Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: 1 [2] 3 4 5 6   Go Down

Author Topic: Reed blocks ... come on then - how do you do it?  (Read 25519 times)

0 Members and 1 Guest are viewing this topic.

Graham Spencer

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3548
  • MAD as a wet Hohner........
Re: Reed blocks ... come on then - how do you do it?
« Reply #20 on: December 03, 2017, 05:50:41 PM »

Actually I was thinking how I would not like to use a belt sander on such a delicate structure.  With a mate of mine we have made some remarkable shapes with one holding the belt sander whilst the other manipulates the workpiece.  It doesn't really lend itself to producing a flat surface, though.  .

I guess you're thinking of a hand-held belt sander; I make a lot of use of a bench-mounted belt sander and it is superb for producing flat surfaces.  I wouldn't dream of using a hand-held for such jobs - I don't even much like them for jobs like sanding doors or floors for painting/varnishing. A random orbital sander makes a much better job - but I wouldn't try to use one of those for making reedblocks, either!

Graham
Logged
Among others, Saltarelle Pastourelle II D/G; Hohner 4-stop 1-rows in C & G; assorted Hohners; 3-voice German (?) G/C of uncertain parentage; lovely little Hlavacek 1-row Heligonka; Bâ™­/Eâ™­ Koch. Newly acquired G/C Hohner Viktoria. Also Fender Jazz bass, Telecaster, Stratocaster, Epiphone Sheraton, Charvel-Jackson 00-style acoustic guitar, Danelectro 12-string and other stuff..........

Squeezing in the Cyprus sunshine

boxcall

  • You got to love it!!!
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1801
Re: Reed blocks ... come on then - how do you do it?
« Reply #21 on: December 05, 2017, 01:27:15 AM »

I think bench sanders are pretty good for getting things flat if you know how to use them and the wood is a solid but with reed chambers no matter which way you hold it you would have un supported wood and grain in different directions which as Micobot stated would lead to tear out on the exit side and bitting in on the leading edge. I haven't done reed blocks but have sanded quite a bit of wood over the years. I think I watch a video of Marc Savoy cutting his reed blocks on a table saw with tapering jig, put on a good carbide planer blade and you would have nice clean smooth cut. Push stick and special jig required (:)

I was wondering how important is the dado/ notching the reed chamber dividers into the top (or bottom on flat mounted) of reed block? I think you will see what I mean if you look at how the bass blocks are put together in the pictures Steve posted, I see some makers and boxes that have this detail throughout treble and bass side. Of course there more glue surface which is stronger but is it needed? The other advantage may just be for alignment of parts where the little assembly jig use in the pictures is not needed.
Logged
Hohner 1040 C, Beltuna one row four stop D, O'Byrne Dewitt/ Baldoni bros. D/C#, Paolo soprani "pepperpot" one row D

melodeon

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1732
Re: Reed blocks ... come on then - how do you do it?
« Reply #22 on: December 05, 2017, 02:17:12 AM »

Here in Ammurrika... we have no such thing as a "bench sander"...
considering we speak and write different languages... could you describe/define a "bench sander" ?

Thanks...

Logged

syale

  • The Terrier
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 711
  • When will this MADness stop?
Re: Reed blocks ... come on then - how do you do it?
« Reply #23 on: December 05, 2017, 02:34:23 AM »

Here in Ammurrika... we have no such thing as a "bench sander"...
considering we speak and write different languages... could you describe/define a "bench sander" ?

Thanks...

https://www.homedepot.com/p/Ryobi-120-Volt-Bench-Sander-Green-BD4601G/205509608
Logged
HA114 C/G/A/D, 2915 G/C. Liliput, Club IIB C/F Dino Baffetti Modell 22 B Twitter: @syale

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Reed blocks ... come on then - how do you do it?
« Reply #24 on: December 05, 2017, 08:41:47 AM »


https://www.homedepot.com/p/Ryobi-120-Volt-Bench-Sander-Green-BD4601G/205509608

But that particular design is not very good (British understatement).   The better ones have a cast iron bed supporting the sanding belt.  As an emergency replacement we used one like this on the last  melodeon building class and discovered that the bed, made of rather thin steel plate, was curved.  Surfaces that had to be flat, such as the base of reed blocks, had to be finished by hand.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Rog

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2525
  • Repair and tuning in Hants
Re: Reed blocks ... come on then - how do you do it?
« Reply #25 on: December 05, 2017, 08:56:56 AM »

- but I can't see how a table saw would be used.

They are good for making stock..e.g. cutting thin strips of timber to the dimensions you require.

rees

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 5055
  • Windjammer
    • Wesson Accordions
Re: Reed blocks ... come on then - how do you do it?
« Reply #26 on: December 05, 2017, 12:04:18 PM »

Belt sander pic attached:
Logged
Rees Wesson (accordion builder and mechanic)
Gungrog, Welshpool, Wales, UK
www.melodeons.com

squeezy

  • Quick starter (now lagging behind)
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1317
  • Hohner Cornelia (mixte D/G/o&s)
    • www.johnspiers.co.uk
Re: Reed blocks ... come on then - how do you do it?
« Reply #27 on: December 05, 2017, 12:14:57 PM »

Belt sander pic attached:

Stop boasting ... size isn't everything  :o
Logged
Squeezy

Sometimes wrong, sometimes right ... but always certain!

Graham Spencer

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3548
  • MAD as a wet Hohner........
Re: Reed blocks ... come on then - how do you do it?
« Reply #28 on: December 05, 2017, 12:35:15 PM »

Belt sander pic attached:

That's the bigger brother of mine.  I also have a small, reasonably cheap bench-mounted one, in design not unlike the Ryobi in syale's post but with a cast iron bed, and carefully set up and using good quality abrasive belts, it works pretty well.

Graham
Logged
Among others, Saltarelle Pastourelle II D/G; Hohner 4-stop 1-rows in C & G; assorted Hohners; 3-voice German (?) G/C of uncertain parentage; lovely little Hlavacek 1-row Heligonka; Bâ™­/Eâ™­ Koch. Newly acquired G/C Hohner Viktoria. Also Fender Jazz bass, Telecaster, Stratocaster, Epiphone Sheraton, Charvel-Jackson 00-style acoustic guitar, Danelectro 12-string and other stuff..........

Squeezing in the Cyprus sunshine

baz parkes

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1894
    • All Blacked Up
Re: Reed blocks ... come on then - how do you do it?
« Reply #29 on: December 05, 2017, 01:32:40 PM »

- but I can't see how a table saw would be used.

They are good for making stock..

Should I ever call round for dinner, remind me to give the soup a miss... :|glug
Logged
On the edge of Cheshire's Golden Triangle, apparently...

melodeon

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1732
Re: Reed blocks ... come on then - how do you do it?
« Reply #30 on: December 05, 2017, 02:29:26 PM »

Thanks for the link to Home Depot's toy section.  About 25-30 yrs ago, Ryobi made some very fine tools, this not being anything related to that era of quality and utility.

I did own something similar made by Delta Rockwell in the 40s-50s.

However it was bigger, had a flat platen of cast iron backing the belt and robust fittings. I miss it.

I like some of the Jet and Powermatic versions of this "bench sender"... not a term professional woodworkers use in my experience.
However , I do not want the combination of the disc sander and belt, I want belt alone.  I have a 50s Delta Rockwell  stationary 10" disc sander which I have used often and continuously for over 40 years.. still going strong and parts still available.

I am tempted, and suggest that others look for older equipment.
Logged

rees

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 5055
  • Windjammer
    • Wesson Accordions
Re: Reed blocks ... come on then - how do you do it?
« Reply #31 on: December 05, 2017, 04:03:43 PM »

Mine was bought new 10 years ago. It is Chinese made. I work it hard but I've never had a problem with it.
Logged
Rees Wesson (accordion builder and mechanic)
Gungrog, Welshpool, Wales, UK
www.melodeons.com

blafleur

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 530
Re: Reed blocks ... come on then - how do you do it?
« Reply #32 on: December 05, 2017, 05:08:35 PM »

All this talk of belt sanders.  I have a large sander like Rees pictured, and I used it daily for all sorts of jobs, but not so much on reed blocks.  For tapering and cutting to size, I use table saw jigs.  That way I can cut multiple of the same size in a single pass.  This is a pic of one I don't use anymore, but you get the idea.
http://lansegriseaccordions.comeze.com/2-2%20cutting%20reed%20block%20angles.JPG

squeezy

  • Quick starter (now lagging behind)
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1317
  • Hohner Cornelia (mixte D/G/o&s)
    • www.johnspiers.co.uk
Re: Reed blocks ... come on then - how do you do it?
« Reply #33 on: December 05, 2017, 05:42:33 PM »

Thanks for the continued advice here.  I don't have a belt sander, and I certainly don't have room for one like Rees has!  I'm still trying different things out with creating solid wood combs and I think I will probably succeed in making a working block this way.

I have modeled the blocks I want to make in Google Sketchup using all the relevant dimensions from the original instrument - the only differences in the design is that I am aiming for a waxless block and the different lengths of the reed plates.  For the reed combs I am using ash which I'm cutting to size and then planing to the correct taper.  I've printed out a scale template from sketchup and then attempting to cut out using my electric scroll saw.  With the right blade and good scroll saw skills (I'm not great but I'm getting much better!) this is fairly quick and easy.  I'm still trying out different blades and techniques and have a growing collection of little bits of ash - great kindling!

Obviously some of the advice here is from people making reed blocks as part of building whole instruments on a regular basis ... obviously I'm just playing here and not trying to optimise how quickly I'm making these ones.
Logged
Squeezy

Sometimes wrong, sometimes right ... but always certain!

boxcall

  • You got to love it!!!
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1801
Re: Reed blocks ... come on then - how do you do it?
« Reply #34 on: December 05, 2017, 05:57:35 PM »


I like some of the Jet and Powermatic versions of this "bench sender"... not a term professional woodworkers use in my experience.

Stationary belt or edge sander would be correct for a floor model but if mounted to a bench, then bench or bench mounted belt sander seems right.
Grizzly is another maker worth considering. They have belt only models and priced competitively.
https://www.grizzly.com/edge-sanders
I have a floor model drill press that is well built. These are not high end machines ( neither is jet or powermatic) but do the job , are good quality and are priced better. And have good customer service which I have had no need for to date.

With the one Sayle posted you could probably get the same results by flipping a portable hand belt sander over and clamping it in a vise, both giving poor results for large pieces. If you are using these stationary belt sanders for cleaning up edges after say cutting with a table saw, try a planer blade they have no set and don't leave marks as long as you keep it tight to the fence and keep the feed rate consistent. I use them for all my table saw cuts (combination blades) for ripping and cross cuts and with short flat stock you can usually get thing as smooth as a joiner for edge to edge glue ups.
Logged
Hohner 1040 C, Beltuna one row four stop D, O'Byrne Dewitt/ Baldoni bros. D/C#, Paolo soprani "pepperpot" one row D

boxcall

  • You got to love it!!!
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1801
Re: Reed blocks ... come on then - how do you do it?
« Reply #35 on: December 05, 2017, 06:08:38 PM »

All this talk of belt sanders.  I have a large sander like Rees pictured, and I used it daily for all sorts of jobs, but not so much on reed blocks.  For tapering and cutting to size, I use table saw jigs.  That way I can cut multiple of the same size in a single pass.  This is a pic of one I don't use anymore, but you get the idea.
http://lansegriseaccordions.comeze.com/2-2%20cutting%20reed%20block%20angles.JPG
Makes sense to cut them that way.

I see you dado the chamber side pieces into the top (pretty deeply I might add) do you also dado into the bottom piece? What is the benefit to the dado ?  I asked this question above in a post.

Edit to add: I can't see how the taper is cut in the photo, can you explain?

Just a note: is that insert you use during the cut? I like to have mine closer when cutting small narrow pieces, I usually make my own from wood and run the blade up though so there's no space. This also helps with tear out. You probably do the same and are just showing a photo of the jig.
I know these inserts can be bought but I'm a yankee.
« Last Edit: December 05, 2017, 06:21:14 PM by boxcall »
Logged
Hohner 1040 C, Beltuna one row four stop D, O'Byrne Dewitt/ Baldoni bros. D/C#, Paolo soprani "pepperpot" one row D

Gena Crisman

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1108
  • 🇬🇧
Re: Reed blocks ... come on then - how do you do it?
« Reply #36 on: December 05, 2017, 06:56:47 PM »

Thanks for the continued advice here.  I don't have a belt sander, and I certainly don't have room for one like Rees has!

Although you will probably be served perfectly well by your scroll saw, I thought I should mention something. There's a movement amongst the physically (vs artistically?) creative nowerdays, called maker spaces (also sometimes hacker spaces - I think they sort of started as a software development socials but now have spread out to a lot of things, including woodworking). They're far more common in the USA but there are a few of them in the UK now, basically they're intended to be communal workspaces where less accessible tools (such as a belt sander) might be made available for people who can't afford their own. Bigger spaces are usually better equipped, although I'm not sure how many in the UK have anything more high tech such as a 3d printer or laser cutter, but if you live in or near a bigger city, perhaps there may be something near you that you could visit, if it seemed necessary. Or, perhaps there might just be something similar near you at any rate, perhaps a slightly less "We reinvented shared workspaces" type place, as I'm sure this isn't a new idea - the main thing I guess is that maker spaces can be easier to find since they almost always have an online presence.

Anyway, have fun and try not to include any fingers in your final design. Having an appreciation of the kind of work that goes into making your instrument is, I think, very rewarding.
Logged

boxcall

  • You got to love it!!!
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1801
Re: Reed blocks ... come on then - how do you do it?
« Reply #37 on: December 05, 2017, 07:34:09 PM »

Gena,
I love the concept of this, but from a contractor & woodworker perspective this seems like a liability nightmare considering the dangers involved. Who would insure these places?
Maybe you'd have to sign a waiver?

I know a lot of experience wood workers walking around with fewer digits than they started out with, never mind less experience folks using equipment they are not familiar with. Yikes!
At home or in a place of everyday business at least you would be insured or should be.

I guess if they have equipment with auto stop when fingers and other parts get to close that could work.
I don't mean to be a downer it's a good idea.

I don't think you need the Belt sander a table saw and or router could do the job with the proper jigs
Logged
Hohner 1040 C, Beltuna one row four stop D, O'Byrne Dewitt/ Baldoni bros. D/C#, Paolo soprani "pepperpot" one row D

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: Reed blocks ... come on then - how do you do it?
« Reply #38 on: December 05, 2017, 07:38:54 PM »

Gena,
I love the concept of this, but from a contractor & woodworker perspective this seems like a liability nightmare considering the dangers involved. Who would insure these places?
Maybe you'd have to sign a waiver?

I know a lot of experience wood workers walking around with fewer digits than they started out with, never mind less experience folks using equipment they are not familiar with. Yikes!
At home or in a place of everyday business at least you would be insured or should be.

I guess if they have equipment with auto stop when fingers and other parts get to close that could work.
I don't mean to be a downer it's a good idea.

I don't think you need the Belt sander a table saw and or router could do the job with the proper jigs

They definitely exist, Owen Woods of this parish built a melodeon at the Cambridge Makespace using their laser wood cutter
http://makespace.org/

malcolmbebb

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2628
  • In dampest Dorset, on the soggy south coast.
Re: Reed blocks ... come on then - how do you do it?
« Reply #39 on: December 05, 2017, 07:42:31 PM »

Well they do exist, I think the nearest to me is Bristol. However, whether they let people loose on circular saws and other body modifying devices is another matter.
Maybe under supervision...

Now a laser cutter - would sign up to borrow one of those.
Logged
Dino BPII.
"Tradition is not the worship of ashes, but the preservation of fire."
Pages: 1 [2] 3 4 5 6   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal