Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1] 2   Go Down

Author Topic: Another Pokerwork remodel question  (Read 3008 times)

0 Members and 1 Guest are viewing this topic.

Stephen D

  • Member
  • *
  • Offline Offline
  • Posts: 28
Another Pokerwork remodel question
« on: February 27, 2018, 06:04:04 AM »

Hi everyone. There was a cool post a while back where someone made their Pokerwork look really pretty and posh by sanding off the gold/black leafy design and staining the box a nice brown.
They also made their buttons brownish to match the pretty wood stain.

Which leads me to my question:

How should one go about coloring a Pokerwork's buttons? Are they wood or plastic? I am too afraid to examine them closely, lest I break one off. The poster said that their buttons were stained, leading me to believe that they are wood....
However, mine seem like they are plastic! Can I paint them? And, if so, wouldn't one surmise that eventually the button paint would wear off from playing them all the time?

Also, the fancy box has what looks like a nice Hohner decal or something of the sort! Where did that come from?

I have attached the picture (I hope it works). It was on the Pimping the Pokerwork thread, posted by MatlockBather. It looks so nice that I want to do a similar customisation to mine!


One last question. I have read the countless threads about fettling and am preparing to recieve and install the felt/leather from cgm onto the clackety pallets. I am anxious about bending the treble side button levers to return the buttons back to the height of the keyboard after the felt installation! Can someone counsel me on this bending part? I understand that I need to go gently and slowly whilst praying to the melodeon gods to bend/adjust them correctly... Is that it?  :Ph

Thanks everyone!
Logged

Tiposx

  • Durham in England
  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 259
Re: Another Pokerwork remodel question
« Reply #1 on: February 27, 2018, 06:53:19 AM »

As you say - slow and easy. It is not in any way difficult - just lightly bending the linkages, whilst ensuring they stay in the correct plane relative to the pallet slots. I take my time to get all the buttons to exactly the same height using a template. It is a good opportunity to lower the action if desired. I mark out the fondo with light pencil lines for accuracy. I use a fully warmed up hot glue gun on top of the assembled pallets. I do all the pallets at the same time without stopping,  then remove any filaments when they are cold.
Tiposx
Logged

Graham Spencer

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3548
  • MAD as a wet Hohner........
Re: Another Pokerwork remodel question
« Reply #2 on: February 27, 2018, 07:05:27 AM »

.
How should one go about coloring a Pokerwork's buttons? Are they wood or plastic? I am too afraid to examine them closely, lest I break one off. The poster said that their buttons were stained, leading me to believe that they are wood....
However, mine seem like they are plastic! Can I paint them? And, if so, wouldn't one surmise that eventually the button paint would wear off from playing them all the time?

Depends on how old the box is. Over the years they've been made of various synthetic materials (I've never met wooden ones, but that doesn't mean they don't exist), some more porous than others, some more brittle, some whiter-than-white and others more subtle hues. That may not be much help in itself, but if you can date the box to within a few years someone will be able to make an intelligent guess at the likely button material and advise accordingly.

Graham
Logged
Among others, Saltarelle Pastourelle II D/G; Hohner 4-stop 1-rows in C & G; assorted Hohners; 3-voice German (?) G/C of uncertain parentage; lovely little Hlavacek 1-row Heligonka; Bâ™­/Eâ™­ Koch. Newly acquired G/C Hohner Viktoria. Also Fender Jazz bass, Telecaster, Stratocaster, Epiphone Sheraton, Charvel-Jackson 00-style acoustic guitar, Danelectro 12-string and other stuff..........

Squeezing in the Cyprus sunshine

Kimric Smythe

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 712
    • Smythe's Accordion Center
Re: Another Pokerwork remodel question
« Reply #3 on: February 27, 2018, 07:11:15 AM »

I believe the older buttons were made of casein resin. https://youtu.be/BnXGZKCrktE
Logged
Smythe's Accordion Center
Pinole, California
Sales and repairs since 1997

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: Another Pokerwork remodel question
« Reply #4 on: February 27, 2018, 08:05:44 AM »

The main problem with resetting the button height with thicker pallet material is that the bending always seems to alter the position of the buttons in their respective fingerboard holes. So after adjusting the heights it is often necessary to realign the buttons in the holes either by noting what needs doing, removing the keyboard, making an adjustment, refitting the keyboard, rinse and repeat or, if you have a pair of bent nosed pliers which allows you to bend the button end of the mech without removing the keyboard.



Good luck

MatlockBather

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 131
  • B/C and proud
Re: Another Pokerwork remodel question
« Reply #5 on: February 27, 2018, 09:07:32 AM »

Hah, that's my box!!! I'm pleased you like it. People are often slightly disappointed it is only a Pokerwork.
The restoration work was done by Pip Ives at Hobgoblin in Canterbury.
I believe he sanded the wood leaving some of the original black in the grain and then he stained/waxed it to get the fantastic finish. The bellows are original. I think that the buttons were the originals, a plastic of some sort, that he stained with the same stuff that the wood was done with. Only the tops have been done but after lowering the buttons as Lester describes that's all you see. The black button was added 'just because' (its B/C tunes so kinda fits with Double Ray black dot idea) He also sprayed the grill black after cleaning off some corrosion.
I have added a wooden keyboard from Pete at Acorn and done the usual button travel limit mod.
I think the gold stickers came from the local art/graphics shop but CGM do Hohner stickers which might also suit. He outlined them with a marker pen to give them some pop. Finally the original tatty bellows straps were replaced with something nicer, again possible sourced from CGM.
I still love looking at it although it is starting to need a bit of a tune up.
« Last Edit: February 27, 2018, 09:34:59 AM by MatlockBather »
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Another Pokerwork remodel question
« Reply #6 on: February 27, 2018, 09:55:48 AM »

I'm guessing that the buttons shown in the photo are the old style casein which naturally ages to that sort of brownish yellowish shade.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Winston Smith

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4066
  • AKA Edward Jennings
    • "Our Luxor B&B" Luxor life, slice by slice.
Re: Another Pokerwork remodel question
« Reply #7 on: February 27, 2018, 10:20:11 AM »

That is, indeed, a lovely looking box!

I don't like the bellows straps, though, that angled fixing bracket doesn't seem to have a purpose, as far as I can see. Or am I missing something of vital importance?
Logged
At last, broken and resigned to accept conformity.
Oh, how I LOVE Big Brother!

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: Another Pokerwork remodel question
« Reply #8 on: February 27, 2018, 10:24:33 AM »

Or am I missing something of vital importance?

Yes!

They allow the strap to be shorter and to pivot in a place such that, when undone you, can swing them round and clip them onto the fixings on the front top edge of the casework.

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Another Pokerwork remodel question
« Reply #9 on: February 27, 2018, 10:39:14 AM »

But still look far too shiny on a box with antique/distressed finish.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Tone Dumb Greg

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4955
    • Dartmoor Border Morris
Re: Another Pokerwork remodel question
« Reply #10 on: February 27, 2018, 10:59:15 AM »

Or am I missing something of vital importance?

Yes!

They allow the strap to be shorter and to pivot in a place such that, when undone you, can swing them round and clip them onto the fixings on the front top edge of the casework.

Puts me in mind of the first time I lead the music for a dance out.
I didn't turn the bellows straps around when I started playing. Halfway through the first chorus the pokerwork's bottom bellows strap reconnected itself to the pin on the treble side. Stopped me dead. We had to restart the dance. Was I mortified? Answers on a postcard, please.
Logged
Greg Smith
DG/GC Pokerwork, DG 2.4 Saltarelle, pre-war CF Hohner, Hohner 1040 Vienna style, old  BbEb Hohner that needs a lot of work.

ACCORDION, n. An instrument in harmony with the sentiments of an assassin. Ambrose Bierce

Winston Smith

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4066
  • AKA Edward Jennings
    • "Our Luxor B&B" Luxor life, slice by slice.
Re: Another Pokerwork remodel question
« Reply #11 on: February 27, 2018, 11:06:57 AM »

"Yes!

They allow the strap to be shorter and to pivot in a place such that, when undone you, can swing them round and clip them onto the fixings on the front top edge of the casework."


Righty-ho! Thank you Mr Bailey.
Logged
At last, broken and resigned to accept conformity.
Oh, how I LOVE Big Brother!

Anne Croucher

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 203
Re: Another Pokerwork remodel question
« Reply #12 on: February 27, 2018, 02:03:10 PM »

You might like to try using nail varnish on metal things which require either a subtle alteration, and possibly plastics too after testing - the translucent but slightly coloured sort of nail varnish is fine for that, or for more abrupt changes using rather doubtful looking bottles found in charity shops.
It has the advantage of being easily removable or distressed, easily reapplied or layered - though I would not advise its use on varnished woods or anything its solvent might damage.

I used to use translucent nail varnish on costume jewellery to tone it down. 
Logged
Barcarole D/G
Hohner Ericas D/G and C/F
Hohner el Rey del Vallenato A/D/G aka 'Elvis'
Hohner Liliput Bb/Eb club layout
Meinel & Herold G C F 3 voice 3 row 16 bass

Jesse Smith

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 761
  • Buffalo, NY, USA
Re: Another Pokerwork remodel question
« Reply #13 on: February 27, 2018, 02:19:01 PM »

Halfway through the first chorus the pokerwork's bottom bellows strap reconnected itself to the pin on the treble side. Stopped me dead.
This has happened to me far too many times in my short acquaintance with the Pokerwork. (Though it's always the top strap for me.)
Logged
Hohner Pokerwork D/G (x2!), Hohner one row four stops in D and C, Hohner Presswood C/F.

Stephen D

  • Member
  • *
  • Offline Offline
  • Posts: 28
Re: Another Pokerwork remodel question
« Reply #14 on: February 27, 2018, 04:17:08 PM »

Thank you everyone for your advice! I will provide updates on the progress!  :||:
Logged

triskel

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3290
Re: Another Pokerwork remodel question
« Reply #15 on: February 27, 2018, 05:22:44 PM »

You might like to try using nail varnish on metal things which require either a subtle alteration, and possibly plastics too after testing - the translucent but slightly coloured sort of nail varnish is fine for that, or for more abrupt changes using rather doubtful looking bottles found in charity shops.
It has the advantage of being easily removable or distressed, easily reapplied or layered - though I would not advise its use on varnished woods or anything its solvent might damage.

Yes, I'd be very wary of using nail varnish with plastics, and especially near celluloid/nitrocellulose - because the solvent in nail varnish is commonly butyl acetate or ethyl acetate, which softens and ultimately disolves those closely related chemicals. In fact your nail varnish may be basically liquid celluloid! :o

But I think you'd be ok using it on the casein buttons of a pre-war Hohner, because casein is milk-protein based. However, casein readily takes a surface dye anyway, whilst casein buttons on older instruments, attached with steel screws that have gone rusty, can go very brown as a result, and commonly get mistaken for wood.

boxer

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 380
  • B/C Pokerwork - ultimate ceili box
Re: Another Pokerwork remodel question
« Reply #16 on: February 27, 2018, 06:39:09 PM »

MatlockBather - "only a Pokerwork...." ?????  Properly set up, a Pokerwork is as quick and useful a box as any, and far less heavy or expensive than most.  You may gather from this that I'm a Pokerwork fan.
Logged
Nuage, Tommy, Cairdin, 
Double Ray DLX 21x12, Black Dot,
Pre-Erica, Pokerwork
plus various stringed things

MatlockBather

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 131
  • B/C and proud
Re: Another Pokerwork remodel question
« Reply #17 on: February 27, 2018, 07:09:37 PM »

Don't worry brother, I'm with you on that one!
Logged

Rob2Hook

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2278
  • Castagnaris, Hohners & Baffetti
Re: Another Pokerwork remodel question
« Reply #18 on: February 27, 2018, 07:48:05 PM »

Yes, been there - done that.  Top strap reconnected which meant playing the rest of the dance with a peculiar shrugging of the shoulders to pump some air through.

I'd agree that a Pokerwork can be fettled into a decent box, but there are (much) quicker about.  Mind you. every year my brain runs at a lower speed and to paraphrase a well known slogan - a Pokerwork can be as quick as your (aging) fingers.

I knew someone who stripped and painted a Hohner in Wedgwood blue with white decorations.

Rob.
« Last Edit: February 28, 2018, 07:10:09 PM by Rob2Hook »
Logged

Stockaryd

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 255
Re: Another Pokerwork remodel question
« Reply #19 on: February 27, 2018, 10:02:41 PM »

I have darkened  electric cables  in old guitars  with  coffee.

They are still dark. 
Logged
Hohner Corso, Hohner Erica, Emmanuel Pariselle, Gessner,   Koch,   Mariotti,    "China  NoName",   4 Toy,     -and now some more
Pages: [1] 2   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal