Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: G/C to B/C conversion  (Read 4632 times)

0 Members and 1 Guest are viewing this topic.

Stiamh

  • Old grey C#/D pest
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3611
    • Packie Manus Byrne
G/C to B/C conversion
« on: December 06, 2017, 08:03:57 PM »

Pondering what to do with the ultra-wet G/C Primatona IV that I asked for opinions about a few days ago, I remembered that the estimable Michael Rowbotham told me - probably when I told him about the beast before I shelved it - that G rows could be converted to B rows using most of the existing reedplates, with re-tuning.

Attached is a diagram of what (I think) this would involve. Any thoughts or comments? Insane amount of work on a 4-voice box? Which btw needs retuning anyway, and probably rewaxing as well. Thanks in advance.

gettabettabox

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 684
Re: G/C to B/C conversion
« Reply #1 on: December 06, 2017, 10:06:07 PM »

Hi stiamh. I see from your you tube vids, (thank you once again for these,) that you are on a box journey like many of us....and have played some fine accordions, so, in my mind, you can't be seriously thinking that this will be a contender as a player? More a labour of love I'm guessing?!
Even leaving it in G/C but having a clean, tune, valves and wax of a four voice box would be quite an expensive job for the end result I think, and unless for a primatona, it has a particularly good action, it doesn't make financial sense.
I can't offer you any encouragement!

(Says he who has squandered an embarrassing amount of loot on these implements. (:))

Logged

Microbot

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 345
Re: G/C to B/C conversion
« Reply #2 on: December 06, 2017, 10:07:31 PM »

Hi Steve,

converting a G/C to B/C is very straightforward. Yes, there's some work to do, but the principle is simple. Basically, you are marching the reeds one position along the block ... as you would with either a Bb/Eb to D/G conversion or A/D to C#/D.

What's required is neat chamber-work to adjust the reedblock chambers to match the new reed positions plus careful tuning.

Your re-tune chart is accurate, showing that almost all the tuning involves semitone adjustments (although there would seem to be one typo with your first note on the B-row given as B# !)

The one reed I would certainly look to 'import' would be the 9th button B/G# which involves a jump of a full tone.

As regards the overall job - as you rightly say, the box needs a complete rewax and tune-up. What better time to make fundamental key changes. I'd have a word with any of the Irish box-fettling brigade ... I know Triskel has commented on converting G/C Paolos to B/C. My guess is that he would want to keep the original reeds and exactly your re-tune pattern would be what was often followed.

cheers and a merry Christmas to you and yours!

Mike
Logged

gettabettabox

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 684
Re: G/C to B/C conversion
« Reply #3 on: December 06, 2017, 10:14:26 PM »

Now you have some encouragement!...and from a well respected source.
 (:)
Logged

Stiamh

  • Old grey C#/D pest
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3611
    • Packie Manus Byrne
Re: G/C to B/C conversion
« Reply #4 on: December 07, 2017, 12:03:18 AM »

... you can't be seriously thinking that this will be a contender as a player? More a labour of love I'm guessing?! Even leaving it in G/C but having a clean, tune, valves and wax of a four voice box would be quite an expensive job for the end result I think, and unless for a primatona, it has a particularly good action, it doesn't make financial sense.

No financial sense whatever, GBB! It's not much more than pipe-dreaming at the moment. I'd like to have the time and leisure to learn to fix up boxes myself, for one thing. And although I don't really need a B/C box in LMMM (let's rephrase that, I really don't need one), I actually think it would be a great player. It's rather fun even now, despite the abysmal state of tune: buttons don't disappear down the holes, it's not very heavy or difficult to play - more manageable than a pre-Corso that I have, and a lot easier than a friend's 9-coupler Paolo, and I think it could easily rival that box in terms of power and tone.

What's the alternative? Cannibalize it for parts, I suppose.

Thanks for the encouragement, Mike (and best wishes to you and yours for Christmas, likewise!). The idea of having to adjust chamber dimensions would seem to move the project into a further sphere of difficulty... You might have just talked yourself into doing the job. (:)

Still can't understand how it came to be made in G/C, if indeed it was...

boxcall

  • You got to love it!!!
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1801
Re: G/C to B/C conversion
« Reply #5 on: December 07, 2017, 12:25:36 AM »

Are you switching teams ;) seriously it could be a fun project and it looked like it was in good shape.
And it sounded like it has potential.
Could you use the same fingering as on the C#/D and have it come out as? If so might be worth doing.

I just started fixing the GCF Hohner box I picked up for free, I'll be doing the valves, rewax, tuning as needed, put on some new straps. Then I'll see if it needs more like pallet felt etc. it could use bellow tape to look better but that could wait. I fixed up My Hohner 1040 ( my Papa's box) it was a great project, this will be more of a challenge with more reeds to deal with and I will have a go at tuning it.
I don't need a GCF but figure it will be fun and won't cost to much for the material.
« Last Edit: December 07, 2017, 12:27:17 AM by boxcall »
Logged
Hohner 1040 C, Beltuna one row four stop D, O'Byrne Dewitt/ Baldoni bros. D/C#, Paolo soprani "pepperpot" one row D

Microbot

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 345
Re: G/C to B/C conversion
« Reply #6 on: December 07, 2017, 03:36:28 AM »

Hi Steve

I agree they are super boxes ....

The idea of having to adjust chamber dimensions would seem to move the project into a further sphere of difficulty... You might have just talked yourself into doing the job. (:)

... this is really not difficult. You simply strip the blocks, then lay each reed in its new position - if there's a gap at the top of the chamber, carve a small slither of wood to fit and reduce the chamber by the right amount - glue in place. Tedious but no wizardry ....

tuning reeds that need to shift through a semi-tone  is more problematic if you haven;t tuned before! But lots of people have done it ... you'd have the C-row to practice on which should only require fine-tuning. 

a good Christmas project!
Logged

Gromit

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 588
Re: G/C to B/C conversion
« Reply #7 on: December 07, 2017, 10:01:18 AM »

I know little about the internal workings of a LMMM 4 voice box - is it possible to remove all the L reeds and play it as a 3 voice MMM box? I'm not suggesting this but just curious.
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: G/C to B/C conversion
« Reply #8 on: December 07, 2017, 10:10:35 AM »

Stiamh if you want to learn about box repair this seems to be an ideal opportunity.  I agree with previous posts about the approach to converting to BC.  You should also find that the first button on the C row has low notes it will need to be changed from E/G to E/A. 
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Stiamh

  • Old grey C#/D pest
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3611
    • Packie Manus Byrne
Re: G/C to B/C conversion
« Reply #9 on: December 07, 2017, 10:49:00 AM »

Is it possible to remove all the L reeds and play it as a 3 voice MMM box?

No need to remove anything - the Primatona IV has couplers to switch from LMMM to MMM (as do 4-v Paolo Sopranis).

Gromit

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 588
Re: G/C to B/C conversion
« Reply #10 on: December 07, 2017, 12:19:20 PM »

Thanks Stiamh but what I meant to ask - is it possible to remove the "L" reeds in any 4 voice box to convert it into a 3 voice to cut down on weight and would it be playable with those reeds missing, not that I plan to do this just curious.
Logged

triskel

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3290
Re: G/C to B/C conversion
« Reply #11 on: December 07, 2017, 12:58:27 PM »

Thanks Stiamh but what I meant to ask - is it possible to remove the "L" reeds in any 4 voice box to convert it into a 3 voice to cut down on weight and would it be playable with those reeds missing, not that I plan to do this just curious.

It's certainly do-able, but I'd consider it utterly pointless. You still wouldn't have the two big advantages of a 3-voice, which are that it's usually physically smaller (when I'd consider the bulkier nature of a 4-voice to be more of an issue than any extra weight), and the inside row is stronger in sound/better balanced because the extra reedblock in a 4-voice is tucked away under the keyboard.

gettabettabox

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 684
Re: G/C to B/C conversion
« Reply #12 on: December 07, 2017, 03:37:01 PM »

Stiamh if you want to learn about box repair this seems to be an ideal opportunity.  I agree with previous posts about the approach to converting to BC.  You should also find that the first button on the C row has low notes it will need to be changed from E/G to E/A. 
Having seen the pic posted in an earlier thread, the first button reeds are accidental so, so will need replacing just on the C row.
Logged

Gromit

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 588
Re: G/C to B/C conversion
« Reply #13 on: December 07, 2017, 03:59:01 PM »

Thanks for the answer triskel.
Logged

rees

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 5055
  • Windjammer
    • Wesson Accordions
Re: G/C to B/C conversion
« Reply #14 on: December 07, 2017, 04:52:47 PM »

I have a D/D# Amatona IV for sale on my website at www.melodeons.com
It's a bit tatty as the bellows papers are worn but it plays well.
Logged
Rees Wesson (accordion builder and mechanic)
Gungrog, Welshpool, Wales, UK
www.melodeons.com

gettabettabox

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 684
Re: G/C to B/C conversion
« Reply #15 on: December 08, 2017, 04:57:07 PM »

Quote from pearse

The Corso is probably more unwieldy than the Primatona. Having said that, the MMM of the Corso and the absence of any coupler mechanism, can produce a very fine tone.
I think one of the biggest flaws in the Primatona is what you have described above, plus the fact that the pallet
lift is woeful and to get any decent volume requires force.

I am awaiting delivery of a rather nice corso in C/C#, which is destined for C#/D status...as long as it doesn't sound too gorgeous as it is?!  ::)
I had one in C/C# a while back and it was a very responsive and great sounding box.
Admittedly, this model has just the 21 treble buttons, but with three voices and coming in at under 9lbs in weight?!!
A richer bass side as well if required.
 (:)
« Last Edit: December 08, 2017, 05:04:25 PM by gettabettabox »
Logged

gettabettabox

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 684
Re: G/C to B/C conversion
« Reply #16 on: December 08, 2017, 05:00:21 PM »

Apologies for drifting away from stiamh's topic.
Logged
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal