Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1] 2   Go Down

Author Topic: Tip for restoring dull pearloid buttons  (Read 4084 times)

0 Members and 1 Guest are viewing this topic.

squeezy

  • Quick starter (now lagging behind)
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1317
  • Hohner Cornelia (mixte D/G/o&s)
    • www.johnspiers.co.uk
Tip for restoring dull pearloid buttons
« on: November 14, 2017, 10:18:10 PM »

Old boxes normally have dull buttons, sometimes with quite a lot of pitting which also picks up dirt.  Not only do they look a bit rough, they also hamper some of the faster playing techniques.  After years of faffing around with things like T-cut and brasso to try and get buttons on old Hohners to take on a nice shine, I've finally found something which does the job quickly and easily without the mess.

Well - they sell these funny little 4 sided cushioned things in the chemist for making your fingernails (fake or real) nice and shiny and they just happen to also do the same thing to pearloid buttons (and it will actually buff up pearloid bodywork nicely too). 



After disassembling the keyboard as much as I could, I worked it over all of the buttons at the same time,  the cushioned nature of the block means it follows the curved profile of the buttons to some degree.  The sides are numbered 1-4 in order of fineness, and once you get to number 4 the buttons are noticably shiny and feel great to play!
Logged
Squeezy

Sometimes wrong, sometimes right ... but always certain!

rees

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 5055
  • Windjammer
    • Wesson Accordions
Re: Tip for restoring dull pearloid buttons
« Reply #1 on: November 14, 2017, 11:13:14 PM »

Wow, top tip of the month, I reckon! I shall be off to the apothecary tomorrow.
Logged
Rees Wesson (accordion builder and mechanic)
Gungrog, Welshpool, Wales, UK
www.melodeons.com

squeezy

  • Quick starter (now lagging behind)
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1317
  • Hohner Cornelia (mixte D/G/o&s)
    • www.johnspiers.co.uk
Re: Tip for restoring dull pearloid buttons
« Reply #2 on: November 14, 2017, 11:19:02 PM »

 ;)

It's not perfect ... if there's pitting and build up on the sides of the buttons it's too wide to get in between them ... but for a nice top surface I did the whole keyboard in about 15 minutes ... I ruined the block mind you!
« Last Edit: November 14, 2017, 11:20:49 PM by squeezy »
Logged
Squeezy

Sometimes wrong, sometimes right ... but always certain!

NickF

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 177
Re: Tip for restoring dull pearloid buttons
« Reply #3 on: November 15, 2017, 07:48:24 AM »

Amazon sell (shocker!) something very similar - about a quid each IIRC...
Logged
Serenellini 233, Streb, D/G Pokerwork, D/G Liliput, Bb/Eb Liliput, Bb/Eb Comedy Wardrobe (Hohner Model X), Bb/Eb Accidental Erika

If you can smile when things are going wrong, you must have someone else in mind to blame

squeezy

  • Quick starter (now lagging behind)
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1317
  • Hohner Cornelia (mixte D/G/o&s)
    • www.johnspiers.co.uk
Re: Tip for restoring dull pearloid buttons
« Reply #4 on: November 15, 2017, 08:43:14 AM »

Yeah - they're normally between £2 and £4 each if you get them from the high street - but I'm sure the people in "nail bars" don't pay that much for them - there's bound to be a wholesaler somewhere - I don't know if the different ones out there are of different qualities - I think mine came from Boots - I nicked it from our bathroom.

There's a lot out there for doing up fake nails and nail extensions - they're just a very hard plastic so these products should all be suitable for box parts too.
Logged
Squeezy

Sometimes wrong, sometimes right ... but always certain!

ChrisLDD

  • Good talker
  • **
  • Offline Offline
  • Posts: 64
  • ... but which way is up?
Re: Tip for restoring dull pearloid buttons
« Reply #5 on: November 15, 2017, 09:36:46 AM »

... and I guess that pretty soon we'll all have really nice nails ;)
Logged
Trying to learn enough magic to make my own melodeon.

Rog

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2525
  • Repair and tuning in Hants
Re: Tip for restoring dull pearloid buttons
« Reply #6 on: November 15, 2017, 10:06:58 AM »

squeezy

  • Quick starter (now lagging behind)
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1317
  • Hohner Cornelia (mixte D/G/o&s)
    • www.johnspiers.co.uk
Re: Tip for restoring dull pearloid buttons
« Reply #7 on: November 15, 2017, 10:12:17 AM »

Yeah - that's the ones - they're great for doing the surface of the buttons even if the buttons have quite a curve on them because the foam is flexible.  I took the fingerboard plate off and did all the buttons at the same time, trying to get in to all the nooks and crannies.  After about 15 minutes and using all 4 sides in order the only bits of the buttons that were not shiny and like new were the vertical sides to the buttons ... I'm just looking to see if you can get similar things that are thinner and 2 sided for doing the sides of the as well - it looks like they exist.
Logged
Squeezy

Sometimes wrong, sometimes right ... but always certain!

robotmay

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 820
Re: Tip for restoring dull pearloid buttons
« Reply #8 on: November 15, 2017, 10:30:30 AM »

I have some fine abrasive pads that might work for getting between buttons. I use them for polishing wood, and they're washable/reusable!
http://www.axminster.co.uk/micro-mesh-soft-touch-pad-abrasives-211364

You get a very nice finish if you work your way up through the grit levels.
Logged

invadm

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 613
Re: Tip for restoring dull pearloid buttons
« Reply #9 on: November 15, 2017, 12:09:24 PM »

for cleaning dirt and stain on the buttons I use this; it works fast and well too.
  https://www.waitrose.com/ecom/products/flash-magic-eraser-extra-power/890065-577352-577353
Logged

Gena Crisman

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1108
  • 🇬🇧
Re: Tip for restoring dull pearloid buttons
« Reply #10 on: November 15, 2017, 01:16:03 PM »

A little bit left field here, but from someone with the experience of using these for their nails;

Sometimes, these multi way files/blocks have a fairly course grit on them to start (ala a standard emery board) and sometimes they do not. So, please be aware (even if it's a technique you've used before) that they are not all made equal, and you may want to exercise some caution when starting with the first step, just in case they take off a bit more than you expect.

I've been able to get these in a vaguely foamy nail-file-esque stick form from the high street too (google '3 way nail buffer' instead of 4 way; should net you some examples) which I always preferred to the more cumbersome blocks. You could probably do the in between parts with one of those, if you wish to stick to this theme. As you've noted, the foamy-ness helps stop you from putting too much pressure on just one part of your curved nails tops (and doing a real number on yourself) and that presumably translates well to the curved button edges.

Micromesh is, to my understanding, pretty good for a lot of workshop type tasks, although you may not trip over it on a trip to boots, and I guess it might not be rigid enough for all purposes, but would get you a graded finish that you might not be able to get with melamine foam.

Oh and a final note, not that you would probably ever need to, but; you probably should not do this to anything with real mother of pearl, because it is super bad for you to breathe in any of the dust from that.
Logged

squeezy

  • Quick starter (now lagging behind)
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1317
  • Hohner Cornelia (mixte D/G/o&s)
    • www.johnspiers.co.uk
Re: Tip for restoring dull pearloid buttons
« Reply #11 on: November 15, 2017, 01:37:56 PM »

I imagine the dust from plastic is similarly not good to breathe in!  But thanks for the heads up.  The one I had was old and had been used and certainly didn't feel like using emery board on the coarsest side.  I'm intrigued by the micromesh which I'd not heard of - but I can't imagine needing anything to be smoother and more polished than the finish I got with the nail block.

Great to have some insider knowledge ... maybe I'm in need of shiny nails too - I definitely need to cut my left hand nails short for stradella stuff!
Logged
Squeezy

Sometimes wrong, sometimes right ... but always certain!

playandteach

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3526
  • Currently a music teacher in a high school.
Re: Tip for restoring dull pearloid buttons
« Reply #12 on: November 15, 2017, 04:19:07 PM »

There are headlight polishing kits that have thinner pads of the same sort of stuff.
Logged
Serafini R2D2 GC, Serafini GC accs 18 bass

Lyra

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 558
Re: Tip for restoring dull pearloid buttons
« Reply #13 on: November 15, 2017, 08:39:45 PM »

So melodeonists are basically just a bunch of old buffers?
Logged

John MacKenzie (Cugiok)

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2360
  • Fettling... Learning to reed and right.
Re: Tip for restoring dull pearloid buttons
« Reply #14 on: November 15, 2017, 09:12:08 PM »

We do scrub up well though.

SJ
Logged
There is no beginning to my talent :)



: Hohner Club Modell 1. Bb/Eb, de-clubbed : Early Hohner Pressed Wood A/D : 1930's Varnished wood G/C:  Hohner Erika C/F: Bandoneon tuned D/G Pressed wood: Koch F/Bb; G/C Pre Corso

Helena Handcart

  • Hero Member
  • *****
  • Online Online
  • Posts: 2452
  • Saltarelle Nell
Re: Tip for restoring dull pearloid buttons
« Reply #15 on: November 15, 2017, 10:42:11 PM »

Whoo somebody bought me one of those things in a manicure kit - vain attempt to turn me into a girl (ha!).  At least now I have a use for it.  Got a stash of liliputs and preciosas to try it out on.
Logged
Saltarelle Le Romané  | Saltarelle Nuage | Oakwood | various elderly Hohners

Broadland Boy

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1243
  • Awful noises from Pokerwork, HA114G, BbEb Liliputs
Re: Tip for restoring dull pearloid buttons
« Reply #16 on: November 16, 2017, 12:11:07 AM »

Micromesh will take you into optical levels of polish if you are careful with the grades.

Have a bit of mother of pearl laid up for repairing a bit of inlay, thanks for the warning as the bivalve which supplied it failed to incorporate the required warning  ;D

Test first on Liliput buttons Helena, IIRC they are casein based and some I tried to clean up were so porous they trapped some of the abrasive too - Theo suggested a tried & tested method but can't recall where I saved it ATM
Logged
Richard A
Venit ventus contrarius ventus egrediente,
Omnes prope quid ventum est circa

tirpous

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1403
Re: Tip for restoring dull pearloid buttons
« Reply #17 on: November 16, 2017, 12:37:41 AM »

Logged

Gena Crisman

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1108
  • 🇬🇧
Re: Tip for restoring dull pearloid buttons
« Reply #18 on: November 16, 2017, 12:46:13 AM »

Have a bit of mother of pearl laid up for repairing a bit of inlay, thanks for the warning as the bivalve which supplied it failed to incorporate the required warning  ;D

Basically the shell breaks into tiny, really sharp particles (unlike the plastics originally in question) that can really irritate your eyes and stick around in and cause problems with your lungs - potentially small enough to make their way through non hepa vacuum filters, too. I mean, it's really only a big deal for people who work with shell like every day, but it's still probably not really something you just want around your house or workshop. Apparently it's common to cut, shape and otherwise work with it under water, as that can contain any dust quite well.

For being such a pain to work with though, it does rather make up for it by being a strikingly beautiful material.
Logged

NickF

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 177
Re: Tip for restoring dull pearloid buttons
« Reply #19 on: November 16, 2017, 12:45:31 PM »

It may well be possible to peel the buffing\filing surfaces from the foam block - that should make it easier to buff the sides of the buttons?

I'm beginning to realise that I may know way too much about these things...
Logged
Serenellini 233, Streb, D/G Pokerwork, D/G Liliput, Bb/Eb Liliput, Bb/Eb Comedy Wardrobe (Hohner Model X), Bb/Eb Accidental Erika

If you can smile when things are going wrong, you must have someone else in mind to blame
Pages: [1] 2   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal