100 was a good bargain, what about the sound, does it need a tuning ? The burn is almost inconsequential imo if it already plays well. Spend the time on felts or something (:)
Logged

melodeon

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1732
Re: Hohner Honey Presswood ..
« Reply #11 on: August 11, 2009, 11:14:46 PM »

Thanks Stephen  that's the same  logo

The burn is from the arc above "HOHNER"  to within 1/2 inch from the metal corner
from the right hand center bar  vertical design bit to about 1/4 inch from the left side of your photo

There are a couple reeds that are only slightly out  and I think  a flic or two and some playing will egt them close

A few of the original leathers need to be recurled but the are soft and supple

The wax is still soft
No corrosion or  rust on the reeds

The grille cloth on the base side was all but gone so I scraped it off and replaced it.. looks as good as new.

I fluffed up the yarn bellows gasket with a bit of bamboo BBQ  skewer 
I padded the keyboard with cork sheeting... works very well

I also noted that a few of the bass reeds are  "T" reeds while all of the treble reeds and a couple bass reeds are "H" reeds
typical of just post war.  All the bass reeds and leathers look new

What is left is to replace the thumb strap.. which I rareley use and put on some strap bracket...

I have a plan for repairing that burned area... least amount of open heart surgery with a very good chance of survival

This is the ideal busking box.  Sounds very good and a bit battered so should get some sympathy tips
Logged

tedrick

  • Guest
Re: Hohner Honey Presswood ..
« Reply #12 on: March 18, 2010, 04:16:40 PM »

pics of my presswood:

mine is a G/C -

http://picasaweb.google.com/reed.munson/HohnerShots#

from the looks of it this little guy still has its all original wax valves and reeds -
as you can see the valves are in pretty bad shape and the bellows are not that great -
Logged
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal