Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: 1 [2]   Go Down

Author Topic: Removing Celluloid?  (Read 5608 times)

0 Members and 1 Guest are viewing this topic.

Winston Smith

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4066
  • AKA Edward Jennings
    • "Our Luxor B&B" Luxor life, slice by slice.
Re: Removing Celluloid?
« Reply #20 on: May 02, 2018, 08:53:38 PM »

"Unusual though."

Could yet be my eyesight, of course, lol. Time will tell.

Mario, I should think you're right there, but it will be getting neoprene gasket.
Logged
At last, broken and resigned to accept conformity.
Oh, how I LOVE Big Brother!

Henry Piper

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 368
Re: Removing Celluloid?
« Reply #21 on: May 03, 2018, 10:02:53 AM »

I'm after removing the celluloid for merely esthetics. I got some pointers from Lester before starting the job.

I have a set of craft precision knives. I have a flat scalpel (looks kind of like a chisel in shape) that I found great. The blade was thin enough the contour to the curves of an Erica. Removing the celluloid is easy - start on a corner under the grill and start chipping away. The difficult part is really removing the bass mechanism as, you are probably already aware, on many Hohners you have to take it apart to get the buttons out. Once the celluloid is removed, I used a very fine grit (280+) sandpaper to remove any glue. Then stain and finish with two coats of polyurethane. I would recommend waxing them as well, before putting it all back together. I used a extra fine grit sandpaper (600) on the box after the polyurethane had dried and applied some finishing wax with 0000 grade steel wool. Here's a good article on finishing wax:

http://www.woodworkersjournal.com/rubbing-great-finish-satin-gloss/

If you disconnect the pallet levers, you can withdraw them through the button holes,....this means you don't have to remove the actual mechanism, but do mark the position of each lever as they are all slightly different, you can use model railway Track Pins to re fix them.
Logged
From Ottery St Mary Devon. Currently Playing Dino Baffetti BP2 in D/G, Hohner Student 1 P.A conversion  in D/G,  Hohner 3515 Pre-Pokerwork in A/D,   2 row "Beaver Brand" in Bb/Eb, Hohner Pre- Erica in G/C .  Single row permanent 4 voice, 4 bass in C from old Hohner single row and bits of a cheap Cajun box !!,

Andy Next Tune

  • aka Andy Wooles
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1127
  • Melodeon with Accidentals? Make a PI Claim!!!
    • www.shavethedonkey.co.uk
Re: Removing Celluloid?
« Reply #22 on: May 03, 2018, 04:52:40 PM »

The celluloid didn't wrap over to touch the bellows frames on the  70's Erica I stripped, but finished flush with the casing edge.
However there was celluloid under the keyboard which meant a 'shim' was needed on each side to keep the keyboard aligned correctly with the mechanism.

When removing the pallet levers, as well as noting which hole they came from also note exactly which lever on the mechanism they are connected to. It is very easy to reconnect them the wrong way round, which makes for an unusual bass layout!!
Logged
Andy, from the now ex-County Palatine of Cheshire

Caring for a European community of melodeons from France, Italy, Germany, Wales and Suffolk!

Henry Piper

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 368
Re: Removing Celluloid?
« Reply #23 on: May 03, 2018, 07:23:29 PM »

Like Andy's The only Erica I have stripped had no celluloid on the casing edges, so in this case there was no need for thicker Gasket.
Logged
From Ottery St Mary Devon. Currently Playing Dino Baffetti BP2 in D/G, Hohner Student 1 P.A conversion  in D/G,  Hohner 3515 Pre-Pokerwork in A/D,   2 row "Beaver Brand" in Bb/Eb, Hohner Pre- Erica in G/C .  Single row permanent 4 voice, 4 bass in C from old Hohner single row and bits of a cheap Cajun box !!,
Pages: 1 [2]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal