Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Loffet 3rd row tuning  (Read 1940 times)

0 Members and 1 Guest are viewing this topic.

Schnorbitz

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 199
Loffet 3rd row tuning
« on: February 26, 2018, 02:50:41 PM »

I find myself sitting between two different tunings for third rows at the moment. One is Heim and the other is Bernard Loffet's system. Both are very useable and share some common (but not all) fingerings. Out of interest, does anyone know what Loffet based his system on? Or is the system something he has designed himself from scratch? 

Thanks
Logged

-Y-

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 896
  • Handry 18 (G/C), Mélodie (D), Club IIb (A/D)
    • a database of nearly 500 melodeons here
Re: Loffet 3rd row tuning
« Reply #1 on: February 27, 2018, 09:49:52 AM »

Actually, there have been several Heim layouts since he first got a 3-rows. One of the most common variants of the Heim layout is exactly the same as the one Bernard is setting as standard on his boxes. The only difference comes from the number of buttons (most of his boxes are 11-10-9 whereas Heim is often presented for 12-11-10) and minor differences in the bass layout (on a G/C, f# and pulled c are reversed).

Do you have two boxes with different layouts or are you wanting to buy one and not knowing what layout to chose ?
« Last Edit: February 27, 2018, 10:16:54 AM by -Y- »
Logged

Schnorbitz

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 199
Re: Loffet 3rd row tuning
« Reply #2 on: February 27, 2018, 11:49:27 AM »

Thanks Y, very interesting.

I have two main boxes.

One is a 3 row D/G Castagnari Rik with Heim on the third row (I managed to identify this as the 'Heim Standard Layout' - I think this is the original Heim but may be mistaken). I also have a Loffet Pro 2 and a half row in G/C with Loffet's tuning on the 1/2 row. 
Both are slightly different and with all third row / acc solutions carry advantages and slight disadvantages (I quite enjoy switching between the two). With an eye to future third row evolution I was interested in seeing where Loffet's tuning came from.

Do you know which variant of Heim Loffet based his third row on?
and
Just out of interest, which Heim version is now the standard on the continent?
Logged

Winston Smith

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4066
  • AKA Edward Jennings
    • "Our Luxor B&B" Luxor life, slice by slice.
Re: Loffet 3rd row tuning
« Reply #3 on: February 27, 2018, 12:18:17 PM »

Would your quest not be simplified by asking the man himself? He's a member on here.
Logged
At last, broken and resigned to accept conformity.
Oh, how I LOVE Big Brother!

-Y-

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 896
  • Handry 18 (G/C), Mélodie (D), Club IIb (A/D)
    • a database of nearly 500 melodeons here
Re: Loffet 3rd row tuning
« Reply #4 on: February 27, 2018, 12:53:13 PM »

I also have a Loffet Pro 2 and a half row in G/C with Loffet's tuning on the 1/2 row. 
Both are slightly different and with all third row / acc solutions carry advantages and slight disadvantages (I quite enjoy switching between the two). With an eye to future third row evolution I was interested in seeing where Loffet's tuning came from.

Do you know which variant of Heim Loffet based his third row on?
and
Just out of interest, which Heim version is now the standard on the continent?

I think 2 and half rows are another matter entirely, because the need for compromise is higher than with a full 3rd row. I don't know if he based his 2+6 on the full 3 row Heim layout, I would tend to say no, because if you look at it, you have the 4 missing notes (d#, a#, f, g#) on two octaves, with the reversal e and d, and the layout is regular, whereas on a  Heim layout, you have the irregularity of the first two rows conserved (the three same notes on the push, the four same notes on the pull). It's a good method when you have limited space, as is the case with 2,5 rows. Bertrand Gaillard has the same approach with his 10-9-4 model, the four buttons give the 4 missing notes on two octaves, the only difference with Bernard's layout being that his has the e/d reversal with the addition button.
So, where on a 2,5 rows you can afford to be opportunistic, on a full three row, you'd be better off with a layout that is consistent throughout its whole tessitura or register.

I think the most popular Heim version is the one Bernard ships his accordions with, see https://diato.org/pdf/DG_3r18b-as.pdf (although the standard layout may have the bass different, see my first post), but the variant with the socalled Dutch reversal (on the whole 2nd row) is gaining in popularity (at least in France). Basically, it allows you to have the four missing notes repeated on the pull, which means you have all the 12 notes on the pull. On the push, you can chose 3 notes out of the 6 that are missing, depending on your needs. If you take a#, c and d#, you have the Heim with reversal. If you take a#, c and c# you're very very near the system of Norbert Pignol and Stéphane Milleret. I've enclosed a layout for you to see what I mean.

Schnorbitz

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 199
Re: Loffet 3rd row tuning
« Reply #5 on: February 27, 2018, 09:54:41 PM »

Quote
I think 2 and half rows are another matter entirely, because the need for compromise is higher than with a full 3rd row. I don't know if he based his 2+6 on the full 3 row Heim layout, I would tend to say no, because if you look at it, you have the 4 missing notes (d#, a#, f, g#) on two octaves, with the reversal e and d, and the layout is regular, whereas on a  Heim layout, you have the irregularity of the first two rows conserved (the three same notes on the push, the four same notes on the pull). It's a good method when you have limited space, as is the case with 2,5 rows. Bertrand Gaillard has the same approach with his 10-9-4 model, the four buttons give the 4 missing notes on two octaves, the only difference with Bernard's layout being that his has the e/d reversal with the addition button.
So, where on a 2,5 rows you can afford to be opportunistic, on a full three row, you'd be better off with a layout that is consistent throughout its whole tessitura or register.

Thanks -Y-, that has explained it brilliantly. I had not factored in the difference between a half and full row. A poor presumption on my behalf.
Logged

Schnorbitz

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 199
Re: Loffet 3rd row tuning
« Reply #6 on: February 27, 2018, 09:56:14 PM »

Quote
Would your quest not be simplified by asking the man himself? He's a member on here.

Ahhhh, that is interesting Edward. Does he comment on Mel Net often?
Logged

Winston Smith

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4066
  • AKA Edward Jennings
    • "Our Luxor B&B" Luxor life, slice by slice.
Re: Loffet 3rd row tuning
« Reply #7 on: February 28, 2018, 05:22:52 AM »

I don't think he does, he's probably too busy building melodeons! However, the fact that he is a member here, and is therefore part of the PM system, indicates (to me, anyway) that he is not averse to being contacted.
Logged
At last, broken and resigned to accept conformity.
Oh, how I LOVE Big Brother!

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: Loffet 3rd row tuning
« Reply #8 on: February 28, 2018, 09:09:29 AM »

I think 2 and half rows are another matter entirely, because the need for compromise is higher than with a full 3rd row.
...Bertrand Gaillard has the same approach with his 10-9-4 model, the four buttons give the 4 missing notes on two octaves, the only difference with Bernard's layout being that his has the e/d reversal with the addition button. ...

The layout of my D/G Castagnari Mory is based on Bernard Loffet's 2.6 row, but modified to get the most out of 5 buttons on the half-row. The E/D 'Dutch reversal' is on the half row, thus maintaining the normal D/E button on the G-row. The remaining half-row buttons give me Eb/F and Bb/G#in two octaves. See attached.

I have to say that it works rather well!
Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk

-Y-

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 896
  • Handry 18 (G/C), Mélodie (D), Club IIb (A/D)
    • a database of nearly 500 melodeons here
Re: Loffet 3rd row tuning
« Reply #9 on: February 28, 2018, 09:41:31 AM »

Steve, isn't yours exactly the same layout Bernard has?

https://diato.org/pdf/DG_2r+5-as.pdf

Mind you, he may have changed his layouts, he's been in the business of making accordion for some time now.  (:)

I have to say that it works rather well!

Not surprising, it may well be the best setting for continental 2,5 rows! Glad it suits you in any case.  :||:
« Last Edit: February 28, 2018, 09:48:24 AM by -Y- »
Logged

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: Loffet 3rd row tuning
« Reply #10 on: February 28, 2018, 10:09:21 AM »

Steve, isn't yours exactly the same layout Bernard has?

https://diato.org/pdf/DG_2r+5-as.pdf

Mind you, he may have changed his layouts, he's been in the business of making accordion for some time now.  (:)
That's interesting. He never used to show a D/G 2.5 layout. His half row is indeed the same as mine. I wonder if he nicked it from me!  ;)
However, he has a slightly different layout on the chin end of the main rows.
Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk

-Y-

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 896
  • Handry 18 (G/C), Mélodie (D), Club IIb (A/D)
    • a database of nearly 500 melodeons here
Re: Loffet 3rd row tuning
« Reply #11 on: February 28, 2018, 10:15:10 AM »

Isn't that because you have a third button start and his a fourth button start?

Prestidigitator

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 448
  • Saltarelle, Hohner, Oakwood Baffetti
Re: Loffet 3rd row tuning
« Reply #12 on: February 28, 2018, 10:19:29 AM »

I don't think he does, he's probably too busy building melodeons! However, the fact that he is a member here, and is therefore part of the PM system, indicates (to me, anyway) that he is not averse to being contacted.

I had a DG 2 1/2 row "Pro" from Bernard a few years back, with some particular requirements of mine on layout, and found it easy enough to deal with him by email, from initial enquiry through to the sending of the instrument to me in the UK. I have a reasonable command of French, as he does of English, and between us we managed to get it all sorted out without any hiccups.
Logged
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal