Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: 1 2 3 4 5 [6] 7 8 9   Go Down

Author Topic: Recording king repair  (Read 31476 times)

0 Members and 1 Guest are viewing this topic.

Tiposx

  • Durham in England
  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 259
Re: Recording king repair
« Reply #100 on: December 23, 2017, 10:13:54 AM »

Hi triskel/ edit -I mean boxcall! I am enjoying reading about your restoration. As a hobby I have rebuilt three piano accordions, two melodions and worked on a couple more. I see that the use of Dremels to tune reeds seem to be frowned on here by some, and I  respect their findings. Personally I have tried files, sandpaper, scratchers and home- made tools but I  get the best results with the Dremel fitted with a tiny metal grinding ball.
I do have a steady hand though. I admit to breaking a couple of rusty reeds that were almost 80 years old, but that was using a scratcher and too much pressure with insufficient support.
So I guess I will be on the naughty step with you!
« Last Edit: December 29, 2017, 01:29:56 PM by Tiposx »
Logged

boxcall

  • You got to love it!!!
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1801
Re: Recording king repair
« Reply #101 on: December 28, 2017, 08:48:37 PM »

FYI Tiposx, this is not Triskel's box repair. He would know better than to waste his time on a box like this ;) plus He's got his hands full with other projects.

When I see you on the naughty step I'll scoot over, it was the corner when I was little.


Does wax just being heated to melting point give off dangerous vapor or is it just when it's burning?


I'm about to get into that and want to be safe about it, it's to cold out in the shed so I was wondering if this can be done inside safely.
I'm still trying to figure out the best method of heating it, I could buy a melting pot thing for 20 dollars.
I tried melting leftover wax from my last repair job, it was in a glass candle holder that I had put on a coffee maker hot plate. This worked but it didn't get quite hot enough, I used the paint brush method.

I took the glass candle holder with leftover wax and held a heat gun under it, this worked and got hotter than the other method. I would just need to make sure I have a place to set it down and don't burn myself , also probably be better in a can so the glass doesn't get to hot and break, that wouldn't be good. I made a little wax spoon similar to the one Diatonix used, so I need something wide enough to dip in anyway. I don't think there's a fire risk with this method being just hot air?

One more question for now I am going to put the bass reeds back in the block and then tune, so being that I already tuned the smaller ones (off the block) but not the big ones because I could not on my table. So what would be recommended put the large reeds in the block and tape off the other side and tune the big ones, then put the smaller reeds back in and recheck all?

These share the same hole at the base of block so I can't tape off one side.  And to that,  when tuning both of these reeds how do you know which reed needs adjusting as they would be sounding at the same time and they are hard to isolate.

Thanks for any help!
Logged
Hohner 1040 C, Beltuna one row four stop D, O'Byrne Dewitt/ Baldoni bros. D/C#, Paolo soprani "pepperpot" one row D

malcolmbebb

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2628
  • In dampest Dorset, on the soggy south coast.
Re: Recording king repair
« Reply #102 on: December 28, 2017, 09:04:24 PM »


Does wax just being heated to melting point give off dangerous vapor or is it just when it's burning?
It's not the wax itself, it's the rosin in it. You will need to get it a way above melting point, so that it runs freely or it will start to solidify too soon.
This should be OK, good ventilation is of course recommended. Avoid heating it to the point where it smokes. If it does smoke, avoid breathing the fumes. You won't drop down dead, but the fumes cause a variety of breathing issues so best avoided.

You should not consider burning it. Not a good plan for a variety of reasons.
Logged
Dino BPII.
"Tradition is not the worship of ashes, but the preservation of fire."

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Recording king repair
« Reply #103 on: December 28, 2017, 09:13:15 PM »

Reed wax fumes gave me asthma.  Be very careful.  I now use a fine extractor whenever I am working with melted wax. 
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: Recording king repair
« Reply #104 on: December 28, 2017, 09:19:21 PM »

Reed wax fumes gave me asthma.  Be very careful.  I now use a fine extractor whenever I am working with melted wax.

I wear a fume mask at all times when waxing as, like Theo, it sets off my asthma.

http://www.axminster.co.uk/3m-4000-series-gas-vapour-and-particulate-respirators-ax839414

malcolmbebb

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2628
  • In dampest Dorset, on the soggy south coast.
Re: Recording king repair
« Reply #105 on: December 28, 2017, 09:21:07 PM »

Logged
Dino BPII.
"Tradition is not the worship of ashes, but the preservation of fire."

boxcall

  • You got to love it!!!
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1801
Re: Recording king repair
« Reply #106 on: December 28, 2017, 09:54:03 PM »

Ok, fume extractor  or mask / respirator
Tough time of year to do indoors then.
Ideal temperature for wax?   Maybe just get it to run easily.
Thanks

What about the reeds sharing the same hole in the block how do you isolate the two bass reeds for tuning?
Logged
Hohner 1040 C, Beltuna one row four stop D, O'Byrne Dewitt/ Baldoni bros. D/C#, Paolo soprani "pepperpot" one row D

Winston Smith

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4066
  • AKA Edward Jennings
    • "Our Luxor B&B" Luxor life, slice by slice.
Re: Recording king repair
« Reply #107 on: December 28, 2017, 10:21:54 PM »

Can't you stick some tape over them?
Logged
At last, broken and resigned to accept conformity.
Oh, how I LOVE Big Brother!

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Recording king repair
« Reply #108 on: December 28, 2017, 10:34:07 PM »

Just place your finger over the reed you don’t want to hear.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

boxcall

  • You got to love it!!!
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1801
Re: Recording king repair
« Reply #109 on: December 28, 2017, 10:43:58 PM »

Just place your finger over the reed you don’t want to hear.
Thanks Theo
That makes sense , I over thought that I guess.  Simplicity is brilliant!
Logged
Hohner 1040 C, Beltuna one row four stop D, O'Byrne Dewitt/ Baldoni bros. D/C#, Paolo soprani "pepperpot" one row D

MarioP

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 217
  • Enjoying the MADNESS
    • AnyITsolution.Services
Re: Recording king repair
« Reply #110 on: December 29, 2017, 10:09:57 AM »

I’m waxing. Outdoors open air from now on.
This may be the reason why I keep getting soar throat.
Logged
Hohner Corso A/D x2, G/C, Corona II A/D/G from the 60s.
Hohner Pre Corona II BsEsAs,Club IV C/F Pre-War, Liliput C/F, Mignon I (G) Piano from the 30s, Kromatica III from the 60s harmonica. Hohner Kids I. Pearl Forum series 80s, Zildjian, Sabían, Wuhan cymbals. Ludwig snare 70s.

boxcall

  • You got to love it!!!
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1801
Re: Recording king repair
« Reply #111 on: December 29, 2017, 04:37:49 PM »

Reed wax fumes gave me asthma.  Be very careful.  I now use a fine extractor whenever I am working with melted wax. 
Theo,
Are you talking about a mask like Lester uses or a exhaust fan of some type for fumes?
A mask might protect me but not so much others in the house, maybe I'll just have to wait for warmer weather. The only heat I have in the shop is a propane unit which adds moisture to the place, I usually only use it for short spells. The place isn't insulated or I get an electric heater.

Just place your finger over the reed you don’t want to hear.
So when your doing final tuning in the box, what then?
Maybe tape over the top of reed and or valve on the bass block, on the treble I can tape over holes in the bottom of block but can't on this bass block.
Logged
Hohner 1040 C, Beltuna one row four stop D, O'Byrne Dewitt/ Baldoni bros. D/C#, Paolo soprani "pepperpot" one row D

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Recording king repair
« Reply #112 on: December 29, 2017, 05:05:24 PM »

Lots of fume extractors with different designs.  Search eBay for “solder fume extractors” and you will find a variety of designs.  It’s the rosin in reed wax that is the main hazard, and it’s also used as a flux for soldering, so the solder fume extractors is very suitable.

When tuning reeds inside the box I’ll use registers where available, or masking tape on the underside of the block.  Where two reeds share one vent then I’ll stick masking  tape over one reed and valve.  With care it can be removed without damaging the valve.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: Recording king repair
« Reply #113 on: December 29, 2017, 08:17:17 PM »

When tuning reeds inside the box I’ll use registers where available, or masking tape on the underside of the block.  Where two reeds share one vent then I’ll stick masking  tape over one reed and valve.  With care it can be removed without damaging the valve.
The Marc Serafini method of using masking tape in this situation is to dab the sticky side of the masking tape on to an item of clothing such as jeans or tee-shirt a couple of times. This reduces the stickiness a bit and makes it easier to remove the masking tape afterwards with less risk of damage to the valve. Peel it off gently from the rivet end, keeping the tape close and parallel to the reed plate - like peeling a banana.

The same piece of masking tape can usually be used on several reed plates before the stickiness fails completely. Then just cut a new piece.  (:)
Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: Recording king repair
« Reply #114 on: December 29, 2017, 08:21:42 PM »

When tuning reeds inside the box I’ll use registers where available, or masking tape on the underside of the block.  Where two reeds share one vent then I’ll stick masking  tape over one reed and valve.  With care it can be removed without damaging the valve.
The Marc Serafini method of using masking tape in this situation is to dab the sticky side of the masking tape on to an item of clothing such as jeans or tee-shirt a couple of times. This reduces the stickiness a bit and makes it easier to remove the masking tape afterwards with less risk of damage to the valve. Peel it off gently from the rivet end, keeping the tape close and parallel to the reed plate - like peeling a banana.

The same piece of masking tape can usually be used on several reed plates before the stickiness fails completely. Then just cut a new piece.  (:)

I use the sticky bits of post-it-notes which I have in the workshop for labelling stuff, quick notes etc

boxcall

  • You got to love it!!!
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1801
Re: Recording king repair
« Reply #115 on: December 29, 2017, 10:19:33 PM »

Thanks Gents, I'll make a note of it (:)
I been looking at the extractors some are pretty pricey, There's a ton of DIY on YouTube that could be made, but I really don't do enough waxing or soldering to justify it. Also some cheap ones that probably don't really work. I suppose my wife is not going to let me set up shop under the range hood.
Logged
Hohner 1040 C, Beltuna one row four stop D, O'Byrne Dewitt/ Baldoni bros. D/C#, Paolo soprani "pepperpot" one row D

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: Recording king repair
« Reply #116 on: December 30, 2017, 12:21:05 AM »

I use the sticky bits of post-it-notes which I have in the workshop for labelling stuff, quick notes etc
Yes - I used to do that, but abandoned it when Theo showed me the Marc Serafini masking tape method. The masking tape is more flexible than the post-it note paper and can be moulded around the edges of the reed plate. This is especially useful to stop the valve lifting and leaking air when working on the pull reeds. A piece of partially de-stickied, standard width, masking tape will fit nicely over the width of the reed plate and serves to silence both push and pull reeds effectively.
Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk

boxcall

  • You got to love it!!!
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1801
Re: Recording king repair
« Reply #117 on: December 30, 2017, 03:17:43 AM »

Thanks for that Steve!
so I need
mask for the waxing fumes-- chokes
masking tape (unstickyed) for reeds
mask of a well known fettler (well it couldn't hurt)
and a whole lot of luck, plus all this good info I have been given.
Thanks all

Valves are all done.

I just repaired some chips in the bass end plate, it's plywood and since the paint was poor and there was an unfinish patch
where the old air bar was located, so I gave it a new coat of paint. It was an off white which didn't really match the box color
so I just used black (because I had some and it goes with some parts and the straps). I'll put new cloth on tomorrow.

I wish I could get the grill cleaned up better, I try polishing it with a jewlers paste and a dry cloth but it's not really getting the job done.
It appears to be missing some finish in spots so I guess I just live with it or paint it, I'll probably just let it be.

I also have a couple of small cracks ( near the screws) in the finger board (plastic?) plate, I guess I could use a little super glue on these to stablize the area.

I try posting some pics of progress at some point.

Funny I just noticed on my new Imac desktop that I don't have any Emoji's available---sad face.
Does any one know why? I'm usually on my Ipad so I haven't noticed this, I like the ipad because it helps with my poor spelling--- happy face.
Logged
Hohner 1040 C, Beltuna one row four stop D, O'Byrne Dewitt/ Baldoni bros. D/C#, Paolo soprani "pepperpot" one row D

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: Recording king repair
« Reply #118 on: December 30, 2017, 08:53:59 AM »

Funny I just noticed on my new Imac desktop that I don't have any Emoji's available---sad face.
Does any one know why? I'm usually on my Ipad so I haven't noticed this, I like the ipad because it helps with my poor spelling--- happy face.
The emojis are usually available from the keyboard menu icon at the top RH side of the menu strip (next to the date and time). Click and hold and you should see the 'Show Emoji and Symbols' option.

If you can't see that option, go to your System Preferences (cogwheel icon available in the Launcher) and choose 'Keyboard' then ensure the 'Show keyboard and emoji viewers in menu bar' is ticked.  See attachment below.
Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk

boxcall

  • You got to love it!!!
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1801
Re: Recording king repair
« Reply #119 on: December 30, 2017, 01:47:16 PM »

Thanks Steve,
I'll try that, these computers are like my local hardware store as soon as I figure out where something is located, it gets moved.

I thought the emojis that are located just above the area where I'm typing now (post reply) are part of this site?
Maybe they will show after I do what you suggest. Also its not just the emojis but all the other stuff that sits above them, eg. bold, underline etc.
Logged
Hohner 1040 C, Beltuna one row four stop D, O'Byrne Dewitt/ Baldoni bros. D/C#, Paolo soprani "pepperpot" one row D
Pages: 1 2 3 4 5 [6] 7 8 9   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal