Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Hohner Thumb Strap  (Read 3376 times)

0 Members and 1 Guest are viewing this topic.

Cam Button

  • Good talker
  • **
  • Offline Offline
  • Posts: 65
Hohner Thumb Strap
« on: December 23, 2017, 04:30:57 AM »

Hello awesome Melodeon folk. The thumb strap for my Hohner 113 has snapped. The retaining hardware for the leather looks like a rivet.

Should I remove the wooden keyboard to cut the hardware out, or install new retaining hardware next to the old attachment point? This box is old, so I don't know if the keyboard will survive re installation.

I'd like to thank the forum members for sharing their knowledge.

Merry Christmas

Cam
Logged

rees

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 5055
  • Windjammer
    • Wesson Accordions
Re: Hohner Thumb Strap
« Reply #1 on: December 23, 2017, 06:07:00 PM »

The best method is to remove the keyboard and drill out the rivets.
A new thumb-strap can be fitted using pop-rivets but make sure to use washers on the rivets to avoid splitting the wood.
Logged
Rees Wesson (accordion builder and mechanic)
Gungrog, Welshpool, Wales, UK
www.melodeons.com

Cam Button

  • Good talker
  • **
  • Offline Offline
  • Posts: 65
Re: Hohner Thumb Strap
« Reply #2 on: December 23, 2017, 06:24:30 PM »

Thanks
Logged

syale

  • The Terrier
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 711
  • When will this MADness stop?
Re: Hohner Thumb Strap
« Reply #3 on: December 23, 2017, 08:09:21 PM »

I used some screw posts, see here; http://forum.melodeon.net/index.php?topic=15204.0
Logged
HA114 C/G/A/D, 2915 G/C. Liliput, Club IIB C/F Dino Baffetti Modell 22 B Twitter: @syale

rees

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 5055
  • Windjammer
    • Wesson Accordions
Re: Hohner Thumb Strap
« Reply #4 on: December 23, 2017, 09:25:14 PM »

Yes, those would do the job nicely. Search eBay for Chicago Screws.
Logged
Rees Wesson (accordion builder and mechanic)
Gungrog, Welshpool, Wales, UK
www.melodeons.com

melodeon

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1732
Re: Hohner Thumb Strap
« Reply #5 on: December 24, 2017, 12:56:01 AM »

Yes, Chicago screws, the correct name.

"The best method is to remove the keyboard and drill out the rivets.
A new thumb-strap can be fitted using pop-rivets but make sure to use washers on the rivets to avoid splitting the wood."

Presuming plastic, not wood.  ( though I have not seen a plastic keyboard 113)

Or, throw the thumb  strap away,. get a single shoulder strap,  and learn to play with the thumb on the end of the keyboard allowing full movement of the hand and fingers.

Or alternatively, get a proper keyboard with a thumb groove.

Yer welcome.

Logged

triskel

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3290
Re: Hohner Thumb Strap
« Reply #6 on: December 24, 2017, 02:56:43 AM »

... throw the thumb  strap away,. get a single shoulder strap,  and learn to play with the thumb on the end of the keyboard allowing full movement of the hand and fingers...

...and immediately get disqualified from an All-Ireland melodeon competition ...  :(

melodeon

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1732
Re: Hohner Thumb Strap
« Reply #7 on: December 24, 2017, 04:50:15 AM »

Oh!  The shame of it all.

Learning to play without "rules".
Logged

Rog

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2525
  • Repair and tuning in Hants
Re: Hohner Thumb Strap
« Reply #8 on: December 24, 2017, 06:41:10 AM »

The rivet lines up with one of the button holes, which means you can get to both sides of the fastening and replacing with new strap and (black) rivet is (in my view) the best option, to retain the original look. It might not seem it at first, but drilling out and rerivetting is also easier than messing about with screws/bolts etc. You just need a rivet punch and something hard to place under the rivet when flattening it out (like a lump of metal). You insert the punch through the button hole. Charlie sells the thumb straps with suitable rivet. As long as you are careful and don't over cook the hammering, you won't damage the keyboard. In fact the trickiest bit is getting the keyboard on and off.

Winston Smith

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4066
  • AKA Edward Jennings
    • "Our Luxor B&B" Luxor life, slice by slice.
Re: Hohner Thumb Strap
« Reply #9 on: December 24, 2017, 06:45:48 AM »

Or, if you have thumbs which don't appreciate the pressure.........modify your keyboard accordingly, so that your palm takes the load.
« Last Edit: December 24, 2017, 06:47:24 AM by Edward Jennings »
Logged
At last, broken and resigned to accept conformity.
Oh, how I LOVE Big Brother!

triskel

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3290
Re: Hohner Thumb Strap
« Reply #10 on: December 24, 2017, 08:33:13 PM »

Oh!  The shame of it all.

Learning to play without "rules".

Actually, I don't know if that rule still applies, I haven't been to any competitions in a long time, but I did once witness somebody getting disqualified for that reason. But some of us (including your "favourite" accordion maker in Louisianna, who didn't even have any shoulder straps for sale in his shop when I collected my Acadian off him) actually like the anchor of a thumb strap.

And, as I've just commented on a parallel thread:
I play my Hohner one-rows with my fingers flattened across the buttons to avoid this problem ...

Same here, or on a handmade Cajun box, or my 1920's Globe "Gold Medal".

It just doesn't feel "right" to me if there's a stop on the buttons of a German-style 10-key melodeon...  ???

Indeed I'd think of melodeons and button accordions as related species whilst celebrating/embracing the differences between them - I'd rather have a full-blooded melodeon that's not been tamed and watered down into a regular button box (like the Castagnari one has been).  ;)

tirpous

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1403
Re: Hohner Thumb Strap
« Reply #11 on: December 25, 2017, 06:11:45 PM »

It's easier to like a thumb strap when it is properly adjusted, and this takes a fair amount of experimentation.  Thumb behind the keyboard or on top, etc...  I vote for the Chicago bolts.

With a thumb strap you have the option of pumping the bellows from the left, from both sides or from the right (treble) side.  Pumping from the right makes it easier to synchronize notes and bellows movement in fast in-and-out passages.  IMO, of course   ;)

Logged
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal