Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: 1 [2] 3   Go Down

Author Topic: wood type influence sound?  (Read 15083 times)

0 Members and 1 Guest are viewing this topic.

HallelujahAl

  • Guest
Re: wood type influence sound?
« Reply #20 on: August 09, 2009, 07:37:03 PM »

Quote
They don't grow on trees you know!
Ah, a melodeon tree...the stuff of dreams :D
Logged

melodeon

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1732
Re: wood type influence sound?
« Reply #21 on: August 09, 2009, 11:40:58 PM »

I have pondered the question  of

Why do melodeon makers  NOT use "boxwood" ?
Logged

melodeon

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1732
Re: wood type influence sound?
« Reply #22 on: August 10, 2009, 04:04:43 AM »

so much for levity
Logged

xgx

  • Bagpipes & Musette Boxes... and Banjos, luv 'em!
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1157
Re: wood type influence sound?
« Reply #23 on: August 10, 2009, 08:24:43 AM »

you could use dogwood but you'd probably be barking :P
Logged
Graham

Socio-Demographic:   Graduate, Coffin Dodger
 Location: N Cambs/S Lincs - UK

HallelujahAl

  • Guest
Re: wood type influence sound?
« Reply #24 on: August 10, 2009, 08:45:47 AM »

I've no idea where to find it again on the world wide interweb thingy - but I did happen across a Steirische manufacturer making the boxes out of some kind of carbon fibre material once - looked really good - well looked expensive anyway!
AL
Logged

rees

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 5055
  • Windjammer
    • Wesson Accordions
Re: wood type influence sound?
« Reply #25 on: August 10, 2009, 11:14:17 AM »

Martyn Banks of Oakwood and I were talking at Sidmouth about the possibilities of building a melodeon from 16 gauge stainless steel. Watch this space.
Logged
Rees Wesson (accordion builder and mechanic)
Gungrog, Welshpool, Wales, UK
www.melodeons.com

HallelujahAl

  • Guest
Re: wood type influence sound?
« Reply #26 on: August 10, 2009, 11:53:54 AM »

Ah here they are - it was as I thought Strasser who now produce a Carbon Creative Model. Link should take you to correct page - but my German's a bit doggy!

AL

nein. nein, nein! I meant Dodgy!
« Last Edit: August 10, 2009, 11:57:33 AM by HallelujahAl »
Logged

Chris Ryall

  • "doc 3-row"
  • French Interpreter
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 11153
  • Wirral UK
    • Chris Ryall
Re: wood type influence sound?
« Reply #27 on: August 10, 2009, 11:59:00 AM »

Colin Dipper once told me he'd experimented with aluminium blocks. I have'nt actually seen such a beast, but '..been waiting for my dipper for many years now ..  ...."  ::)

Anyone else?  (and sincere apologies for that 'lumber' joke)
Logged
  _       _    _      _ 

TomB-R

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 598
Re: wood type influence sound?
« Reply #28 on: August 10, 2009, 01:19:55 PM »

Ah here they are - it was as I thought Strasser who now produce a Carbon Creative Model.

Worth watching the video through on the Strasser site, some interesting making footage.  Some speedy tuning of those big reeds with a Dremel type tool!
Thanks Al
Tom
Logged

Malcolm Austen

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 495
  • any old hohner
Re: wood type influence sound?
« Reply #29 on: August 10, 2009, 04:11:15 PM »

A lot of this was covered in this thread.
Logged
aka malodeon

IanD

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1703
  • Too many melodeons...
Re: wood type influence sound?
« Reply #30 on: August 10, 2009, 06:20:06 PM »

Surely almost every part of the construction contributes to the sound. You could probably argue round or triangular strap brackets would because of the difference in mass effecting the vibration of the casing, but the effect of this sort of stuff pales in comparison to changes that occur between players, playing outdoors etc.

This has been argued to death several times...

Comparisons with stringed instruments (guitars, violins) are completely spurious, the mechanisms of sound generation and propagation are totally different.

Anyone who insists that the wood that (for example) the case of a melodeon is made of has a big effect on the sound -- through vibration or otherwise -- should try the following experiment :

Using a small microphone placed close to the body, measure how much sound is radiated from the body as opposed to out through the grille into the air.
(you will have to shield the sound radiation from the grille to make this measurement possible).

You'll find that the relative sound level is negligible (maybe 30dB down or more) -- which is as it should be for a free-reed instrument designed to put as much sound as possible into the air, not its own bodywork. Any sound this far below the direct radiated sound *will* be inaudible -- look up references on acoustic masking if you don't believe me, you're relying on this every time you listen to an MP3 file.

Pretty much the same argument applies for a "soundboard" which is rigidly fastened to the case and braced against several rather rigid reedblocks.

Anything which does lead to resonances in the body/reedblocks/"soundboard" is far more likely to screw up the sound than enhance it; the usual conclusion drawn by people who've really looked into this is that all these should be as rigid and non-resonant as possible to absorb the minimum of energy from the vibrating reed, which is in direct opposition to what is desirable in stringed instruments.

(this is one reason you'll often find a metal strap linking the treble reedblocks -- this help stop reedblock resonances triggered by the reeds, which sometimes means that some reeds don't want to sound properly -- as I found when I forgot to put it back in one of my boxes)

Ian

P.S. The shapes of the *holes* in said wood, the various cavities inside the box, and anything that affects how the sound from the reeds escapes to the outside world -- that's different, these do have a big effect, they're in the acoustic path from the reeds to the ear.
Logged
Oakwood Model 4 D/G, Castagnari Dony D/G/#, Castagnari Tommy G/C, Baffetti Binci D/G, Hohner Preciosa D/G, Melos Bb/Eb, Lightwave SL5 and Kala California fretless basses

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: wood type influence sound?
« Reply #31 on: August 10, 2009, 06:26:34 PM »

I've no idea where to find it again on the world wide interweb thingy - but I did happen across a Steirische manufacturer making the boxes out of some kind of carbon fibre material once - looked really good - well looked expensive anyway!
AL

Met a guiy with a carbon fibre guitar in a folk club. He said it was really good, loud, stays in tune, can be played in the rain with no worries. Sounded good to me as far as guitars go  ;)

HallelujahAl

  • Guest
Re: wood type influence sound?
« Reply #32 on: August 10, 2009, 07:00:30 PM »

Quote
Met a guiy with a carbon fibre guitar in a folk club. He said it was really good, loud, stays in tune, can be played in the rain with no worries. Sounded good to me as far as guitars go
In fact it's the perfect instrument for Morris dancing!
 >:E
Logged

Owen Woods

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3894
  • melodeonmusic.com
    • The website and blog of Owen Woods
Re: wood type influence sound?
« Reply #33 on: August 10, 2009, 07:07:56 PM »

An interesting question. People have been asking the same thing with regards wind instruments and the conclusion I believe is much the same.

The overriding factor in determining the sound of a melodeon is of course the reeds. Then there is the internal geometry, both of the reedblock cavity and the 'soundbox'. After these the other factors are relatively negligable. I expect that resonance could be a problem, it often is, but setting aside that, the vibration of the body is probably negligable and probably detrimental.
Logged
Bergflodt D/G 4 voice, Saltarelle Bouebe D/G, Super Preciosa D/Em, Hohner Impiliput B/C+C#

Latest blog post: In Any Weather

http://melodeonmusic.com/blog

waltzman

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 943
Re: wood type influence sound?
« Reply #34 on: August 10, 2009, 07:52:51 PM »

A lot of this was covered in this thread.

thanks for this.  I had forgotten about this thread.  I found Mr. Hyde's comments particularly helpful.  If anyone is in a position to determine the effect of different woods on the sound of an accordion, he is.
Logged

risto

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 317
Re: wood type influence sound?
« Reply #35 on: August 10, 2009, 08:11:12 PM »


.... the vibration of the body is probably negligable and probably detrimental.


If the reeds of an accordion were heavier then, first the geometrical measures would affect and then the wood type or other materials used. Take a tuning fork and make it vibrate, you hear almost nothing. Then set the end of the fork on a table or piece of wood and suddenly you hear the sound. The mass of a reed is much smaller than in a tuning fork and thus also the energy in the vibration is smaller. Small mass of the reeds makes them have less vibrating energy and energy is required to produce sound in the casing - but in some very small scale this still probably happens. Testing with a tuning fork you will also see how important it is that the fork is firmly pressed on the soundboard - not so with waxed reed plates. You can also make the conclusion that the way the reeds blocks are fixed onto the soundboard, and further, how the soundboard is fixed in the frame, play a role how the vibration is able to travel. So I would say that the sound the reeds themselves are producing - and which sound travels out from the cabinet thru the airholes - plays clearly the main role both in volume and tone.
Logged
Paolo Soprani 5-row, Roland FR1B-digital CBA button accordion. Guitar, 5-string OT banjo, mandolin, piano...
My one man band recording: https://apari.fi/Bonaparte_Crossing_The_Rhine_Risto.mp3

waltzman

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 943
Re: wood type influence sound?
« Reply #36 on: August 10, 2009, 11:17:34 PM »

Surely almost every part of the construction contributes to the sound. You could probably argue round or triangular strap brackets would because of the difference in mass effecting the vibration of the casing, but the effect of this sort of stuff pales in comparison to changes that occur between players, playing outdoors etc.




Pretty much the same argument applies for a "soundboard" which is rigidly fastened to the case and braced against several rather rigid reedblocks.

Anything which does lead to resonances in the body/reedblocks/"soundboard" is far more likely to screw up the sound than enhance it; the usual conclusion drawn by people who've really looked into this is that all these should be as rigid and non-resonant as possible to absorb the minimum of energy from the vibrating reed, which is in direct opposition to what is desirable in stringed instruments.

(this is one reason you'll often find a metal strap linking the treble reedblocks -- this help stop reedblock resonances triggered by the reeds, which sometimes means that some reeds don't want to sound properly -- as I found when I forgot to put it back in one of my boxes)

I think it is more accurate to say that resonances in the body/reedblocks/"soundboard" MAY screw up the sound.  If you argue that they do not generally enhance the sound then why would a hand made Costalottie sound better than a chinese instrument with the same reeds?  I think the reedblock construction and reed attatchment are probably the most important elements of those mentioned (besides the reeds themselves).
Logged

rees

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 5055
  • Windjammer
    • Wesson Accordions
Re: wood type influence sound?
« Reply #37 on: August 11, 2009, 12:01:29 AM »

Excuse me. Where does it say that a hand-made instrument (I refuse to use the word "costalotti") sounds better than a Chinese instrument with the same reeds?  ???
Logged
Rees Wesson (accordion builder and mechanic)
Gungrog, Welshpool, Wales, UK
www.melodeons.com

melodeon

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1732
Re: wood type influence sound?
« Reply #38 on: August 11, 2009, 12:55:01 AM »

I believe that is found in the book of knells


Density  of the various pieces of wood used may make a difference as wood the surface of those  pieces...
note that when I described the best accordion I have played.. it was rough internally

And on a side note, many of the pre-war guitars made in America, and highly revered ,and obscenely valued ,were production line  made and you can see the saw marks on the backs and sides and braces..

Also Hohner uses aluminum reed "blocks" ( combs) on their Meisterklass instruments and yes the tone is different  and for years they dealt with varying degrees of oxidation..

As to carbon fibtre.. yes there are some guitars made wth carbon fibre, such as Rainsong, and there is a mandolin maker currently invloved in opproduction CF  units
Neither of these brands has caused an even modest shift of the instrument industry to carbon fibre..perhaps in the future...

Metal bodied accordeons.. I belive Bruno Priez has already been there.....
« Last Edit: August 11, 2009, 02:01:30 PM by melodeon »
Logged

waltzman

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 943
Re: wood type influence sound?
« Reply #39 on: August 11, 2009, 12:56:20 AM »

Excuse me. Where does it say that a hand-made instrument (I refuse to use the word "costalotti") sounds better than a Chinese instrument with the same reeds?  ???

Quite right.  I should have said 'different' not 'better'.
Logged
Pages: 1 [2] 3   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal