Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: reeds, different shapes  (Read 1588 times)

0 Members and 1 Guest are viewing this topic.

blafleur

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 530
reeds, different shapes
« on: November 02, 2017, 12:58:16 PM »

Speaking of reeds, I got to wondering about shapes.  Many of the older reeds had parallel sides, now all new reesd I know of other than Harmonikas Dix are tapered.  I had heard many older Cajun players where I grew up wishing Binci still made parallel reeds because they said they liked the sound better.  Anyone know why they taper the reeds now?  Does that make for better response?  Seems to me it might make for more stable pitch in different pressure ranges, but just speculating.

John MacKenzie (Cugiok)

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2360
  • Fettling... Learning to reed and right.
Re: reeds, different shapes
« Reply #1 on: November 02, 2017, 01:17:59 PM »

Another thought that occurs is, that maybe the less metal you have flexing back and forth at free end of a reed, the less likelihood of metal fatigue at the fixed end. It should also come to rest quicker, lessening any attenuation of the note.

SJ
Logged
There is no beginning to my talent :)



: Hohner Club Modell 1. Bb/Eb, de-clubbed : Early Hohner Pressed Wood A/D : 1930's Varnished wood G/C:  Hohner Erika C/F: Bandoneon tuned D/G Pressed wood: Koch F/Bb; G/C Pre Corso

JohannPascher

  • Good talker
  • **
  • Offline Offline
  • Posts: 55
Re: reeds, different shapes
« Reply #2 on: November 02, 2017, 03:44:14 PM »

Anyone know why they taper the reeds now?  Does that make for better response?  Seems to me it might make for more stable pitch in different pressure ranges, but just speculating.
The only reason i know is because with tapered reeds the person that is riveting the reed can adjust the precision easy by moving the tongue toward the tip and file the tip so one gets the wanted precision. On the other hand small tips lead to less maximum Volume and do speak a little bit eraser. I have seen old patents with reeds tapered the other way round. I also believe it effects the overtone spectrum as well. But as with all influences the are never easy to notice. and more difficult to prove.
Logged

Kimric Smythe

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 712
    • Smythe's Accordion Center
Re: reeds, different shapes
« Reply #3 on: November 07, 2017, 07:46:28 AM »

Having worked on bandoneons that have parallel reeds , the tapered reeds might be due to the tips having to be very thin and prone to damage on higher pitched reeds. tapering the reed lowers tip weight without having to reduce the thickness much.
Logged
Smythe's Accordion Center
Pinole, California
Sales and repairs since 1997

JohannPascher

  • Good talker
  • **
  • Offline Offline
  • Posts: 55
Re: reeds, different shapes
« Reply #4 on: November 07, 2017, 08:19:45 AM »

Having worked on bandoneons that have parallel reeds , the tapered reeds might be due to the tips having to be very thin and prone to damage on higher pitched reeds. tapering the reed lowers tip weight without having to reduce the thickness much.

Have a look at the Italian piccolo reeds the are tapered and with quite small width. Sure it contributes in the way you suggest. There is also no real reason to get to higher pitch in this way because the main pitch adjustment is done by the length of the tongue. But the main reason is to be able adjust the fitting. Also keep in mid if width is enlarged or lowered on parallel reeds by keeping other dimension the same the pitch is not changed, only the amount of output changes. I have seen or worked old reeds with up to three times more width on similar pitched reeds as the are usual today, and the worked great. So all in all the resulting effect is minimal if one can compare a tapered and a parallel piccolo reeds with the same pitch. As for a matter of taste i prefer the sound of parallel reeds on lower pitched reeds.
« Last Edit: November 07, 2017, 08:23:39 AM by JohannPascher »
Logged

JohannPascher

  • Good talker
  • **
  • Offline Offline
  • Posts: 55
Re: reeds, different shapes
« Reply #5 on: November 07, 2017, 08:38:38 AM »

Another thought that occurs is, that maybe the less metal you have flexing back and forth at free end of a reed, the less likelihood of metal fatigue at the fixed end. It should also come to rest quicker, lessening any attenuation of the note.

SJ
As we all know low reed respond less fast as piccolo, but how much difference would be in nearly the same size pitched reeds? And believe me as a matter of experience nearly all the time the reason way a reed is not as fast as one wants it there is some other reason. Most of the time with piccolo reeds it is a question of miss match in resonance reed pitch to chamber or the reed is not set correctly. Sure there are other important criteria but tip width is of no concern for me if it comes to response metal fatigue.
Logged

blafleur

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 530
Re: reeds, different shapes
« Reply #6 on: November 07, 2017, 12:17:28 PM »


As for a matter of taste i prefer the sound of parallel reeds on lower pitched reeds.

Same here, and is the reason I was wondering why parallel reeds are so rare now.
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal