Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: FISA (Scandalli) Bass/Chord reeds  (Read 2319 times)

0 Members and 1 Guest are viewing this topic.

syale

  • The Terrier
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 711
  • When will this MADness stop?
FISA (Scandalli) Bass/Chord reeds
« on: January 24, 2018, 04:25:22 AM »

When i received the box, lots of reeds were rattling around in it and nearly all of them were the bass / chord reeds. I have figured out where all the treble reeds go but the bass / chord reeds, because of my lack of musical knowledge, (I play by ear) have me flummoxed. I have pinged them listening with DA tuner (Android App) and although they are off they me be enough to work on to discover which reed goes where. I have created a document indicating what happens when I press the bass / chord buttons and which pallets they open.

The tuning is C/F with accidentals 3rd button start

In this thread (5th post); http://forum.melodeon.net/index.php/topic,19051.0/topicseen.html Steve uploaded a document to describe how to remove the thirds for a D/G Hohner.

My PDF document is here; https://1drv.ms/b/s!Al-Lrc0pwoqO-i_o5upL9rQ0ewcb

I used the concept of the document as to how to ask my question; what reeds go in which reed blocks for my box? The other question is if I wanted to tape off the thirds, which reeds do I tape off?

The large reeds are as follows (remember they may/will be off from a tuning perspective, I only wrote what I saw on the tuner). These reeds fit in the blocks at the top of the picture in the attachment;

1. F#2 - D2
2. B2 - B2
3. A#2 - E2
4. D2 - G#2

5. C#3 - G#3
6. B3 - B3
7. A#3 - D#3
8. C#3 - F#3

The smaller reeds are as follows (remember they may/will be off from a tuning perspective, I only wrote what I saw on the tuner). These reeds fit in the blocks at the bottom of the picture in the attachment;

1.  D#4 - A#3
2.  D4 - A4
3.  E4 - B3
4.  C4 - F4
5.  C4 - F4
6.  F4 - A#3
7.  A3 - E4
8.  F#4 - F#4
9.  G4 - C4
10. D4 - G4
11. A#4 - A#4
12. D4 - D4
13. C5 - G5
14. B3 - B3
15. C#4 - G4
16. C#4 - F#4

Stephen
« Last Edit: January 24, 2018, 04:30:47 AM by syale »
Logged
HA114 C/G/A/D, 2915 G/C. Liliput, Club IIB C/F Dino Baffetti Modell 22 B Twitter: @syale

pgroff

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1827
Re: FISA (Scandalli) Bass/Chord reeds
« Reply #1 on: January 24, 2018, 12:46:05 PM »

Hi Stephen,

OK. If your melody side is truly in the keys of CF, and if you have one of the common bass layouts for Italian boxes from this period in CF, I'm going to speculate that your tuner is not giving you reliable pitch results for your bass and harmony reeds, the way you're sounding the reeds.

For example, I'm going to guess that the bass reeds you describe as "B / B"  are intended to sound Bb/Bb (at the same pitch at which the melody reeds sound a "C" row and an "F") row. Your "F#/F#" harmony reedplates may be intended to sound F/F. The "D/D" reedplates might be correct though. Learn from that example that many (but not all) of your other measured notes may be inaccurate (at the pitch in question).

Here are the  Basses and Triads you are likely to have for a CF box like this  (shown as "press  / draw"):

C major / G major
F major / C major
Bb major / Bb major     (some boxes might have F major / Bb major or Eb major / Bb major, but clue is the so-called "B/B" reeds)

And the final pairing can be various but likely possibilities would include:

A major / D major

or

A major / D minor


Here are the reedplates you might find for each of the above possibilities:

C/G  basses,   then, a set of harmony (triad) reedplates that provide C, E, G on the press and G, D, B on the draw
F/C  basses,     then a set of harmony (triad) reedplates that provide F, A, C on the press  and C, E, G on the draw
Bb/Bb basses,   then a set of harmony (triad) reedplates that provide   Bb/ Bb,  D/D, and F/F

Then possibly:

A/D basses,   then a set of harmony (triad) reedplates that provide A, C#, E on the press and D, F#, A on the draw

or possibly:

A/D basses,   then a set of harmony (triad) reedplates that provide A, C#, E  on the press and D, F, A on the draw.


These are just guesses, but may be helpful. The exact notes that are paired (press / draw) on each of the harmony reedplates can vary, but in many Italian boxes from this period the thirds of the triad  (for example the notes E and B for Cmajor/Gmajor) will be paired on the same reedplate.

Also, your reedplate may have a notch or diagonal line or  other marking indicating "this side out" for the press reedtongues - or even little bits of wax on the edge of the reedplate may give you a clue "which side was out" when installed on the reedblock.

Finally, here are the thirds of the triads if you want to block them:

C major:  third is E
G major: third is B
F major: third is A
Bb major: third is D
A major: third is C#
D major: third is F#
D minor: third is F

If you find you have other chords instead, let us know & we can tell you which reedtongue to tape over.

On many Italian boxes from this period (unlike many Hohners) the thirds of the press and draw chords will be on the same reedplate, which is handy.

PG

Edited to change my guess on that likely "final pair" of basses and chords from E/A to A/D - after checking out some C/F Italian boxes from the 40s- 50s here.
« Last Edit: January 25, 2018, 01:23:32 AM by pgroff »
Logged

syale

  • The Terrier
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 711
  • When will this MADness stop?
Re: FISA (Scandalli) Bass/Chord reeds
« Reply #2 on: January 24, 2018, 06:10:17 PM »

Also, your reedplate may have a notch or diagonal line or  other marking indicating "this side out" for the press reedtongues - or even little bits of wax on the edge of the reedplate may give you a clue "which side was out" when installed on the reedblock.

Thanks Paul! so even the bass/chord reeds would have been installed notch out? I do recall seeing the notches(at work right now). This is like a 3D puzzle to me with no drawing but I will get there! I have done what I always do when stuck, I created a spreadsheet  (:)

Stephen
Logged
HA114 C/G/A/D, 2915 G/C. Liliput, Club IIB C/F Dino Baffetti Modell 22 B Twitter: @syale

triskel

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3290
Re: FISA (Scandalli) Bass/Chord reeds
« Reply #3 on: January 25, 2018, 12:55:27 AM »

... your reedplate may have a notch or diagonal line or  other marking indicating "this side out" for the press reedtongues ...

... so even the bass/chord reeds would have been installed notch out? ...

Or, if it had been made in the Scandalli factory, the reedplates would be stamped SCANDALLI - serving the same purpose:

syale

  • The Terrier
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 711
  • When will this MADness stop?
Re: FISA (Scandalli) Bass/Chord reeds
« Reply #4 on: January 25, 2018, 01:17:39 AM »

Nothing stamped Scandalli Stephen. There are notches, The Bb - Bb reed blocks are not notched but it doesn't matter which way they are!

Stephen
Logged
HA114 C/G/A/D, 2915 G/C. Liliput, Club IIB C/F Dino Baffetti Modell 22 B Twitter: @syale

pgroff

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1827
Re: FISA (Scandalli) Bass/Chord reeds
« Reply #5 on: January 25, 2018, 01:25:37 AM »

Stephen,

Please note that I've edited my post above, on reflection -  to change my guess about the most likely basses and triads for the 4th pair of buttons.

These are only guesses of course - there are many many bass layouts in such instruments, sometimes illogical to me.  And yes, when I've been in your position with many loose reeds on the left hand side it has been like a puzzle!

PG
Logged

boxcall

  • You got to love it!!!
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1801
Re: FISA (Scandalli) Bass/Chord reeds
« Reply #6 on: January 25, 2018, 01:35:35 AM »

PGroff's quote:
"Also, your reedplate may have a notch or diagonal line or  other marking indicating "this side out" for the press reedtongues - or even little bits of wax on the edge of the reedplate may give you a clue "which side was out" when installed on the reedblock."

I found when putting the reeds back in place on my recording king that the wax on the outside edge was a pretty good clue as to which side was out, not all the notches or slash marks were facing out on mine ( most where though)
It is a bit of a puzzle but should make sense when you get a few in the right place, kinda like sudoku.
Logged
Hohner 1040 C, Beltuna one row four stop D, O'Byrne Dewitt/ Baldoni bros. D/C#, Paolo soprani "pepperpot" one row D

Gena Crisman

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1108
  • 🇬🇧
Re: FISA (Scandalli) Bass/Chord reeds
« Reply #7 on: January 25, 2018, 05:12:14 AM »

Thanks Paul! so even the bass/chord reeds would have been installed notch out? I do recall seeing the notches(at work right now). This is like a 3D puzzle to me with no drawing but I will get there! I have done what I always do when stuck, I created a spreadsheet  (:)

I'd like to say that's a particularly impressive looking diagram. Good luck getting your reeds sorted! One thing that's helpful is they are clearly not shy about putting reeds on a plate that are fairly different pitches to one another, eg a C and a G on a single plate, so finding those that will go with the shared fun/chord pallet for the C/G buttons should be easy, as they'll be pairs of reeds that play only those notes, probably either in octave 3 or 4.

I was intrigued and had to have a go at solving the puzzle, and have put a guess solution up at here, but I would understand if you want to solve it yourself. pgroff's post upthread is what gave me all the information I used to make my guesses with in a process of elimination, and little things like remembering A# is Bb helped too. I didn't label exactly which reed would go there but I've naively assumed that that would be apparent once the constructs come together.
Logged

Rog

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2525
  • Repair and tuning in Hants
Re: FISA (Scandalli) Bass/Chord reeds
« Reply #8 on: January 25, 2018, 12:47:03 PM »

Working out chord combinations/which note is the third etc.... I keep a Melodica in the workshop for this purpose... (:)

Pearse Rossa

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 723
Re: FISA (Scandalli) Bass/Chord reeds
« Reply #9 on: January 25, 2018, 01:34:51 PM »

I was doing something similar only recently.
I found this site and a piano to be very useful.
It's also very useful to have a tuning table to sound individual reeds.
Logged

syale

  • The Terrier
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 711
  • When will this MADness stop?
Re: FISA (Scandalli) Bass/Chord reeds
« Reply #10 on: January 25, 2018, 05:52:48 PM »

I was intrigued and had to have a go at solving the puzzle, and have put a guess solution up at here, but I would understand if you want to solve it yourself. pgroff's post upthread is what gave me all the information I used to make my guesses with in a process of elimination, and little things like remembering A# is Bb helped too. I didn't label exactly which reed would go there but I've naively assumed that that would be apparent once the constructs come together.

Many thanks Gena, I will take look tonight. I created the layout in PowerPoint. I will transfer to Google doc and share through my Google public folder



Stephen
« Last Edit: January 25, 2018, 05:59:25 PM by syale »
Logged
HA114 C/G/A/D, 2915 G/C. Liliput, Club IIB C/F Dino Baffetti Modell 22 B Twitter: @syale

syale

  • The Terrier
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 711
  • When will this MADness stop?
Re: FISA (Scandalli) Bass/Chord reeds
« Reply #11 on: January 25, 2018, 05:54:52 PM »

I was doing something similar only recently.
I found this site and a piano to be very useful.
It's also very useful to have a tuning table to sound individual reeds.

Thanks Pearse, my next project is a tuning table, after I clean the garage out!
Logged
HA114 C/G/A/D, 2915 G/C. Liliput, Club IIB C/F Dino Baffetti Modell 22 B Twitter: @syale

Pearse Rossa

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 723
Re: FISA (Scandalli) Bass/Chord reeds
« Reply #12 on: January 25, 2018, 06:36:11 PM »

.. my next project is a tuning table..

In the meantime.. if you have a bunch of loose reeds and need to figure what the notes are...
You can ping the reed tongue, match the note on a keyboard, and if you need to, use a tuner
to show what the note is.
Pinging a reed tongue directly to a tuner will not always give you an accurate reading.
If you don't have a piano or keyboard, you might have an accordion you can use for that purpose.
Logged

syale

  • The Terrier
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 711
  • When will this MADness stop?
Re: FISA (Scandalli) Bass/Chord reeds
« Reply #13 on: January 25, 2018, 07:48:48 PM »

.. my next project is a tuning table..

In the meantime.. if you have a bunch of loose reeds and need to figure what the notes are...
You can ping the reed tongue, match the note on a keyboard, and if you need to, use a tuner
to show what the note is.
Pinging a reed tongue directly to a tuner will not always give you an accurate reading.
If you don't have a piano or keyboard, you might have an accordion you can use for that purpose.

Great idea, I have a Casio keyboard upstairs with dust on it!
Logged
HA114 C/G/A/D, 2915 G/C. Liliput, Club IIB C/F Dino Baffetti Modell 22 B Twitter: @syale
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal