Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Button height on one-rows  (Read 1440 times)

0 Members and 1 Guest are viewing this topic.

mselic

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1683
Button height on one-rows
« on: March 04, 2018, 05:08:47 PM »

I'm curious about the button height on one-row models such as the Acadian and the Messervier 'Artisan'. Would someone who has either of these models be able to take a measurement for me? I've noticed that a lot of Cajun boxes have rather tall buttons, which lends itself to a certain style of playing. I would say that it is *slightly* more work with taller buttons, but at the same time it can have a nice feel to the action, such as on my Clement Breton. I've found lowering button height on models such as mine really changes the way the box feels when it's played, and it's not necessary a desirable change, even given that someone like me generally prefers lower button height. Lowering button height also changes the amount the pallets open and, on the Breton, the first row of sound holes is directly next to the where the keyboard attaches, so pallet clearance there is low to begin with. I'm fascinated by the different designs in this regard and the merits and drawbacks to each.
Logged
C#/D player

triskel

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3290
Re: Button height on one-rows
« Reply #1 on: March 05, 2018, 03:04:19 AM »

I'm curious about the button height on one-row models such as the Acadian and the Messervier 'Artisan'. Would someone who has either of these models be able to take a measurement for me? I've noticed that a lot of Cajun boxes have rather tall buttons, which lends itself to a certain style of playing. I would say that it is *slightly* more work with taller buttons, but at the same time it can have a nice feel to the action, such as on my Clement Breton.

Cajun boxes, including my Acadian when I got it, have extremely high buttons. Unfortunately I didn't measure them as they were, but the first thing I did with it (after leaving the shop ;)) was to lower them by carefully bending the levers. They were tripping me up trying to play Irish music on it! :o

A button height of 5mm seems quite sufficient, and that's what they are on my Globe "Gold Medal".

tirpous

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1403
Re: Button height on one-rows
« Reply #2 on: March 05, 2018, 04:15:14 AM »

I happen to have one of each.  Buttons heights on my Acadian was 6-7 mm when I got it (used).  I've lowered it to about 5 mm.  Also replaced the springs which were very stiff.  Actually, I've found information on the net showing the original owner of the box sold it within a couple of months because he had developed right hand problems !  On the Messervier the height is 4.5-5 mm.

On both boxes, the 'back row' holes are roughly 10 mm from the keyboard front.
Logged

mselic

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1683
Re: Button height on one-rows
« Reply #3 on: March 05, 2018, 04:58:47 AM »

I happen to have one of each.  Buttons heights on my Acadian was 6-7 mm when I got it (used).  I've lowered it to about 5 mm.  Also replaced the springs which were very stiff.  Actually, I've found information on the net showing the original owner of the box sold it within a couple of months because he had developed right hand problems !  On the Messervier the height is 4.5-5 mm.

On both boxes, the 'back row' holes are roughly 10 mm from the keyboard front.

Thank you!
Logged
C#/D player
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal