Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: FISA (Scandalli) treble action spacers  (Read 1958 times)

0 Members and 1 Guest are viewing this topic.

syale

  • The Terrier
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 711
  • When will this MADness stop?
FISA (Scandalli) treble action spacers
« on: January 15, 2018, 04:34:19 AM »

Looking for some spacers. Dependent on price and shipping. I am located in Texas, USA. The spacer is 3/4" diameter 9/32" thick with a 1/8" hole in the centre.

There were some missing when I picked up the box from ebay and because of this some are worn in the center hole that the rod passes through. I need about 10. If anyone has any for sale at a reasonable price please let me know where to find. My alternative is to buy some PTFE (teflon) rod and part off some disks with an 1/8" hole in the centre, however with no lathe I would have to get a machine shop to knock them up for me.

Stephen
« Last Edit: January 15, 2018, 04:36:12 AM by syale »
Logged
HA114 C/G/A/D, 2915 G/C. Liliput, Club IIB C/F Dino Baffetti Modell 22 B Twitter: @syale

pgroff

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1827
Re: FISA (Scandalli) treble action spacers
« Reply #1 on: January 15, 2018, 12:56:13 PM »

Hi Stephen,

As you know, I have an incomplete one of these instruments in "parts donor" condition. When I get a chance, I'll get mine out and send you some pics. Might make sense to mate up these two instruments if you do hope to restore that one fully. It'll take time, materials, and skilled work to make replacement parts for yours, that might well exceed what you paid for the project. As often, the initial purchase price can be the tip of the iceberg in terms of the investment (parts and time) needed to restore an old instrument. Of course that doesn't mean it's not worth doing!

PG
Logged

Nick Collis Bird

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3785
  • Been squeezing melodeons for over 48 years (badly)
Re: FISA (Scandalli) treble action spacers
« Reply #2 on: January 15, 2018, 01:49:14 PM »

Ha! Let’s take the example of the Million Dollar Organette, and YOU started it Syale.  :D :o 8)
Edited to say, it was a brilliant journey though and there now exists a bloody rare and very playable instrument.
« Last Edit: January 15, 2018, 01:51:51 PM by Nick Collis Bird »
Logged
Has anyone heard of the song. “ Broken Alarm-clock Blues” ? It starts   â€œI woke up this Afternoon”

syale

  • The Terrier
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 711
  • When will this MADness stop?
Re: FISA (Scandalli) treble action spacers
« Reply #3 on: January 15, 2018, 02:01:50 PM »

Hi Stephen,

As you know, I have an incomplete one of these instruments in "parts donor" condition. When I get a chance, I'll get mine out and send you some pics. Might make sense to mate up these two instruments if you do hope to restore that one fully. It'll take time, materials, and skilled work to make replacement parts for yours, that might well exceed what you paid for the project. As often, the initial purchase price can be the tip of the iceberg in terms of the investment (parts and time) needed to restore an old instrument. Of course that doesn't mean it's not worth doing!

PG

 Thanks Paul! The price of the PTFE rod is $16 and being an ex Royal Navy artificer I am a dab hand on a lathe, if I had one! I looked at local Maker workshops and $50 per month is reasonable if I had more stuff to do but... I haven't right now.
Logged
HA114 C/G/A/D, 2915 G/C. Liliput, Club IIB C/F Dino Baffetti Modell 22 B Twitter: @syale

syale

  • The Terrier
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 711
  • When will this MADness stop?
Re: FISA (Scandalli) treble action spacers
« Reply #4 on: January 15, 2018, 02:05:49 PM »

Ha! Let’s take the example of the Million Dollar Organette, and YOU started it Syale.  :D :o 8)
Edited to say, it was a brilliant journey though and there now exists a bloody rare and very playable instrument.

I am happy that you are happy Nick!

Stephen
Logged
HA114 C/G/A/D, 2915 G/C. Liliput, Club IIB C/F Dino Baffetti Modell 22 B Twitter: @syale

Nick Collis Bird

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3785
  • Been squeezing melodeons for over 48 years (badly)
Re: FISA (Scandalli) treble action spacers
« Reply #5 on: January 15, 2018, 02:16:31 PM »

Cheers Stephen
Logged
Has anyone heard of the song. “ Broken Alarm-clock Blues” ? It starts   â€œI woke up this Afternoon”

melodeon

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1732
Re: FISA (Scandalli) treble action spacers
« Reply #6 on: January 15, 2018, 02:20:23 PM »

Get the rod and have a lathe operator, such as a gunsmith, bore a hole and then figure a way to slice off discs.
How about a local college or high school with an industrial skills/fabrication department. ?
Logged

syale

  • The Terrier
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 711
  • When will this MADness stop?
Re: FISA (Scandalli) treble action spacers
« Reply #7 on: January 15, 2018, 04:31:46 PM »

Get the rod and have a lathe operator, such as a gunsmith, bore a hole and then figure a way to slice off discs.
How about a local college or high school with an industrial skills/fabrication department. ?

If I were doing it, I would put the rod in the chuck, Place a 1/8" drill bit in the tailstock and bore in to the rod to the cutting length of the bit. Using a parting off tool I would slice of a 9/32" piece of it. Repeat till I have what I want using the drill bit as i work down the rod (Don't need to drill after every piece, only when the bottom of the hole can be seen). I would have to keep moving the rod in the chuck so I don't have a huge length sticking out and wobbling. Speed and feed is high for PTFE (teflon) . It's a very simple thing to do with the right tools!

Stephen
Logged
HA114 C/G/A/D, 2915 G/C. Liliput, Club IIB C/F Dino Baffetti Modell 22 B Twitter: @syale

triskel

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3290
Re: FISA (Scandalli) treble action spacers
« Reply #8 on: January 15, 2018, 05:32:19 PM »

Aragh! Don't remind me, I've got a "project" one of these to fix too, though it says Casali on my (23-key, 3-voice) one and I've got all the spacers.

I guess the one you got must be the 21-key (2-voice?) "alligator-skin" one that I saw on eBay recently? I've always felt that grille didn't make sense (on all the other examples I'd seen) without a badge in the middle of it, but I think the round "FISA" logo there finishes it off neatly - like that's what it was designed for, and probably was...

Presumably these must have been some of the first products of FarFISA (long before they ever made organs), after it was set up in Osimo by Silvio Scandalli in 1946, and hence they're sometimes to be found badged "Scandalli", "Casali", or "Brindisi" etc.?

syale

  • The Terrier
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 711
  • When will this MADness stop?
Re: FISA (Scandalli) treble action spacers
« Reply #9 on: January 16, 2018, 12:38:29 AM »

I guess the one you got must be the 21-key (2-voice?) "alligator-skin" one that I saw on eBay recently? I've always felt that grille didn't make sense (on all the other examples I'd seen) without a badge in the middle of it, but I think the round "FISA" logo there finishes it off neatly - like that's what it was designed for, and probably was...

I did get it in all its crackle paint glory. here is a pic of a cleaned up grill  (:)

Stephen
Logged
HA114 C/G/A/D, 2915 G/C. Liliput, Club IIB C/F Dino Baffetti Modell 22 B Twitter: @syale

triskel

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3290
Re: FISA (Scandalli) treble action spacers
« Reply #10 on: January 16, 2018, 03:52:11 PM »

I did get it in all its crackle paint glory. here is a pic of a cleaned up grill  (:)

Looks much better already!
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal