Last week I found an old Hohner Comet for sale, and obtained it for $12. I couldnt resist. Turns out that it has seen some very heavy play from its former owner in the UK, but it is still is remarkable tune. While not typically in the habit of playing used harps, it seems a waste to resign it to my collection shelf and so I would like to rehab it.
I have some old threads about harp rehab, and I've done a but of tuning correction and gap setting on other harps in the past, but the Comet presents some special challenges I thought could benefit from fresh advice. Also, only fitting that we have a thread about the octave tuned Comet!
Chiefly, it needs deep cleaning but secondly, it seems that the draw reeds of the low octave are slapping the cover and buzzing. All is well when the cover is off but when it goes back on, ilthe low reeds buzz metallically on the draw above Hole 4. Also, I think this coukd be a gapping/tolerance issue. I pinged each reed and slid a sheet of Mylar under each one up to the end to try and remove some of the sediment and corrosion there. Photos attached.
My questions: How would you handle this? Can I soak the comb and plates to loosen the gunk? And how about that tricky buzzing? I am interested in any and all feedback and happy to post more photos.
Cheers,
Chris
Edit: trying to post some detailed photos but my phone is being a jerk. Also trying to get a video of the buzz going.