Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Is it possible to change the soundboard in a paolo soprani?  (Read 2293 times)

0 Members and 1 Guest are viewing this topic.

fiachramp

  • Member
  • *
  • Offline Offline
  • Posts: 21
Is it possible to change the soundboard in a paolo soprani?
« on: February 06, 2018, 08:36:07 AM »

Hello there, I was wondering if anybody knows what the scope is for removing an aluminium soundboard from a 3 voice Paolo and putting a plywood one in is. I came across a discussion here from a few years back which mentions someone replacing a soundboard. http://forum.melodeon.net/index.php/topic,11013.msg170332.html#msg170332.

Regards
Fiachra
Logged

Winston Smith

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4066
  • AKA Edward Jennings
    • "Our Luxor B&B" Luxor life, slice by slice.
Re: Is it possible to change the soundboard in a paolo soprani?
« Reply #1 on: February 06, 2018, 09:43:24 AM »

Never even having seen a Paolo of any sort in the flesh, I'd still imagine that anything is possible if the will is there. But it certainly wouldn't be easy, requiring quite a bit of skill with small tools. For one thing, the ply will be thicker than the ali, and therefore wouldn't be a simple strip down of the boxwork and replacing like for like, the rebate would have to be widened, or cut the ali one out without stripping the casework, and devise and produce different mounting for the new ply one. Neither a task for the faint hearted.
Logged
At last, broken and resigned to accept conformity.
Oh, how I LOVE Big Brother!

fiachramp

  • Member
  • *
  • Offline Offline
  • Posts: 21
Re: Is it possible to change the soundboard in a paolo soprani?
« Reply #2 on: February 06, 2018, 11:13:30 AM »

Thanks for your reply Edward. It does seem like it would be a tricky job alright. I don't even know how the soundboard is attached to  the body, so I'm not going be attempting it anytime soon. But I am very curious about the  possibility of installing a plywood soundboard after reading the discussions here about the difference in quality between soundboards in older and newer Paolos.
Logged

Rog

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2525
  • Repair and tuning in Hants
Re: Is it possible to change the soundboard in a paolo soprani?
« Reply #3 on: February 06, 2018, 11:21:04 AM »

I tried to remove the aluminium soundboard from a Settimio Soprani PA (a small one). The register sliders were corroded in and solid and the instrument only fit for the skip, so I thought I'd see how..er..easily it could be removed. Answer: it's a bit like trying to remove a welded in floor panel from a car. There was a lot of collateral damage and in the end I concluded that it's not a practical option, esp as the world (in the case of PAs) is awash with PAs so it was easier to look out for one with working registers, than try and deconstruct/rebuild this one.

chris obrien

  • Member
  • *
  • Offline Offline
  • Posts: 20
Re: Is it possible to change the soundboard in a paolo soprani?
« Reply #4 on: February 06, 2018, 11:26:30 AM »

Yes its possible ,Nils Nielsen done one for me on a late 1950 4 voice paolo,in 1981
He cut a slot right down the back of the case which allowed him to slide the old knackered sound board out
and re fit a new aluminium board
Logged

triskel

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3290
Re: Is it possible to change the soundboard in a paolo soprani?
« Reply #5 on: February 06, 2018, 12:07:08 PM »

I think I'd start by questioning why you'd want to do such a thing Fiachra, when many of us have absolutely no problem with the sound of boxes with aluminium soundboards? I think in their search for "reasons" why the later Paolo Sopranis don't sound/play as well as older models, people have sought scapegoats, and blaming the soundboard is an easy one, but some of the best boxes I've ever played have had aluminium soundbords and I think it's a myth.

You know those wonderful old Baldoni, Bartoli Irish-American accordions, with 6 or 8 sets of reeds, and lots of rhinestones, from the 1930s? They've ALL got aluminium soundboards! My 4-voice grey Casali from the '40s (that's my avatar) has an aluminium soundboard, and has been described by Colm Gannon as "a box with b@lls!" And I'm presently restoring a 1949-50 Paolo Soprani "grey box" (only it's black - just like one that Jackie Daly played in De Dannan) that I've had to take the aluminium soundboard out of to sort out corrosion problems and seriously bodged repair attempts - but it'll be going back in there in the very near future! (I reckon the poor old thing got stored in a damp North Shore, Boston, basement - the bellows were rotten on it.)

As for getting it out - they were never designed for such a thing and the box was built around the soundboard - which is solidly fixed with (in this case rusted) screws and glued-in structural wooden blocks, so that the outer casework got cracked in the process...  :(

Are you sure you want to try it?  :-\

If you really don't like the sound of the box, maybe tuning it differently would be a much easier thing to try, or just trade it to get one you do like the sound of - because somebody else will probably love your one just the way it is!

fiachramp

  • Member
  • *
  • Offline Offline
  • Posts: 21
Re: Is it possible to change the soundboard in a paolo soprani?
« Reply #6 on: February 06, 2018, 01:56:06 PM »

Thanks again for all your great replies and insights. I should have said at the start that I love the box and I play it all the time. I just thought that if it was possible to change the soundboard it might give it an even better sound. I played a D/D# red recently almost identical to the one i have but it had a wooden soundboard(very similar to the one on the Cooley cd) and the sound was powerful. But I understand it's more than the soundboard that creates the sound.

I wasnt aware that the Baldoni's had aluminium soundboards Triskel. Is your black paolo the one jackie plays on cathal o searcaighs programme with frankie gavin and Alec Finn?
Logged

triskel

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3290
Re: Is it possible to change the soundboard in a paolo soprani?
« Reply #7 on: February 06, 2018, 03:13:49 PM »

Thanks again for all your great replies and insights. I should have said at the start that I love the box and I play it all the time. I just thought that if it was possible to change the soundboard it might give it an even better sound.

Which model is it? A photo would be great!

And how do you have it tuned?

Quote
I played a D/D# red recently almost identical to the one i have but it had a wooden soundboard(very similar to the one on the Cooley cd) and the sound was powerful. But I understand it's more than the soundboard that creates the sound.

Is it that you'd like to recreate Joe Cooley's box, because if it is then I've already been there, totally successfully (ask Des Mulkere!), and can tell you what I did.

Quote
Is your black paolo the one jackie plays on cathal o searcaighs programme with frankie gavin and Alec Finn?

It is, at least externally: Jackie Daly, Alec Finn and Frankie Gavin. Some of those, including one Charlie Harris has, have plywood soundboards, but mine's aluminium. Apparently Jackie converted his (from D/C# to C#/D) and added a third set of reeds to the D row (they were made as 2-voice boxes).

fiachramp

  • Member
  • *
  • Offline Offline
  • Posts: 21
Re: Is it possible to change the soundboard in a paolo soprani?
« Reply #8 on: February 06, 2018, 06:19:35 PM »

I'm trying to upload a picture here now but having some difficulties. It looks very similar to your one Triskel but only has one sort of curved shape cut out of the grill where as yours has two if that makes sense. The box is c#/d and i think its tuned 16+/0/16- but I'm not totally sure.

I would be looking for a Cooley sound from mine, its the only thing for it in my opinion.
Those are two lovely looking boxes. Did Charlie do the red D/D# for you?
Logged

triskel

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3290
Re: Is it possible to change the soundboard in a paolo soprani?
« Reply #9 on: February 06, 2018, 07:12:07 PM »

It looks very similar to your one Triskel but only has one sort of curved shape cut out of the grill where as yours has two if that makes sense. The box is c#/d ...

Is it the same as the one in my photo below? I ask because a friend of mine has one just like it, in C#/D and with an aluminium soundboard, and it's a fine box!

Quote
... i think its tuned 16+/0/16- but I'm not totally sure.

I would be looking for a Cooley sound from mine, its the only thing for it in my opinion.

It should be possible to achieve something closer to it if you got Charlie to widen the tuning some more (he's got the perfect one to gauge it from!), though not quite as much as on one with a ply soundboard because the aluminium ones tend to sound brighter anyway.

Quote
Those are two lovely looking boxes. Did Charlie do the red D/D# for you?

Thanks, though Charlie has the red one now because I wanted it to be played with Des as much as possible, while he's still active.

And yes, Charlie did the work, but what we did was a reed swap - exchanging a perfect, factory-tuned set of D/D# reeds, from a 1956 model I already had (second photo), with the B/C ones in a box that was otherwise the same as Joe Cooley's, and it worked perfectly! (In fact both boxes sounded better afterwards.)

Des' reaction was priceless - he didn't remember the model, but he knew the sound. Two bars into the first tune he was already saying "That sounds like Joe Cooley's box...", and at the end of the set "That sounds just like Joe Cooley's box! :o"

Edited typo, who stuck the r in beside the e?

gettabettabox

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 684
Re: Is it possible to change the soundboard in a paolo soprani?
« Reply #10 on: February 06, 2018, 10:25:28 PM »

Sounds like a horseshoe? Pic will confirm.
Logged

-Y-

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 896
  • Handry 18 (G/C), Mélodie (D), Club IIb (A/D)
    • a database of nearly 500 melodeons here
Re: Is it possible to change the soundboard in a paolo soprani?
« Reply #11 on: February 07, 2018, 09:02:16 AM »

I just thought that if it was possible to change the soundboard it might give it an even better sound.

Even if the soundboard does have an influence over the sound of accordions, the term can be misleading, particularly when / if one has in mind instruments such as violins or guitars, in which the soundboard acts as a resonator. The accordion being a wind instrument, the main resonator is… air. Which, of course, doesn't mean that it has no influence at all. I remember a workshop with Bernard Loffet, where he said that aluminum soundboards tend to give a more mellow sound, compared to wooden soundboards that can be possibly more punchy. At the time I felt it was very counter-intuitive. Perhaps other makers / tuners have different opinions (the quite empirical nature of accordion-related knowledge sometime leads to contradictory assessments).
That's one of the reason that led Thierry Benetoux in making plastic-body accordions : to prove the material has only minor (not meaning zero) influence over the accordion sound.

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: Is it possible to change the soundboard in a paolo soprani?
« Reply #12 on: February 07, 2018, 09:49:18 AM »

I just thought that if it was possible to change the soundboard it might give it an even better sound.

Even if the soundboard does have an influence over the sound of accordions, the term can be misleading, particularly when / if one has in mind instruments such as violins or guitars, in which the soundboard acts as a resonator. The accordion being a wind instrument, the main resonator is… air. Which, of course, doesn't mean that it has no influence at all. I remember a workshop with Bernard Loffet, where he said that aluminum soundboards tend to give a more mellow sound, compared to wooden soundboards that can be possibly more punchy. At the time I felt it was very counter-intuitive. Perhaps other makers / tuners have different opinions (the quite empirical nature of accordion-related knowledge sometime leads to contradictory assessments).
That's one of the reason that led Thierry Benetoux in making plastic-body accordions : to prove the material has only minor (not meaning zero) influence over the accordion sound.

We've covered this topic several times over the years on this forum. It's worth doing a 'google search' from the blue menu strip at the top of every page. Here's one of the latest threads.
http://forum.melodeon.net/index.php/topic,20748.msg249360.html#msg249360
Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk

-Y-

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 896
  • Handry 18 (G/C), Mélodie (D), Club IIb (A/D)
    • a database of nearly 500 melodeons here
Re: Is it possible to change the soundboard in a paolo soprani?
« Reply #13 on: February 07, 2018, 10:43:36 AM »

Thanks, Steve, interesting read here.  :||:

triskel

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3290
Re: Is it possible to change the soundboard in a paolo soprani?
« Reply #14 on: February 07, 2018, 11:53:17 AM »

... I remember a workshop with Bernard Loffet, where he said that aluminum soundboards tend to give a more mellow sound, compared to wooden soundboards that can be possibly more punchy. At the time I felt it was very counter-intuitive. Perhaps other makers / tuners have different opinions (the quite empirical nature of accordion-related knowledge sometime leads to contradictory assessments).

Interesting. Anybody I know is of the opposite opinion, and there's nothing remotely "mellow" about the sound of a 1930's Baldoni, Bartoli, nor my 1940's Casali, which I'd describe as sounding somewhere between a grey Paolo Soprani and a Baldoni, depending on how gently, or how hard you push it.

Whilst Charlie Harris reckons it better to put less tremolo on a box with an aluminium soundboard, because they sound too bright otherwise.

-Y-

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 896
  • Handry 18 (G/C), Mélodie (D), Club IIb (A/D)
    • a database of nearly 500 melodeons here
Re: Is it possible to change the soundboard in a paolo soprani?
« Reply #15 on: February 07, 2018, 12:07:48 PM »

I had a Saltarelle with nearly the same build dimensions, characteristics, and overall quality than my current Handry, and while having both an aluminum soundboard, the first was considerably brighter than the Castagnari, which is quite neutral in tone. So it may not entirely be dependent on that, although the experience of one person is not enough to infer a general law.
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal