Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: 1 [2]   Go Down

Author Topic: Waxed and nailed  (Read 5387 times)

0 Members and 1 Guest are viewing this topic.

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: Waxed and nailed
« Reply #20 on: March 07, 2018, 07:46:32 PM »

No! Just scrape with a dull blade and then brush over with a soft wire brush.

boxcall

  • You got to love it!!!
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1801
Re: Waxed and nailed
« Reply #21 on: March 07, 2018, 08:25:34 PM »

To clean the reedplates of wax, I sit with the bin on my knee and scrape it off with a well used Stanley knife blade (dragging, not pushing) as I find the single edged razor blades too flexible, and then finish off with the magic nail artist's sponge/abrasive thingy, at about £3 for 10. They come up really nicely without too much effort or expense.
For cleaning rust and years of muck from the wrong side of the reeds, I cut a lolly stick to fit the reedplate gap and glue a bit of very fine abrasive paper onto it, not too awkward and quite gentle too.
I wasn't talking about single edge blades for shaving but exacto single edge blades like these
https://www.bhphotovideo.com/c/product/362348-REG/X_Acto_X670_X670_Single_Edge.html?ap=y&c3api=1876%2C%7Bcreative%7D%2C%7Bkeyword%7D&gclid=Cj0KCQiAuP7UBRDiARIsAFpxiRJjgAVY2tTqVKFFlKQw7cg5qOEAYPDT5LMFsJm2IPwPf3-QDQqYFsMaAuLvEALw_wcB
Which are strong enough IMO and have a rib at the top to hold on to and I was dragging also, holding the blade at 90 degrees to the block or reed doing so the blade does not dig in even if it is sharp.
It's the same thing woodworkers do to finish material after sanding with a sharp scraper held at 90 degrees which takes off any tiny fibers. These things
https://www.google.com/shopping/product/1?lsf=seller:1135568,store:3631685428997087046&prds=pid:1593585149113609880,oid:15191623512552097493&q=wood+scraper+set&hl=en&ei=RkmgWpb_OYvTjwTJm6u4Dg&lsft=gclid:Cj0KCQiAuP7UBRDiARIsAFpxiRKY_UKsUNCcE4lIPJ6otRC9OqQCyDnwFs_9HjQ5S76u16b_WsObQ5YaAgFIEALw_wcB
Quote
...scrape it off with a well used Stanley knife blade (dragging, not pushing)...

This is my tool of choice.  It works well for removing wax from the reed blocks too.  Lately I've been using the 2 halves from a broken blade - I'm sure Edward would approve !  ;)

I did the same for reed blocks and found riding across two of the reed chamber sides or at a 45 degree angle across the top worked best versus trying to do one at a time.
Logged
Hohner 1040 C, Beltuna one row four stop D, O'Byrne Dewitt/ Baldoni bros. D/C#, Paolo soprani "pepperpot" one row D

rees

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 5055
  • Windjammer
    • Wesson Accordions
Re: Waxed and nailed
« Reply #22 on: March 07, 2018, 08:30:56 PM »

I did the same for reed blocks and found riding across two of the reed chamber sides or at a 45 degree angle across the top worked best versus trying to do one at a time.

A good method, especially if the blocks are softwood.

Logged
Rees Wesson (accordion builder and mechanic)
Gungrog, Welshpool, Wales, UK
www.melodeons.com

Stockaryd

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 255
Re: Waxed and nailed
« Reply #23 on: March 07, 2018, 08:34:23 PM »

Better if someone else try first   (:)
Logged
Hohner Corso, Hohner Erica, Emmanuel Pariselle, Gessner,   Koch,   Mariotti,    "China  NoName",   4 Toy,     -and now some more

Winston Smith

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4066
  • AKA Edward Jennings
    • "Our Luxor B&B" Luxor life, slice by slice.
Re: Waxed and nailed
« Reply #24 on: March 07, 2018, 08:44:06 PM »

You must be relatively young, Boxcall. That IS a single edged razor blade for shaving, well, it WAS in the "olden days"! I have a stock of them here in Egypt, which I first brought with me 11 years ago, along with a special holder, and have just spent a few days scraping paint drips off my mosaico stairs with one.
But I still prefer an old Stanley blade for the reedwax.
Logged
At last, broken and resigned to accept conformity.
Oh, how I LOVE Big Brother!

Rog

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2525
  • Repair and tuning in Hants
Re: Waxed and nailed
« Reply #25 on: March 07, 2018, 09:36:12 PM »

I think it was Lester who suggested this to clean reed tongues. I find them pretty good. Sadly Maplins may not be around for much longer.
https://www.maplin.co.uk/p/abrasive-polishing-block-hx04e
I also have made some brass tools for cleaning. Brass is relatively soft but it's hard enough to remove wax and corrosion. And it's easy to work with files etc to get exactly the shape and profile you might need to support a reed when either cleaning or tuning it.
And for some odd reason it is a lovely metal to work .. so I don't need much of an excuse to use it.
« Last Edit: March 07, 2018, 09:38:09 PM by RogerT »
Logged

boxcall

  • You got to love it!!!
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1801
Re: Waxed and nailed
« Reply #26 on: March 07, 2018, 10:11:33 PM »

You must be relatively young, Boxcall. That IS a single edged razor blade for shaving, well, it WAS in the "olden days"! I have a stock of them here in Egypt, which I first brought with me 11 years ago, along with a special holder, and have just spent a few days scraping paint drips off my mosaico stairs with one.
But I still prefer an old Stanley blade for the reedwax.
Similar but I don't think the same, I believe these are slightly thicker than the blades use for shaving, industrial strength.
Used in one of these   https://www.amazon.com/Red-Devil-3223-Scraper-Retractable/dp/B00004YNNA/ref=pd_sim_60_1?_encoding=UTF8&pd_rd_i=B00004YNNA&pd_rd_r=DQ98MGV0G1BTR7R275B5&pd_rd_w=ZI0LZ&pd_rd_wg=YcBuF&psc=1&refRID=DQ98MGV0G1BTR7R275B5
Meant for glass cleaning, etc. I suppose you could shave with it.

I do remember the old razor blades but they were double edge when I was younger and thinner for sure, I 've pulled out walls below many old medicine cabinets and found tons of the used single edge blades. The cabinets had a slot in the bottom where you would dispose of the blade when you were done using it.
Logged
Hohner 1040 C, Beltuna one row four stop D, O'Byrne Dewitt/ Baldoni bros. D/C#, Paolo soprani "pepperpot" one row D

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Waxed and nailed
« Reply #27 on: March 07, 2018, 10:14:22 PM »

Next question:

Wax melts.

Can you  gently heat (in the oven) an empty wooden block and let the wax drain off?

If you try it once you will never try it again.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

malcolmbebb

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2628
  • In dampest Dorset, on the soggy south coast.
Re: Waxed and nailed
« Reply #28 on: March 07, 2018, 10:35:46 PM »

I was also thinking of heat, but in the form of a hot knife.

SJ
Old wax is dry and crumbly enough that it comes off best with a scraping tool. Just make sure you do it over old newspaper or similar, otherwise you'll be finding it for weeks stuck to things you didn't want it stuck to.
Logged
Dino BPII.
"Tradition is not the worship of ashes, but the preservation of fire."

Stockaryd

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 255
Re: Waxed and nailed
« Reply #29 on: March 07, 2018, 11:16:36 PM »

Next question:

Wax melts.

Can you  gently heat (in the oven) an empty wooden block and let the wax drain off?

If you try it once you will never try it again.

I have an old PA  (not mine)   (:)     I can try on,  but if you say so. . . . .
The old rule applies;
You can learn from your mistakes, but it's more fun when others make them.
Logged
Hohner Corso, Hohner Erica, Emmanuel Pariselle, Gessner,   Koch,   Mariotti,    "China  NoName",   4 Toy,     -and now some more

Winston Smith

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4066
  • AKA Edward Jennings
    • "Our Luxor B&B" Luxor life, slice by slice.
Re: Waxed and nailed
« Reply #30 on: March 08, 2018, 06:50:35 AM »

Is that the voice of experience, Theo? Or, more likely, the testament of a reliable witness?

That's almost identical to the "handle" which I have for my blades, Boxcall. But I must admit that I'm not old enough to remember actually using such a blade for shaving, so it's quite likely that your assertion that they are thicker than the shaving type is correct, and that they are a further development of the same thing for more robust duties. Anyway, they're very useful implements, which I'm sure we can agree on!
Logged
At last, broken and resigned to accept conformity.
Oh, how I LOVE Big Brother!

Anahata

  • This mind intentionally left blank
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 6767
  • Oakwood D/G, C/F Club, 1-rows in C,D,G
    • Treewind Music
Re: Waxed and nailed
« Reply #31 on: March 08, 2018, 10:13:52 AM »

I think it was Lester who suggested this to clean reed tongues. I find them pretty good. Sadly Maplins may not be around for much longer.
https://www.maplin.co.uk/p/abrasive-polishing-block-hx04e

RS Components have a variety of them. (and most other useful things that you could have got from Maplin)
Logged
Слава Україні !
Music recording and web hosting: www.treewind.co.uk
Mary Humphreys and Anahata: www.maryanahata.co.uk
Ceilidh band: www.barleycoteband.co.uk

Stiamh

  • Old grey C#/D pest
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3611
    • Packie Manus Byrne
Re: Waxed and nailed
« Reply #32 on: March 08, 2018, 11:55:34 AM »

I do remember the old razor blades but they were double edge when I was younger and thinner for sure, I 've pulled out walls below many old medicine cabinets and found tons of the used single edge blades. The cabinets had a slot in the bottom where you would dispose of the blade when you were done using it.

Well they still do, but nowadays of course the little plastic box with the slot in it is made of plastic - unfortunately. I went back to shaving with a safety razor a decade or two ago for ecological-footprint reasons: the razor itself and the blades are purely of metal - no plastic disposable parts. I suppose the logical extreme would be a cut-throat razor and leather strop, which would obviate the need for the little plastic box, but I can't bring myself to go quite that far.

I also buy little rounds of old-fashioned shaving soap that come in cardboard boxes, so no plastic there. The brush is a bit of a problem, but I'm telling myself, or at least hoping, that Chinese badgers are a renewable resource.

That's also why I like diatonic accordions, especially those with a wood finish. Almost no plastic in them!

Sorry for the digression. Back to the topic...  (:)

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Waxed and nailed
« Reply #33 on: March 08, 2018, 12:04:40 PM »



That's also why I like diatonic accordions, especially those with a wood finish. Almost no plastic in them!


Celluloid isn't really plastic in the modern sense.  The ingredients - camphor and nitrocellulose can be made without use of petroleum.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Rob2Hook

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2278
  • Castagnaris, Hohners & Baffetti
Re: Waxed and nailed
« Reply #34 on: March 08, 2018, 12:30:11 PM »

I think the analogy to a cabinet maker's scraper is a good guide here - especially when scraping the reedblocks.  For no apparent reason I have always substituted other objects rather than buy a scraper. On the scale of reeds and reed blocks I found a six inch steel rule nigh on perfect.  The end does a good job on the reeds and the long edge spans sufficient of the blocks to prevent any tendency to dig in.  I wonder what steel they are made of as I've never yet found any need to square up the edges, whereas the advice for a scraper is to lick the edge into shape before use.

I admit I developed my "skills" using a steel metre rule to smooth and flatten some plaster I'd inexpertly applied across a redundant window aperture.  Actually rather nice to practice on a larger scale!

I have, in the past, used one of those fiberglass pens to remove rust from reed tongues.  However, I used the optional brass inserts once I saw how much pf the glass brush was left behind.  It doesn't really work on the inside face though.  I did my best sliding some flour paper (?) under the reed.

None of the above is really a recommendation, apart from the six-inch rule.

Rob.
Logged

John MacKenzie (Cugiok)

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2360
  • Fettling... Learning to reed and right.
Re: Waxed and nailed
« Reply #35 on: March 15, 2018, 04:38:37 PM »

I discovered these "spudgers" are good for removing old wax

https://www.ebay.co.uk/itm/NEW-Metal-Spudger-Pry-Opening-Tool-for-iPad-iPhone-iPod-Touch-Repair-1-2-3-4/251339402073?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2057872.m2749.l2649

+ You can buy plastic "spudgers" which are kinder on the woodwork.


Sir John
Logged
There is no beginning to my talent :)



: Hohner Club Modell 1. Bb/Eb, de-clubbed : Early Hohner Pressed Wood A/D : 1930's Varnished wood G/C:  Hohner Erika C/F: Bandoneon tuned D/G Pressed wood: Koch F/Bb; G/C Pre Corso
Pages: 1 [2]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal