Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: 1 2 3 [4] 5   Go Down

Author Topic: 3 fingers or 4?  (Read 30785 times)

0 Members and 1 Guest are viewing this topic.

Pushpull

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 185
Re: 3 fingers or 4?
« Reply #60 on: August 26, 2009, 03:27:17 PM »

Quote
Many other instruments besides melodeon have alternative ways of playing the same note

Yes, (although as Falseknight has pointed out it is usually not as complicated for them, because the position changes are less frequent)
In folk music maybe
Quote
but they have often developed score notations to advise on which position to use at which point. 
In years gone by, I played viola. I don't remember ever buying music which had the fingering already noted (apart from elementary tutor books and some studies). It's something you decide on by playing the piece. I'm in a similar situation now with my main instrument - oboe. There are many alternative ways of playing some notes depending on the note you are coming from or going to and perhaps the tone colour you are after or a slight change in intonation you might want depending on the key being played. I'm at the stage where I can apply some of the required fingerings on auto pilot whilst sight reading but in many cases I need to play through a passage and pencil in the fingerings.

Better players that me can sight read much harder stuff and get the correct fingering immediately (even swapping mid note if they get caught out). I don't think the melodeon is much different. I can play simple stuff sight reading and get reasonable chords but generally need a couple of goes to decide whether I'm going to push or pull - and that applies to reading from the dots or working out a tune by ear.
Logged

Howard Jones

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1203
Re: 3 fingers or 4?
« Reply #61 on: August 26, 2009, 03:53:44 PM »

Taking the discussion back a few steps - sorry to be a little anal about this -

Quote from: me
Playing on the D row, in your first phrase (BGBd c#Ac#e) I'd be using the same fingers as yourself as far as the d, but I would shuffle to the 2nd finger for the c# and I'd shuffle again on the same button to play the ensuing d with my first finger, setting me up nicely for the phrase dfaf. What would you use to play the d that follows your final 4th-finger e ?
I use the middle finger for the D. That's a slight shift of the hand along the keyboard, and sets me up to play the following phrase with my middle and little fingers.

I couldn't figure this out until it dawned on me that we must be playing different settings. Is your next note (after c#Ac#e) an f# ? So you're shuffling from 4th to 3rd between e and f# ?

I'm not sure if I'm playing any particular setting, this is a tune I've learned by ear from many different players.  I probably don't play it the same way each time, anyway.

Here's the ABC for the A part as I've described it above (I think!):

X:1
T:Morpeth Rant
M:4/4
L:1/8
K:D
(3ABc|:"D"d2AG FDFA|"G"BGBd "A"cAce|1"D"d2 ef "G" gfed|"A"c2 e2 e2 (3ABc:|2"D"d2 ef "Em" gfec|"A"A2 "D"d2 d4|


The first time through, in the third bar I'd use the middle finger on the push G (G row) against the G chord, on the repeat I'd use the little finger for the pull G on the D row (against the pulled Em chord).  But if we ever find ourselves in the same session, I can't guarantee I'll play it like this!

Quote
Returning to the subject of notation raised by Chris, doesn't the tablature widely used in France address all these questions? Except of course, note duration, meaning that you have to have the conventional notation on top of the tab.
Another way is to show just the note stems, without the staff or the dots, to show duration.

Quote
Personally I would see tablature as a very restrictive system - useful for learning exactly what someone else does...
Or for recording what fingering you've worked out, so that when you come back to the tune later (possibly after having not played it for some time) you can see what you did.

Quote
However for general purposes I think that time put into mastering alternative notation systems like this would be better spent mastering one's own keyboard, learning by ear, and conventional notation. A lot more work at the beginning maybe, but work that would pay big dividends later on.
Conventional notation still won't help you with fingering question.  I think playing by ear helps, but ultimately it's down to familiarity with the keyboard, so that these choices become instinctive.  That only comes from experience and practice.
« Last Edit: August 26, 2009, 03:57:24 PM by Howard Jones »
Logged

Falseknight

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 449
    • False Knight
Re: 3 fingers or 4?
« Reply #62 on: August 26, 2009, 04:02:41 PM »

On other instruments, the aim is to make the flow of a sequence of notes as efficient as possible.

Many melodeon players use bellows reversals to add "bounce" to the music, which can mitigate against the most efficient fingering patterns.
Logged

Chris Brimley

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2038
Re: 3 fingers or 4?
« Reply #63 on: August 26, 2009, 05:08:45 PM »

Quote
Returning to the subject of notation raised by Chris, doesn't the tablature widely used in France address all these questions? Except of course, note duration, meaning that you have to have the conventional notation on top of the tab. Personally I would see tablature as a very restrictive system - useful for learning exactly what someone else does, but otherwise stifling, and presumably slow into the bargain.

I have to confess I'm not very familiar with French tablature (except for finger-picking guitar, where Marcel Dadi used it remarkably effectively.)

Damien Connolly's system is not entirely clear from the link, but I think his idea of colour-coding rows has some merit.  I know it's not always the case (and I'm sure someone is going to point out some obvious examples!), but of the many hundreds of different button layouts available for boxes, it seems to be generally the case that for each row, repeated notes are relatively rare.  This means that a system that told you which row to play would actually be a pretty efficient and useful way of communicating a unique fingering method - the bellows direction would follow automatically.  This would link with the 'cross-row' concept, which I had previously thought wasn't general enough to have much application.

Now of course the snag is that since there are so many different button layouts, there would be no point in writing down one set of annotations for a given tune - they would differ depending on what box you had.  But looking at this thing as a system, it does also mean some computer whizzo could develop an algorithm that might predict the likely easiest fingerings for a given tune (or midi file?), on a given box, using the info available on box layouts on melodeons.net!  You could feed in the characteristics of a human hand, and the software could work out various useful fingerings for you to try out on each tune!  Does any systems analyst or programmer fancy the challenge?
Logged

Howard Jones

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1203
Re: 3 fingers or 4?
« Reply #64 on: August 26, 2009, 05:16:12 PM »

On other instruments, the aim is to make the flow of a sequence of notes as efficient as possible.
Partly, but the aim might also to get the right tone (an open string versus a stopped string, for example), or to add bounce to the music from a particular picking or bowing pattern.

Quote
Many melodeon players use bellows reversals to add "bounce" to the music, which can mitigate against the most efficient fingering patterns.
True, but that's not the only way to bring bounce to the music.

I just don't buy this idea that melodeon players are somehow uniquely hard done by.  Yes, we face certain problems inherent in our instrument, and there any number of ways of overcome these - including allowing the instrument to impose a certain way of playing, and accepting it.  But players of other instruments face their own difficulties.

Whatever instrument you play, you'll have to work out the best fingering for a particular piece.   Even if you're a singer, and don't play an instrument, you still have to think about breathing and phrasing. It takes time to work on a piece, and you then have to learn and remember it, with or without written annotations.  That's all part of being a musician, regardless of what you play - no one said it would be easy.  

As for those who make it look easy, remember that's the result of hours of study and practice, and often raw talent as well.

« Last Edit: August 26, 2009, 08:34:49 PM by Howard Jones »
Logged

Howard Jones

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1203
Re: 3 fingers or 4?
« Reply #65 on: August 26, 2009, 05:28:52 PM »

Chris, the CADB tab system shows the button numbers above ("P" = poussez - push) or below ("T" = tirez - pull) a line.  The rows are indicated by apostrophes next to the number so 3 indicates the third button on the first row, 3' the third button on the second etc.  Which finger to use can also be identified (the system uses French abbreviations but you could adapt it to English).

It's all explained here:

http://diato.org/exptab2.htm

If you are playing from someone else's tab then it assumes you have a similar button layout but if it's just for recording your own arrangements it doesn't matter if you have a non-standard keyboard.

The TablEdit program will create tablature for diatonic accordion as well as many other instruments.  Unfortunately it's not based on a D/G box (I can't recall what the tuning is, but I think it's G/C).  You could use it if you transposed the tunes first.  Whether the computer can also work out the best fingering is doubtful, as it's a question of musical judgement as well as technique.

www.tabledit.com

Falseknight

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 449
    • False Knight
Re: 3 fingers or 4?
« Reply #66 on: August 27, 2009, 10:25:27 AM »

For the record, I don't think melodeon players are hard done by.  It's like anything else - you play to the strengths of your instrument and technique.
Logged

Tyker

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 354
  • Cheviot C#DG,Hohners D and G/C
Re: 3 fingers or 4?
« Reply #67 on: August 27, 2009, 12:59:19 PM »


Quote
The TablEdit program will create tablature for diatonic accordion as well as many other instruments.  Unfortunately it's not based on a D/G box (I can't recall what the tuning is, but I think it's G/C).  You could use it if you transposed the tunes first.  Whether the computer can also work out the best fingering is doubtful, as it's a question of musical judgement as well as technique.



The default tuning is G/C though you can create your own layout . This is fraught , though , as spaces have to be deleted . ... The best fingering is not worked out ,as far as I can tell .
« Last Edit: August 27, 2009, 07:12:23 PM by Tyker »
Logged
Graeme - North Hampshire,UK

There is no noun that can't be verbed

Howard Jones

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1203
Re: 3 fingers or 4?
« Reply #68 on: August 27, 2009, 01:29:38 PM »

Thanks Tyker, I was relying on memory as I don't have TablEdit and it's some time since I looked at the trial version.  I didn't realise it was possible to specify another tuning for melodeon, but I don't doubt you're right that it's rather complicated to do.

I don't see how any computer could work out the "best" fingering, since no two players will agree on what is "best" - in any session, just watch the bellows going in different directions as people play the same tune in different ways.  It's a matter of taste and judgement at least as much as it is about technique.

[dragthethreadkickingandscreamingbackontopic]
The computer would also have to know whether the player favoured three fingers or four  ;)
[/dragthethreadkickingandscreamingbackontopic]

Stiamh

  • Old grey C#/D pest
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3611
    • Packie Manus Byrne
Re: 3 fingers or 4?
« Reply #69 on: August 27, 2009, 02:33:23 PM »

X:1
T:Morpeth Rant
M:4/4
L:1/8
K:D
(3ABc|:"D"d2AG FDFA|"G"BGBd "A"cAce|1"D"d2 ef "G" gfed|"A"c2 e2 e2 (3ABc:|2"D"d2 ef "Em" gfec|"A"A2 "D"d2 d4|


The first time through, in the third bar I'd use the middle finger on the push G (G row) against the G chord, on the repeat I'd use the little finger for the pull G on the D row (against the pulled Em chord).  But if we ever find ourselves in the same session, I can't guarantee I'll play it like this!


OK Howard, I give up  ;D. In suggesting the Morpeth Rant I was thinking I might be able to show you how the 3-finger method works in practice on a one-row tune we have in common so that you could try it and understand what people such as Rees and Andre and myself see as the benefits. But I'm stymied with the cross-rowing, since I don't have a "QB" and can't try the 3-finger approach using the same buttons as you. But thanks again for starting the topic, it's been illuminating.

Chris - I wondered whether you might be joking in throwing out the challenge to a programmer to devise "best fingering." I don't think the result would be very satisfactory, for the reasons Howard mentioned, and also because we all have different sized hands! But even if it were possible, I would hate the idea. Whatever way I end up playing any instrument in the folk tradition, it's important to me that it's my technique, that I have experimented with and worked on and made my own, regardless of any help and pointers received. I'd really encourage you to study what works for you and go down the path Howard recommends - building up a toolkit of patterns and habits that do the job.

Rob2Hook

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2278
  • Castagnaris, Hohners & Baffetti
Re: 3 fingers or 4?
« Reply #70 on: August 27, 2009, 04:49:52 PM »

Surely both?  The three-finger approach is more akin to the playing of scales, i.e. runs, on a piano allowing the wrist to turn easily when repositioning the hand.  When there is a good stretch between notes, then sometimes the little finger comes into play, else you miss the jump.  That is particularly suited when stretching momentarily from the high notes back to the accidentals on a two row. Taking a recent example from the forum, try playing the accidentals in the B part of In the Toyshop without using that little finger!  Incidentally, it's a bitch on the Castagnari reversed accidentals.

Rob.
« Last Edit: August 27, 2009, 04:51:43 PM by Rob2Hook »
Logged

Howard Jones

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1203
Re: 3 fingers or 4?
« Reply #71 on: August 27, 2009, 06:34:43 PM »

Steve, I'd be equally stymied with a half-step box, so it's not surprising we can't really share our approaches to the tune.  I hardly ever play a tune on just one row, unless I'm deliberately going for a "one-row sound", which can  really suit some tunes.  Usually I'll be playing runs across the rows, right hand chords, octaves, and random twiddly bits.

I've just tried playing Morpeth Rant on just one row, and I agree it's much harder to bring in the fourth finger, and I'm far less tempted to do so, than when I play it on two rows.

I can absolutely understand why 3 fingers are better for anything fast or complicated, and for anything like that I'll usually be using 3 fingers too. The fourth only comes into play (a) when there's a good reason and (b) when it's not too difficult. 

Especially (b)  ;)

Howard Jones

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1203
Re: 3 fingers or 4?
« Reply #72 on: August 27, 2009, 06:39:06 PM »

That is particularly suited when stretching momentarily from the high notes back to the accidentals on a two row.

Tell me about it!  I play a 23-button Saltarelle Nuage, which has the low notes and accidentals - useful to have both, but a loooong stretch to reach past the low notes to reach the accidentals.

Chris Ryall

  • "doc 3-row"
  • French Interpreter
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 11153
  • Wirral UK
    • Chris Ryall
Re: 3 fingers or 4?
« Reply #73 on: August 28, 2009, 03:08:29 AM »

While some might think this off topic - I can personally recommend mowing your lawn as a means to improving manual dexterity. You know that time when the grass blower vent on the petrol mower blocks? Well a finger flicked into the slot can free it without the bother of stopping the engine.

One fortunate side effect of this practice is when you get the flick wrong and the blade tips jams onto the tip of your index finger. While this can be exquisitely painful - it is well worth it as you then have to refinger all your melodeon tunes for fingers 2-3-4 for the next month or so.

So I'd like to personally recommend motor mowing to all here as the perfect way to get that pinky (sorry) moving in the tunes. The 'obvious' alternative of simply sitting down and force-playing those tunes with the outer fingers also works, but it won't get that lawn cut.

.. worked for me  ???

What's a grass blower?

I did say "grass blower vent" - the hole on the side whence the grass cuttings come into the collecting basket (until it blocks)  >:E
« Last Edit: August 28, 2009, 11:00:53 PM by chrisryall »
Logged
  _       _    _      _ 

Falseknight

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 449
    • False Knight
Re: 3 fingers or 4?
« Reply #74 on: August 28, 2009, 07:42:43 AM »

What's a grass blower?
Logged

Howard Jones

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1203
Re: 3 fingers or 4?
« Reply #75 on: August 28, 2009, 08:41:18 AM »

By the end of the summer (summer? what summer?) you'll have a perfect lawn, and the ability to play all your melodeon tunes with a single finger.

rees

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 5055
  • Windjammer
    • Wesson Accordions
Re: 3 fingers or 4?
« Reply #76 on: August 28, 2009, 10:20:30 AM »

I remember attending a workshop on Zydeco accordion run by Roy Carriere, a well respected Louisiana musician. I couldn't work out what he was doing with the right hand until it dawned on me that his index finger was missing!
Logged
Rees Wesson (accordion builder and mechanic)
Gungrog, Welshpool, Wales, UK
www.melodeons.com

rees

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 5055
  • Windjammer
    • Wesson Accordions
Re: 3 fingers or 4?
« Reply #77 on: August 28, 2009, 10:26:32 AM »

I've just been watching the Charlie Harris clips on the Bellows Tape thread. He's most definitely a three finger man and what a player!
Logged
Rees Wesson (accordion builder and mechanic)
Gungrog, Welshpool, Wales, UK
www.melodeons.com

Howard Jones

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1203
Re: 3 fingers or 4?
« Reply #78 on: August 28, 2009, 11:02:09 AM »

Hemeto Pascoal, as seen in the video Andy Cutting linked to, appears to use three fingers.

I wonder whether it's something to do with the mechanics of the hand, and trying to use the little finger when playing really fast actually slows down the other fingers, so it's better to keep it out of the way.  I don't think I've noticed that effect, but I don't play anything nearly as fast as Hermeto is doing in that video.  I wouldn't use the little finger as much if I were playing reasonably fast, simply because I can't control it so well at speed. 

HallelujahAl

  • Guest
Re: 3 fingers or 4?
« Reply #79 on: August 29, 2009, 08:31:57 AM »

Quote
Hemeto Pascoal, as seen in the video Andy Cutting linked to, appears to use three fingers.
Obviously Hermeto also has a lawn and a dodgy lawn-mower ;D
Logged
Pages: 1 2 3 [4] 5   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal