Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Streb recording set-up settings?  (Read 1771 times)

0 Members and 1 Guest are viewing this topic.

Steve C.

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2075
  • Erica, Morse Anglo
Streb recording set-up settings?
« on: February 09, 2018, 05:08:49 PM »

Hello Streb owners--

Attached is a quick and dirty sample of Cork March on Streb.  Mory MM dry.  A little reverb. Bass/treble balance about 50/50.

Can I change my set up/settings to make the recording sound better?  (can't fix my playing at the moment!)

It is mono, run from Streb mono line-out through the pre-amp mic line-in, phantom power on, gain at about 2 o'clock, level at about 3 o'clock, compression at 12 o'clock.  Attached to Mac via USB, iMovie file (.mov).

https://youtu.be/2kiGR901uXw

I mean, I know I can't sound like Clive, but the "fidelity" itself seems lacking....

Appreciate any pointers, regards,

Steve C.
Logged
Located in Central North Carolina, USA; credit for picture: livingplanet.ca

Calum

  • Good talker
  • **
  • Offline Offline
  • Posts: 97
Re: Streb recording set-up settings?
« Reply #1 on: February 09, 2018, 06:48:44 PM »

Seems like the noise floor is quite high.  Maybe figure out where that's coming from?

Logged

streb

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 100
Re: Streb recording set-up settings?
« Reply #2 on: February 09, 2018, 07:52:28 PM »

Turn the phantom power off! It is possible but unlikely that will apply 48V across the eMelodeon output electronics. Boom.

The output is also Line Out so you should be sending it into the CD or AUX or Line In input, not a MIC input. The eMelodeon is essentially an electronic keyboard.

Nicely played on the video btw. The noise is not that high at all really. I have a Xenyx too and they are good little mixers but not known for their ultra low noise mic preamps. Ya pays ya money etc.

The sound is fine given that the instrument is after all in essence a melodeon sample playback synthesiser. Maybe what it lacks if anything is more assertive bellows dynamics - a bit more "oomph". Remember that you are operating pressure sensors and not real reeds and they won't respond as smoothly at very low bellows pressure. Turn the mixer input down a bit and increase the output volume of the melodeon. You have headphones in so I assume the internal speakers are muted. If it gets too loud through the cans, set the melodeon internal amp to off in the Instrument menu and plug the headphones into the mixer. If it sounds too loud when you push/pull the bellows hard then turn the input level down a bit on the mixer.

Steve
« Last Edit: February 09, 2018, 08:21:41 PM by streb »
Logged

george garside

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 5401
Re: Streb recording set-up settings?
« Reply #3 on: February 09, 2018, 08:12:20 PM »

'fidelity', '  noise floor'  .'compression'  etc  etc. Much as I would like a streb  it sounds like I would need to go on a 12 month course just to understand  how to operate one as opposed to actualy playing tunes on it.  Same goes for other electonic digital boxes.  Why can't they just have  knobs for volume, treble, bass,  and perhaps  4 different tuning setups  eg DG,CF. BC, and if 3 row BCC#   and leave the rest to the skill of the player.  Or is it just me getting old!

george :-[


 
Logged
author of DG tutor book "DG Melodeon a Crash Course for Beginners".

streb

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 100
Re: Streb recording set-up settings?
« Reply #4 on: February 09, 2018, 08:27:21 PM »

Why can't they just have  knobs for volume, treble, bass,  and perhaps  4 different tuning setups  eg DG,CF. BC, and if 3 row BCC#   and leave the rest to the skill of the player.

That is pretty much what it is. In fact the eMelodeon does not have treble and bass controls. Admittedly you do have to set it up the way you want it but after that it is just switch on and play.
Logged

Helena Handcart

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2452
  • Saltarelle Nell
Re: Streb recording set-up settings?
« Reply #5 on: February 09, 2018, 08:43:57 PM »

Why can't they just have  knobs for volume, treble, bass,  and perhaps  4 different tuning setups  eg DG,CF. BC, and if 3 row BCC#   and leave the rest to the skill of the player.

That is pretty much what it is. In fact the eMelodeon does not have treble and bass controls. Admittedly you do have to set it up the way you want it but after that it is just switch on and play.

Agreed. Very easy to use and will definitely not make up for lack of skill on the part of the player.  Squeezy gave me a quick tour of the controls when I picked it up and I was able to create my own patches straight away.

[Whoops, re-read this this morning and found I had missed  word 'not' from the last paragraph]
« Last Edit: February 10, 2018, 07:35:01 AM by Helena »
Logged
Saltarelle Le RomanĂ©  | Saltarelle Nuage | Oakwood | various elderly Hohners

Gena Crisman

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1108
  • 🇬🇧
Re: Streb recording set-up settings?
« Reply #6 on: February 09, 2018, 08:50:21 PM »

'fidelity', '  noise floor'  .'compression'  etc  etc. Much as I would like a streb  it sounds like I would need to go on a 12 month course just to understand  how to operate one as opposed to actualy playing tunes on it.  Same goes for other electonic digital boxes.  Why can't they just have  knobs for volume, treble, bass,  and perhaps  4 different tuning setups  eg DG,CF. BC, and if 3 row BCC#   and leave the rest to the skill of the player.  Or is it just me getting old!

Not to worry George, they're really just words for concepts you probably do understand: no need to worry about your age! You could probably learn everything you'd need to in 12 minutes:
  • Fidelity in this case could mean how accurate the Streb is reproducing the sound of the sampled instrument (the instrument it is playing electronic samples of as you play) - you would like a high fidelity, as that would mean it's really accurate in sounding like the Melodeon/Thing of your choice. It's also sometimes just used in lieu of 'sounds good', or the quality of sound that is produced - how close to ideal it is.
  • Noise Floor is talking about how loud the 'hiss' is on the output audio - the hiss is the 'noise', and your played audio is the 'signal'. A high Noise Floor is bad, because the hiss ends up being very audible to listeners: a low noise floor is better. In this case, Calum thinks there may be something in Steve's setup that is adding a hiss to the system, and that he should try and change it. All electronic sound systems will have noise on them at some point, it's just a case of ensuring it's so quiet no one can hear it, where possible at least.
  • Compression is (probably) to do with the dynamic range of the sounds that come out the instrument: how quiet the the quietest sounds and how loud the loudest sounds are compared to one another - high compression would mean that they are similar, low compression would mean that there is a big difference.
Realistically you could twiddle the few knobs that are there, and get a working understanding of how you'd want to use them very quickly. It's one of those things where there might be a right answer for you, and a different right answer for someone else. If the knobs weren't there, well, one of you'd be a bit stuffed.

(Disclaimer: never used/seen a streb)
Logged

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: Streb recording set-up settings?
« Reply #7 on: February 09, 2018, 08:54:55 PM »

'fidelity', '  noise floor'  .'compression'  etc  etc. Much as I would like a streb  it sounds like I would need to go on a 12 month course just to understand  how to operate one as opposed to actualy playing tunes on it.  Same goes for other electonic digital boxes.  Why can't they just have  knobs for volume, treble, bass,  and perhaps  4 different tuning setups  eg DG,CF. BC, and if 3 row BCC#   and leave the rest to the skill of the player.  Or is it just me getting old!

george :-[


But I want Bb/Eb and A/D, Oh! and for the lower keys I want 3rd button start and for the higher ones I want 4th button start, and I want to experiment with a number of different 1/2 row layouts etc etc.

Yes it is just you George  >:E

george garside

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 5401
Re: Streb recording set-up settings?
« Reply #8 on: February 09, 2018, 09:43:41 PM »

I'm the first to admit that is probably just me. I have  problems with all digital stuff  wonderous  as it may be!

George the luddite  ;)
Logged
author of DG tutor book "DG Melodeon a Crash Course for Beginners".

Steve C.

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2075
  • Erica, Morse Anglo
Re: Streb recording set-up settings?
« Reply #9 on: February 10, 2018, 01:15:20 PM »

Now I know, truly, why, I think it was MandoC (?) who said he never hooks his Streb up even to the eMelodeon software!  (tho I am pretty sure he does use an amp on it) (?)

I did not have much trouble with the software, which is magic.  I mean, you are trying to play a tune and it has a G# or some such in a low octave because you transposed it crazy from an ABC editor, but NOT TO WORRY, just go to eM and give yourself that note on the third row!  Push, pull, both, whatever!  Change your mind, take it back (but save it for later on PC...)  Magic.

But I am, as you can see, having a bit of a go with recording electronically.  The Mac is easy as pie connecting a Snowball USB to record a "real" melodeon.  But not so much with the electronic.

(Fortunately, Steve has adequate protected my circuit boards!  No boom has occurred.  Phantom power is banished.)

Will retry today and post another modest attempt.

Thanks and regards.
Logged
Located in Central North Carolina, USA; credit for picture: livingplanet.ca

Steve C.

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2075
  • Erica, Morse Anglo
Re: Streb recording set-up settings?
« Reply #10 on: February 10, 2018, 04:16:21 PM »

OK, try again.

Stereo connection from Streb via R and L line-out to Xenyx R and L line-in channel 2|3.  Level at 3 o'clock.  Compression at zero.  NO PHANTOM POWER.  Same USB connection to Mac/Photobooth.

This is poor attempt at Jody Kruskal's Hop and Skip but in G harmonic minor.  Mory swing voice.

Does this sound like it has more or less "noise"?  (that's the fuzzy/hissy sound, right?)

https://youtu.be/2ngWe6v63l8
Logged
Located in Central North Carolina, USA; credit for picture: livingplanet.ca
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal