Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: 1 [2]   Go Down

Author Topic: Castagnari glue  (Read 4609 times)

0 Members and 1 Guest are viewing this topic.

boxcall

  • You got to love it!!!
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1801
Re: Castagnari glue
« Reply #20 on: December 17, 2017, 04:47:35 PM »

Animal glues are used on instruments precisely because they are reversible, therefore the instruments can be taken apart for restoration and repair.  This is the norm in the violin world.  PVA wood glue is great stuff for a permanent joint, but my recent experience of making reedblocks shows that if you need to reverse set glue, pVA rips parts of the wood away all too easily making re-gluing very problematic.
I understand the need to use animal glue for instruments, I guess a catch 22 where easy to take apart also easy to fall apart. I would think the casework on a box is not something you would need to take apart, but I may be wrong.  My experience with glue and mostly PVA is when taking apart end grain joints is that they usually break apart clean ( not always), long grain is a different matter and as you say tears apart. Trouble with end grain joints that have been taken apart is that they don't reglue well.
You'd have to open the grain again not easy to do.

Thanks for all the replies and comments.


I appreciate this quote... and have discussed this with Cajun  accordeon makers and players frequently over the years...

Quote from titebond:
"Get good results gluing end grain joints.
Although good joint design minimizes the need for gluing end grain, sometimes end grain joints are unavoidable. The strength of end grain joints can be improved if the "open" end grain is first sized. A sizing mixture may be made by mixing one part to two parts water to one part glue. Place the sizing mixture on the end grain. Let it soak in for no more than two minutes, and then continue with a regular application of glue."

The key phrase here is ... "although good joint design minimizes the need for gluing end grain".  Not yet recognized by the "big 3" Cajun box builders who have yet to discover miters.


And, Diatonix, thanks for the observation on the Castagnari cracked corner failures... crystalline?  .. may mean wrong temperature, wrong mix therefore too brittle?



A good way to improve on end grain or mitre joints is to put in a spline,  not only strong but can decorate at the same time. I use mitre joints all the time for door interior casing trim (mitre on decorative trim not flat stock) when putting these end grain joints together I use a biscuit in the joint they don't come apart. Prior to that pre biscuit joiners (no matter what glue) was use the joint almost always failed over time. Splines and biscuits also great for alignment of the joint.

I was looking at the PA bellows on the PA I just got and the block that joins the corner of frame is also part of a spline that locks the corner together, one piece doing double duty.

There's probably some makers that use this type of splined joint on their casework and if so they are not planning on it being taken apart, at least not easily.
Logged
Hohner 1040 C, Beltuna one row four stop D, O'Byrne Dewitt/ Baldoni bros. D/C#, Paolo soprani "pepperpot" one row D

Gromit

  • Hero Member
  • *****
  • Online Online
  • Posts: 588
Re: Castagnari glue
« Reply #21 on: December 17, 2017, 05:02:39 PM »

Glueing end grain is not really the done thing in quality cabinetmaking work - a mitred dovetail is the way to go.
Logged

melodeon

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1732
Re: Castagnari glue
« Reply #22 on: December 17, 2017, 05:11:00 PM »

And it doesn't smell as bad, and it doesn't attract mould (mold)  and fungi.

It is also lower in price and already in a semi liquid state. I use about 3 ( plus or minus)  US gallons a year.
Logged

Stockaryd

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 255
Re: Castagnari glue
« Reply #23 on: December 17, 2017, 09:14:24 PM »

Fish glue is even better,  and if you are an expert  (no, I'm not)    you can use use glue from different fishes  for different purposes.

In the past, the Sami used different fishglue.
Logged
Hohner Corso, Hohner Erica, Emmanuel Pariselle, Gessner,   Koch,   Mariotti,    "China  NoName",   4 Toy,     -and now some more

melodeon

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1732
Re: Castagnari glue
« Reply #24 on: December 17, 2017, 11:27:25 PM »

Cod for cod pieces,
Halibut for the helluvit
Bass for the Bass side
And when gluing bits for the treble side, catch the fish with treble hooks.

Logged

boxcall

  • You got to love it!!!
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1801
Re: Castagnari glue
« Reply #25 on: December 18, 2017, 12:35:58 AM »

Bluefish makes a good glue fish.
Trout when you run out .
 This could snowball. Best to stop now.
Logged
Hohner 1040 C, Beltuna one row four stop D, O'Byrne Dewitt/ Baldoni bros. D/C#, Paolo soprani "pepperpot" one row D

Stockaryd

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 255
Re: Castagnari glue
« Reply #26 on: December 18, 2017, 07:32:00 AM »

Well -  there is still:

salmon
char
brown trout
roach
bleak

. . . .  and I am still waiting for a limerick   :)
Logged
Hohner Corso, Hohner Erica, Emmanuel Pariselle, Gessner,   Koch,   Mariotti,    "China  NoName",   4 Toy,     -and now some more

playandteach

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3526
  • Currently a music teacher in a high school.
Re: Castagnari glue
« Reply #27 on: December 18, 2017, 10:19:29 AM »

Not a Limerick but a song - in 6/8 (mainly dee dum diddy dum, dee dum diddy dum) If anyone can't work it out I could put the notes to it.

The glue was the finest, all haddock and chub
Boiled together in a Bakelite tub
Unfortunately it got all over the plaice
I was having for dinner so we had to have dace

My wife said "it's messy, why can't you do what
you do in the kitchen when mending a pot"
So I moved all the oils, both sunflower and rape
And got out my big roll of black gaffer tape

I can't say it's pretty but it's certainly stuck
But then again so is my wife and the duck
We were roasting for supper the very next day
I'll take it to Theo for it really won't play

The Bakelite's ruined too, that was the pride
Of my family with my ma's ashes inside
They won't even look at me on Christmas Day
Should have known as I started that I'd have to pay

I've promised my wife this one thing as I write
To avoid more bad feeling and hair turning white:
Stay out of the kitchen, for I can't undo
The damage I caused when I made my fish glue.
« Last Edit: December 18, 2017, 10:36:38 AM by playandteach »
Logged
Serafini R2D2 GC, Serafini GC accs 18 bass

Stockaryd

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 255
Re: Castagnari glue
« Reply #28 on: December 18, 2017, 11:05:22 AM »

Nice song,  I know the melody, I use to play like that . . . . . . .  and OH, . .   I forgot the pike   ;) 
Logged
Hohner Corso, Hohner Erica, Emmanuel Pariselle, Gessner,   Koch,   Mariotti,    "China  NoName",   4 Toy,     -and now some more

melodeon

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1732
Re: Castagnari glue
« Reply #29 on: December 18, 2017, 03:29:32 PM »

Playandteach..

That certainly tipped the scale.
Logged

Nick Collis Bird

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3785
  • Been squeezing melodeons for over 48 years (badly)
Re: Castagnari glue
« Reply #30 on: December 18, 2017, 05:44:04 PM »

Although we’ve moved away from the OP. If you find “hoof and Horn” too brittle, a touch of Geletin can be added. Likewise if the book or instrument is heading for insect ridden countries add some Thymol. Available from Bee keeping suppliers.
Logged
Has anyone heard of the song. “ Broken Alarm-clock Blues” ? It starts   â€œI woke up this Afternoon”
Pages: 1 [2]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal