Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Pokerwork questions  (Read 1366 times)

0 Members and 1 Guest are viewing this topic.

Jesse Smith

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 761
  • Buffalo, NY, USA
Pokerwork questions
« on: November 14, 2017, 07:23:15 PM »

A couple of questions about my newly acquired Hohner Pokerwork...

When I play the bass buttons I get a weird buzzing or resonance that lingers after the actual note stops sounding (almost like a spring vibrating). What's this likely to be coming from, the valves? (I know it's hard to diagnose from text but I thought perhaps it's a common enough symptom to be recognizable. It's most noticeable on the C and G bass buttons, less so on the chords and even less on the upper B and D buttons.

A question for my own curiousity: how is the keyboard attached to the box? I am pretty sure I have a post-70s box with a replacement keyboard salvaged from a pre-60s box (it's a lyre shaped wooden keyboard). It's hard to see by looking at it how the keyboard was replaced. How do you get the buttons out?

I am enjoying this melodeon - 10 days in and I can just about lurch through Frère Jacques with bass accompaniment. I'll be quite excited to be able to play through it smoothly.
Logged
Hohner Pokerwork D/G (x2!), Hohner one row four stops in D and C, Hohner Presswood C/F.

Phil Howard

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 135
    • Red Cuthbert Morris
Re: Pokerwork questions
« Reply #1 on: November 14, 2017, 07:37:28 PM »

Here’s how the keyboard comes off (and how to fit one of Pete’s nice wooden keyboards): http://wiglaf.co.uk/blog/en/music-and-morris/16-a-fit-of-fettling
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Pokerwork questions
« Reply #2 on: November 14, 2017, 07:48:03 PM »

A couple of questions about my newly acquired Hohner Pokerwork...

When I play the bass buttons I get a weird buzzing or resonance that lingers after the actual note stops sounding (almost like a spring vibrating).

It is the low bass reeds continuing to vibrate after you have released the button.  The reed tonge is a strip of spring steel, so it’s a nice observation to say  that it sounds like a spring vibrating.  It’s perfectly normal, and not something that needs to be fixed.  In normal play it’s not usually noticeable.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: Pokerwork questions
« Reply #3 on: November 14, 2017, 07:50:57 PM »

A couple of questions about my newly acquired Hohner Pokerwork...

When I play the bass buttons I get a weird buzzing or resonance that lingers after the actual note stops sounding (almost like a spring vibrating). What's this likely to be coming from, the valves? (I know it's hard to diagnose from text but I thought perhaps it's a common enough symptom to be recognizable. It's most noticeable on the C and G bass buttons, less so on the chords and even less on the upper B and D buttons.

The bass reeds are large and some have large too weights added as well, so when you stop the air flow and this the note sounding the reed continues to vibrate and that is what you can hear. Fortunately any one else listening is unlikely to hear it.

Quote
A question for my own curiousity: how is the keyboard attached to the box? I am pretty sure I have a post-70s box with a replacement keyboard salvaged from a pre-60s box (it's a lyre shaped wooden keyboard). It's hard to see by looking at it how the keyboard was replaced. How do you get the buttons out?

I am enjoying this melodeon - 10 days in and I can just about lurch through Frère Jacques with bass accompaniment. I'll be quite excited to be able to play through it smoothly.

The keyboard is held on by two screws from the inside of the casework, if you do remove the keyboard be very careful when refitting it that you do not cross thread the screws as they are made of cheese and will share off causing all sorts of problems.

Jesse Smith

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 761
  • Buffalo, NY, USA
Re: Pokerwork questions
« Reply #4 on: November 15, 2017, 04:34:36 PM »

Thank you! It's good to know the lingering vibration is normal and expected. I worked some more on Frère Jacques and Egan's Polka with both hands this morning and you're right that it's not very noticeable in actual play, especially if keeping the bass and chords short and punchy. (Now I need to get the knack of playing the left hand staccato while not forgetting to keep the bellows moving so the melody note continues to sound.)

I also get some noises on the lower treble reeds when reversing bellows direction. Almost of "mouth noise" sort of thing. I assume that is the valves. Is that normal on a Pokerwork? This too is not very noticeable on faster tunes, but maybe more so on a slower tune like Silent Night.
Logged
Hohner Pokerwork D/G (x2!), Hohner one row four stops in D and C, Hohner Presswood C/F.

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: Pokerwork questions
« Reply #5 on: November 15, 2017, 06:49:01 PM »

I also get some noises on the lower treble reeds when reversing bellows direction. Almost of "mouth noise" sort of thing. I assume that is the valves. Is that normal on a Pokerwork? This too is not very noticeable on faster tunes, but maybe more so on a slower tune like Silent Night.
Yes - that is almost certainly the valves. They can make that raspy sound on a bellows direction change, especially if the valves are made of vinyl and/or if they are slightly curled and not sitting flat on the reed plate. The lower notes are more prone to it than the higher notes. It can get annoying for the player.

The solution is to (a) check that the valves are in good condition and sitting nice and flat on the reed plate, and (b) the longer valves on the 4 or 5 lowest-pitched reed plates could advantageously be replaced by leather valves, often with a thin steel spring attached using a small fabric disk. They are much quieter than vinyl valves. You can get synthetic leather valves which are good, but the real thing is best.
Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal