Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Liliput Strap brackets  (Read 1366 times)

0 Members and 1 Guest are viewing this topic.

John MacKenzie (Cugiok)

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2360
  • Fettling... Learning to reed and right.
Liliput Strap brackets
« on: May 10, 2018, 05:14:45 PM »

Need to replace brackets on my Liliput, and was wondering if anybody else had done this, and what they used. The existing brackets are so small, that I can't see being able to match up the screw holes with a modern set. Does anybody make ones small enough?

Sir John  (aka SJ)  >:E
Logged
There is no beginning to my talent :)



: Hohner Club Modell 1. Bb/Eb, de-clubbed : Early Hohner Pressed Wood A/D : 1930's Varnished wood G/C:  Hohner Erika C/F: Bandoneon tuned D/G Pressed wood: Koch F/Bb; G/C Pre Corso

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: Liliput Strap brackets
« Reply #1 on: May 10, 2018, 05:23:15 PM »

I use these

http://www.cgmmusical.co.uk/CGM_Musical_Services/Strap_Brackets.html#8

Fill the old holes, cocktail stick and superglue and make new ones to suit.

MarioP

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 217
  • Enjoying the MADNESS
    • AnyITsolution.Services
Re: Liliput Strap brackets
« Reply #2 on: May 10, 2018, 05:26:22 PM »

I've seen advised on replacing brackets and almost everyone just covers the old holes and open new holes.
Specially this mini accordions you can't find bigger brackets fitting the same exxact holes anyways.

I just keep the originals and original straps to ensure i don't have to go that route of changing brackets to use new belts.
Logged
Hohner Corso A/D x2, G/C, Corona II A/D/G from the 60s.
Hohner Pre Corona II BsEsAs,Club IV C/F Pre-War, Liliput C/F, Mignon I (G) Piano from the 30s, Kromatica III from the 60s harmonica. Hohner Kids I. Pearl Forum series 80s, Zildjian, Sabían, Wuhan cymbals. Ludwig snare 70s.

John MacKenzie (Cugiok)

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2360
  • Fettling... Learning to reed and right.
Re: Liliput Strap brackets
« Reply #3 on: May 10, 2018, 05:39:16 PM »

Existing ones look like these, but I was wondering what size they are.

Sir John

http://www.cgmmusical.co.uk/CGM_Musical_Services/Strap_Brackets.html#9
Logged
There is no beginning to my talent :)



: Hohner Club Modell 1. Bb/Eb, de-clubbed : Early Hohner Pressed Wood A/D : 1930's Varnished wood G/C:  Hohner Erika C/F: Bandoneon tuned D/G Pressed wood: Koch F/Bb; G/C Pre Corso

Helena Handcart

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2452
  • Saltarelle Nell
Re: Liliput Strap brackets
« Reply #4 on: May 10, 2018, 06:06:28 PM »

I use these

http://www.cgmmusical.co.uk/CGM_Musical_Services/Strap_Brackets.html#8

Fill the old holes, cocktail stick and superglue and make new ones to suit.

Lester did a lovely job on one of our stable of Liliputs which arrived with a broken bracket.  It was either Scarlet or the Purple Witch (PW is no longer with us).  These brackets are spot on.
Logged
Saltarelle Le Romané  | Saltarelle Nuage | Oakwood | various elderly Hohners

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Liliput Strap brackets
« Reply #5 on: May 10, 2018, 06:09:40 PM »

If you have the original brackets then use them and thread a key ring through the tater small hole.  That will give plenty of space for modern straps.

If anyone is discarding old  Liliput strap brackets, please discard them in my direction!
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

John MacKenzie (Cugiok)

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2360
  • Fettling... Learning to reed and right.
Re: Liliput Strap brackets
« Reply #6 on: May 10, 2018, 06:28:17 PM »

Well the bracket itself is waggling loose in the base plate.  I have tried several ways to try and fix it, but bronze wire solder won't take, silver solder won't take, all it has done is discoloured the metal. Trouble is, it's a plated brass base, with a steel wire rail.

Sir John
Logged
There is no beginning to my talent :)



: Hohner Club Modell 1. Bb/Eb, de-clubbed : Early Hohner Pressed Wood A/D : 1930's Varnished wood G/C:  Hohner Erika C/F: Bandoneon tuned D/G Pressed wood: Koch F/Bb; G/C Pre Corso

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: Liliput Strap brackets
« Reply #7 on: May 10, 2018, 06:32:33 PM »

Well the bracket itself is waggling loose in the base plate.  I have tried several ways to try and fix it, but bronze wire solder won't take, silver solder won't take, all it has done is discoloured the metal. Trouble is, it's a plated brass base, with a steel wire rail.

Sir John

I believe the turret piece is meant to rotate on the base plate, at least it has done on most the ones I have met. The problem usually is that the turret pulls out of the base plate and I have yet to find a successful long term method of remaking the rotating joint.

John MacKenzie (Cugiok)

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2360
  • Fettling... Learning to reed and right.
Re: Liliput Strap brackets
« Reply #8 on: May 10, 2018, 06:43:53 PM »

Pic's on the Melnet FB page
Logged
There is no beginning to my talent :)



: Hohner Club Modell 1. Bb/Eb, de-clubbed : Early Hohner Pressed Wood A/D : 1930's Varnished wood G/C:  Hohner Erika C/F: Bandoneon tuned D/G Pressed wood: Koch F/Bb; G/C Pre Corso
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal