Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Cool video of a fella making bellows from start to finish - pretty cool!  (Read 3053 times)

0 Members and 1 Guest are viewing this topic.

Stephen D

  • Member
  • *
  • Offline Offline
  • Posts: 28

Maybe you all have seen it already...

Accordion bellows making with primitive handmade tools

It's Russian

https://www.youtube.com/watch?v=6nmUhz7ciwk
Logged

Rog

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2525
  • Repair and tuning in Hants

Wow. I love this video.

Jozz

  • Good talker
  • **
  • Offline Offline
  • Posts: 97
  • Greetings from the Netherlands!
    • Stichting Bon Artz

Had seen it but really nice right

Lovely to see how easy he makes those metal corners
Logged
Stichting Bon Artz - We present and support authentic music and small-scale performance arts.

Andrius

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 180

more than 20 years ago I have seen accordion master from Latvia making metal corners for bellows. He had blanks like attached picture (sorry, bad painter) and special form like in this video. Only one difference - he produced corners with one stroke of sledgehammer instead pressing.
Logged
Koch Bb/Eb 12b 3v : Koch A/D 8b 2v : Koch C/F 12b 2v : Hohner Erica C/F 8b 2v : Hohner Erika C/F 2.4 row 8b 2v : Hohner early pre-Corona F/Bb/Eb 12b 2v: Hohner Liliput 2.4 row Bb/Eb 8b 2v : Hohner Club III BS C/F 2.7 row 8b 3v : Galotta D/G 8b 2v : Meinel & Herold G/C/F 16b 2v : Unkn G/C 8b 2v : Petersburg accordion F/Bb/Eb 16b 3v: Petersburg accordion G/C/F 16b 2v : Bandoneon Alfred Arnold 128 tone 2v : Bandoneon Wilhelm König 144 tone 2 v

Winston Smith

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4066
  • AKA Edward Jennings
    • "Our Luxor B&B" Luxor life, slice by slice.

That's a great video, Stephen. How about you translate the audio?
Logged
At last, broken and resigned to accept conformity.
Oh, how I LOVE Big Brother!

Stephen D

  • Member
  • *
  • Offline Offline
  • Posts: 28

Hahaha I have no idea about Russian
Logged

Rog

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2525
  • Repair and tuning in Hants

I'll just dust off my copy of 'A Clockwork Orange'.

Winston Smith

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4066
  • AKA Edward Jennings
    • "Our Luxor B&B" Luxor life, slice by slice.

I love it that there are still people who just won't be denied what they want because of their circumstances. Using one's own ingenuity and things which are to hand, brings a great reward when the goal is accomplished.
Mind you, it's as well that the bloke in Andrius' video isn't somewhere like England, he'd certainly be locked up and his kids taken into care for using such a dangerous grinding wheel!
Logged
At last, broken and resigned to accept conformity.
Oh, how I LOVE Big Brother!

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping

it's as well that the bloke in Andrius' video isn't somewhere like England, he'd certainly be locked up and his kids taken into care for using such a dangerous grinding wheel!
My grandfather, who was a model engineer and made 4-inch gauge live steam locomotives in his workshop at the bottom of his garden, taught me how to use a lathe, milling machine and brazing hearth when I was 5 - 6 years old.
Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk

Winston Smith

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4066
  • AKA Edward Jennings
    • "Our Luxor B&B" Luxor life, slice by slice.

Aye, you were lucky!!!!!!!!!!!!!!!
Logged
At last, broken and resigned to accept conformity.
Oh, how I LOVE Big Brother!

NickF

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 177

That is quite seriously impressive - the amount of work and skill is astonishing, and not something I had considered before!
Logged
Serenellini 233, Streb, D/G Pokerwork, D/G Liliput, Bb/Eb Liliput, Bb/Eb Comedy Wardrobe (Hohner Model X), Bb/Eb Accidental Erika

If you can smile when things are going wrong, you must have someone else in mind to blame

diatonix

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 622

Being a professional bellows maker myself, I'm most impressed! It's a pity though, that he doesn't show in detail how he attaches and presses the metal corners. This is the trickiest part of the whole process...
« Last Edit: March 24, 2018, 08:48:35 PM by diatonix »
Logged

boxcall

  • You got to love it!!!
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1801

Being a professional bellows maker myself, I'm most impressed! It's a pity though, that he doesn't show in detail how he attaches and presses the metal corners. This is the trickiest part of the whole process...
Pretty cool alright!!
I was wondering if most bellow makers make that little notch in the cardboard corners so as to recess the metal corner piece?
Logged
Hohner 1040 C, Beltuna one row four stop D, O'Byrne Dewitt/ Baldoni bros. D/C#, Paolo soprani "pepperpot" one row D

Winston Smith

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4066
  • AKA Edward Jennings
    • "Our Luxor B&B" Luxor life, slice by slice.

Well, there's an opening for you, diatonix. I was impressed by the fellah's home-made corner bending equipment, but I too would like to see how those corners are supposed to be fastened in place.
Not many of us would be brave enough to have a go at making our own bellows, but I'm sure there must be one or two in the position where they cannot stretch to new ones, (no pun intended) but desperately need some sort of replacements.
Logged
At last, broken and resigned to accept conformity.
Oh, how I LOVE Big Brother!

diatonix

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 622


I was wondering if most bellow makers make that little notch in the cardboard corners so as to recess the metal corner piece?

Personally, I don't. While it may look nice, it weakens the cardboard corners and shortens the bellows' life span considerably.
Logged

tirpous

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1403

Quote
I was wondering if most bellow makers make that little notch in the cardboard corners so as to recess the metal corner piece?

If anyone does that, I would think it's a small minority.  However, having now seen this video, I realize some bellows I had until now assumed to be without corners are maybe using hidden corners (see picture for an example).

I was intrigued by his corner-bending contraption, more specifically what allows the sides of the 'U' channel to wrinkle around the bend in a controlled manner.
Logged

boxcall

  • You got to love it!!!
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1801


I was wondering if most bellow makers make that little notch in the cardboard corners so as to recess the metal corner piece?

Personally, I don't. While it may look nice, it weakens the cardboard corners and shortens the bellows' life span considerably.
Interesting thanks!  I saw a video somewhere on YouTube where that wasn't done so I was wondering.
Could have been one you posted I can't remember, I think in that video a web clamp ran around the outside of blocks of wood that wrap around the bellows then pressure was applied down on to metal corners with a press. I see he had blocks of wood that wrapped the bellows so he probably did something similar. Just a guess?
I was looking at the metal corners of my boxes and they all seem to be slightly proud of the cardboard.

Quote
I was wondering if most bellow makers make that little notch in the cardboard corners so as to recess the metal corner piece?

I was intrigued by his corner-bending contraption, more specifically what allows the sides of the 'U' channel to wrinkle around the bend in a controlled manner.
That was pretty clever, it would take a bit of time to fill that little bucket with pre bent corners.
I was thinking that cutting the metal into strips with tin snips would need some cleaning up of the edges but maybe not?
Logged
Hohner 1040 C, Beltuna one row four stop D, O'Byrne Dewitt/ Baldoni bros. D/C#, Paolo soprani "pepperpot" one row D

blafleur

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 530

A very difficult item to build, and he does it from scratch with all with home grown ingenuity, true craftsman.  It's videos like this that make me realize what a crude workman I am.  I tried a bellows one time with prefolded cardboard, premade corners, and precut diamonds, and I burned it in the shop stove.

triskel

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3290

Well, there's an opening for you, diatonix. I was impressed by the fellah's home-made corner bending equipment, but I too would like to see how those corners are supposed to be fastened in place.

Here's how diatonix fits his corners Edward: Accordion bellows construction: pressing corners

Winston Smith

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4066
  • AKA Edward Jennings
    • "Our Luxor B&B" Luxor life, slice by slice.

"and I burned it in the shop stove."

I think that's the fear of people like me. We cannot afford new, and are frightened of wasting our stash by making mistakes! I find these sort of videos really encouraging.

MrTriskel, thanks for posting that link.
Logged
At last, broken and resigned to accept conformity.
Oh, how I LOVE Big Brother!
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal