Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Binci reeds in Hohner HA114?  (Read 2874 times)

0 Members and 1 Guest are viewing this topic.

mselic

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1683
Binci reeds in Hohner HA114?
« on: March 22, 2018, 06:15:57 PM »

I’m sure I’ll be inviting criticism with this query, but I’m curious if anyone has put Binci reeds (or any other non-Hohner make) in a Hohner HA114? I really like the old 4-stops, find them to be the perfectly sized, and often enjoy playing them even more than a higher-end box. I usually tweak them a little by lowering the treble button spring tension, resurfacing pallets, etc. I’ve often wondered why more people haven’t copied the design (I know Reed Wesson has done this with the Windjammer). In particular I like the single-end frames with pins - much more compact! With better reeds in one, I wonder how it may play! I realize that it wouldn’t sound like a high end, handmade  one-row, but I can imagine that it might be something fun in its own right.

The closest that I’ve found of what I’m describing is someone putting Binci reeds in a 2-stop:

https://youtu.be/T5DJrWmScOI

I’m asking because I’m considering doing this!
Logged
C#/D player

Winston Smith

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4066
  • AKA Edward Jennings
    • "Our Luxor B&B" Luxor life, slice by slice.
Re: Binci reeds in Hohner HA114?
« Reply #1 on: March 22, 2018, 07:06:30 PM »

If you do it, I might just be able to find a use for your rubbishy old Hohner reeds. I could send my address via a PM?
Logged
At last, broken and resigned to accept conformity.
Oh, how I LOVE Big Brother!

mselic

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1683
Re: Binci reeds in Hohner HA114?
« Reply #2 on: March 22, 2018, 07:10:42 PM »

If you do it, I might just be able to find a use for your rubbishy old Hohner reeds. I could send my address via a PM?

I’m not quite there yet, and I actually like “rubbishy old Hohner reeds” and always have a use for them ;)
Logged
C#/D player

Winston Smith

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4066
  • AKA Edward Jennings
    • "Our Luxor B&B" Luxor life, slice by slice.
Re: Binci reeds in Hohner HA114?
« Reply #3 on: March 22, 2018, 07:12:47 PM »

Shy bairns get nowt! (But you can't blame me for trying!)
Logged
At last, broken and resigned to accept conformity.
Oh, how I LOVE Big Brother!

boxcall

  • You got to love it!!!
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1801
Re: Binci reeds in Hohner HA114?
« Reply #4 on: March 22, 2018, 08:26:33 PM »

What do you think of the sound in that 2 voice you posted?
I don't own a hohner 4 stop but a two voice 1040 with (rubbishy (:)) hohner reeds that sound sweet and pretty loud when you use a little more bellow pressure.
The box with new reeds sound louder to me but maybe not better, hard to tell, plus what's the tuning that was used? Sounds dryish. Could be what your shooting for but I like something in between or wetter.
Logged
Hohner 1040 C, Beltuna one row four stop D, O'Byrne Dewitt/ Baldoni bros. D/C#, Paolo soprani "pepperpot" one row D

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: Binci reeds in Hohner HA114?
« Reply #5 on: March 22, 2018, 08:50:36 PM »

Binci reed plates are bigger than Hohner ones so fitting them would need, probably, new reed blocks.

Rog

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2525
  • Repair and tuning in Hants
Re: Binci reeds in Hohner HA114?
« Reply #6 on: March 23, 2018, 08:04:21 AM »

...adding to Lester's comment. I fitted some TAM reeds to a Hohner and the plates tend to be considerably thicker.  So where you have limited clearance on reed sets facing each other, as you do on a HA114, you may run into issues, esp as the blocks are glued in.

triskel

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3290
Re: Binci reeds in Hohner HA114?
« Reply #7 on: March 23, 2018, 12:40:09 PM »

...adding to Lester's comment. I fitted some TAM reeds to a Hohner and the plates tend to be considerably thicker.  So where you have limited clearance on reed sets facing each other, as you do on a HA114, you may run into issues, esp as the blocks are glued in.

Also, tipo a mano and a mano reeds have longer tongues, which therefore need more space to swing in. I remember getting a Serenellini made with such reeds, and the lowest/longest ones would hit off the internal bellows folds when the bellows were nearly closed...  :(

Lars

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 797
Re: Binci reeds in Hohner HA114?
« Reply #8 on: March 24, 2018, 10:25:36 PM »

I have done two reed conversion HA-114's.

One from G to D, and one from A to Eb (D#), both using Harmonikas A-mano reeds. Since the pitch I was aiming for was considerably higher than the original pitches, I was able to put the new reeds in place with very minimal work to the blocks - only a small sliver off of a few chambers.

So what about the tone?
They both sound nice, but very different than other 4-stoppers. They lost the 'brawl' or 'razz' that the original Hohner reeds gives a HA-114, having a more rounded tone with the new reeds. They don't have the punchy tone that I most often hear in modern cajun/quebec boxes, but a voice of their own.

And volume?
They pack a punch, but I was surprised to find how quiet they both turned out. In my opinion, the original Hohner reeds are just as loud.

I also padded the pallets thicker, replaced the buttons, made a wider growlbox with internal flappers (for comfort), and a new all-wood keyboard housing - as well as making everything black. I agree that these are a perfect size, and I love being able to bring a low-cost but well-playing melodeon when I want to mix the sounds from the 2-row I usual bring out to gigs and sessions.

I have another HA-114 shell and a full set of new DIX-reeds, and I'm contemplating whether it could be a fun mix. The box in question is in need of such extensive work anyway, that a reed-swap would not be butchery to any originality.
Logged

mselic

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1683
Re: Binci reeds in Hohner HA114?
« Reply #9 on: March 24, 2018, 11:49:05 PM »

Wow, Lars - thanks for that info! Any photos/sound samples of these?
Logged
C#/D player

Lars

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 797
Re: Binci reeds in Hohner HA114?
« Reply #10 on: March 25, 2018, 07:47:37 PM »

Quick mobile phone video: https://youtu.be/O16OYWZCFU4
Logged

rees

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 5055
  • Windjammer
    • Wesson Accordions
Re: Binci reeds in Hohner HA114?
« Reply #11 on: March 25, 2018, 09:07:58 PM »

Logged
Rees Wesson (accordion builder and mechanic)
Gungrog, Welshpool, Wales, UK
www.melodeons.com
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal