Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: re-using reeds  (Read 1447 times)

0 Members and 1 Guest are viewing this topic.

davidd

  • Member
  • *
  • Offline Offline
  • Posts: 44
re-using reeds
« on: January 29, 2018, 02:23:37 AM »

While I think that parting out a decent box seems a bit heartless, but would the reeds in this be suitable to use in converting an older Hohner Club box to a BC?
Would it be a big project or relatively straightforward?
Thanks, David
Logged

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: re-using reeds
« Reply #1 on: January 29, 2018, 08:29:03 AM »

My feeling is that old Hohner reeds can be of very good quality. It seems a shame to risk messing up a nice box and possibly nice reeds to convert from C/F to B/C when there are plenty of B/C boxes to be had.

 
Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk

Rog

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2525
  • Repair and tuning in Hants
Re: re-using reeds
« Reply #2 on: January 29, 2018, 11:25:14 AM »

You would need to try it to see how straight forward it would be. However it is a *lot* of work,  to deconstruct a set of reeds (remove them, clean them up, revalve them, clean the blocks, put it all back together, tune/trouble shoot). You'll get about a third of the way through and start to wonder what you have taken on. You may love it or it will cure you of ever wanting to do it again (:)
The alternative is to find a suitable BC box. At least you know all the reeds fit etc.
Also, if you have a Club box with a helper row...what would you put on the helper row?

rileycat

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 429
Re: re-using reeds
« Reply #3 on: January 29, 2018, 02:59:46 PM »

I've had reeds from an old Hohner 235/Morino transferred into an Erika C/F and it's made a nice instrument into a very nice instrument! IMHO a worthwhile expense/effort - work not done by me, I hasten to add.
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: re-using reeds
« Reply #4 on: January 29, 2018, 03:11:47 PM »

Of course the 235/Morino would have had Hohners very best reeds.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

davidd

  • Member
  • *
  • Offline Offline
  • Posts: 44
Re: re-using reeds
« Reply #5 on: January 29, 2018, 04:09:20 PM »

I kind of thought that stealing the reeds from one box to put in another might be a bit of a problem.  The low price did make me think, though.
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: re-using reeds
« Reply #6 on: January 29, 2018, 04:25:38 PM »

On the contrary if an old Hohner Club is otherwise past it the reeds will always be worth saving.  Whether it's worth converting a CF set to BC is another matter.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

jorden

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 108
Re: re-using reeds
« Reply #7 on: January 29, 2018, 04:31:54 PM »

You would need to try it to see how straight forward it would be. However it is a *lot* of work,  to deconstruct a set of reeds (remove them, clean them up, revalve them, clean the blocks, put it all back together, tune/trouble shoot). You'll get about a third of the way through and start to wonder what you have taken on. You may love it or it will cure you of ever wanting to do it again (:)
The alternative is to find a suitable BC box. At least you know all the reeds fit etc.
Also, if you have a Club box with a helper row...what would you put on the helper row?

You described exactly the position I found myself in! Especially the troubleshooting of the highest reeds. The main problem is that there is so many variables involved. Is the action working smoothly? Air-leakage? Are the reeds set properly? The tuning is the last of my worries. My next project will be something far simpler. Good working box which *only* :) needs revalving, refitting, resetting and tuning...
Logged
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal