Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: One piece reed plates  (Read 1327 times)

0 Members and 1 Guest are viewing this topic.

DaveW

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 153
One piece reed plates
« on: March 24, 2018, 12:05:40 PM »

I need to revalve a single row 'Bos Patent Melodeon'. Current, curved, valves are leather - another thread suggest CGM as a source of new composite reeds, which is fine  (I was a Plastics technologist a while back).
Now comes the crunch - just like a harmonica this two voice machine has each set of reeds mounted (individually riveted) on what looks like a single sheet of Zinc. This is nailed and waxed in. So treble side, two voices, two large reed blocks. Please can I have suggestions, how to remove these blocks, short of blowlamp treatment. Replies beginning with the words 'I did it like this..' would be much appreciated. I can see the topside valves, but those underneath remain hidden.
« Last Edit: March 24, 2018, 12:08:37 PM by DaveW »
Logged
DaveW

Paolo Soprani b/c/c#, V Soprani b/c, Hohner Compadre adg, Roland FR-18, Hohner Merlin d/g

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: One piece reed plates
« Reply #1 on: March 24, 2018, 12:21:20 PM »

Just pull out all the pins and the reed plate will lift out.  Often the pins are shape like in inverted L so you don’t even need to pull them out, just twist them round by 180 degrees.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

DaveW

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 153
Re: One piece reed plates
« Reply #2 on: March 24, 2018, 12:25:42 PM »

Just pull out all the pins and the reed plate will lift out.  Often the pins are shape like in inverted L so you don’t even need to pull them out, just twist them round by 180 degrees.
Thanks Theo. That sounds like good sense. Rewaxing - I've never tried it - could be done bit by bit I guess?
Logged
DaveW

Paolo Soprani b/c/c#, V Soprani b/c, Hohner Compadre adg, Roland FR-18, Hohner Merlin d/g

John MacKenzie (Cugiok)

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2360
  • Fettling... Learning to reed and right.
Re: One piece reed plates
« Reply #3 on: March 24, 2018, 12:44:37 PM »

Rewaxing is fun (allegedly) I am learning to do it now. A working rewax, is quite easy, a work of art rewax, takes practice. ;)

SJ
Logged
There is no beginning to my talent :)



: Hohner Club Modell 1. Bb/Eb, de-clubbed : Early Hohner Pressed Wood A/D : 1930's Varnished wood G/C:  Hohner Erika C/F: Bandoneon tuned D/G Pressed wood: Koch F/Bb; G/C Pre Corso

malcolmbebb

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2628
  • In dampest Dorset, on the soggy south coast.
Re: One piece reed plates
« Reply #4 on: March 24, 2018, 01:51:19 PM »

It may not have been waxed in the first place. The bent nails would have held it on to a cord gasket. You'll probably need to pull out the nails and scrape the wax.
On relplacement you will need to make a thin gasket to replace the cord (candle wick) unless something suitable is already there in good shape
Logged
Dino BPII.
"Tradition is not the worship of ashes, but the preservation of fire."

Winston Smith

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4066
  • AKA Edward Jennings
    • "Our Luxor B&B" Luxor life, slice by slice.
Re: One piece reed plates
« Reply #5 on: March 24, 2018, 04:35:36 PM »

I've had a couple with these long plate reeds and the securing "nails" have actually been screws, so that a turn to the left not only takes them out of the way, but lifts them from the reedplate, ingenious!
Although I've only had about four to bits, I haven't come across any signs of a gasket material. Some were sealed with wax, and at least one was just face to face with the blocks, an easy clean-up job! Perhaps it had been interfered with before?
Logged
At last, broken and resigned to accept conformity.
Oh, how I LOVE Big Brother!

DaveW

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 153
Re: One piece reed plates
« Reply #6 on: March 24, 2018, 06:39:16 PM »

Thanks for these replies. The bellows gasket was string - now 10 x 3mm CGM self adhesive neoprene strip. The reed plates seem to be waxed all round. I will find out when turn the Nails! 
Logged
DaveW

Paolo Soprani b/c/c#, V Soprani b/c, Hohner Compadre adg, Roland FR-18, Hohner Merlin d/g
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal